💡 The answer in 60 seconds

There is no best spark plug for every car; there is the plug your car's maker specifies for your engine. The plug for your car is the one your own owner's manual or maintenance guide specifies for your engine; where the manual prints no part number, ask a dealer or use the maker's parts site, and do not take a plug type from a brand's box or a marketplace listing.

The documents we read say it in different words. Toyota's guides: install new plugs of the same type as originally equipped. Nissan: replace plugs with recommended or equivalent ones. Hyundai and Kia (Canada): install the correct heat range. Mazda, Nissan and Subaru print a plug code for each engine, which can differ inside one model, and a Toyota specification page says to use only iridium-tipped plugs. Then compare three things on the box against the manual: the part number or type, the heat range and the gap. The plug makers print them differently, and their heat numbers run in opposite directions: NGK's lower number is hotter, Champion's higher number is hotter.

After that, the choice is between brands and lines, and this page lists what NGK, Denso, Autolite, Bosch, Champion and ACDelco print about theirs, alphabetically and without a ranking. Compare the guarantee (Autolite prints lifetime for two iridium lines, Bosch and Champion seven years on iridium lines; Autolite, Champion and ACDelco print conditions) and where you buy: NGK and Champion say marketplace purchases are not covered.

A flashing check engine light means an active misfire: pull over safely, switch the engine off and have the car towed; the only exception, a flashing light alone on a car that starts and runs normally, is a shop within 2-3 miles, reached gently, under 40 mph with light throttle; never for a car that will not start. A new plug does not fix every misfire. PulsCar sells no spark plugs, no plug brand pays us, and there is no affiliate link on this page. We did not test any plug.

This guide is a way to choose, built from what vehicle makers and spark plug makers print in owner's manuals, maintenance guides and their own web pages, plus the federal texts that bear on parts and warranties. Each source is named and was read on 15 November 2026. ⚪ marks a plug maker's or car maker's own statement about its own product, which is a claim, not proof; 🟢 marks statute or government text. Where sources disagree we show both and do not average them. No plug maker's page we read printed a plug price in dollars, so this page prints none: our spark plug replacement cost guide is where the money question lives, and our guide to when to replace spark plugs is where the intervals and the plug makers' life figures live. This page answers one question: which plug to buy, and what to match.

Which spark plugs should I buy, and what does PulsCar have to do with the choice? Nothing at all: PulsCar publishes this guide and sells no spark plugs, and no plug brand pays us. The useful order is the one the documents give, from the car maker outward. First the plug your car's maker specifies for your engine, found in the owner's manual or with a dealer. Then the three printed details that have to match: part number or type, heat range and gap. Then, and only then, the brand and line, where the printed differences are the electrode material, the warranty and the seller. Our reading: the maker's interval and the heat range it was designed for both assume the plug the car was built to use, and a different plug changes both.

Start with what your car's maker prints

Eight car makers in the documents we read say something about which plug to install. The grid below gives each as printed, with the model year and the document. A mark of ⚪ means the maker describing its own part or policy.

Toyota 2024 Corolla, 2023 RAV4, 2022 RAV4 Hybrid, 2024 Prius Prime, 2024 Tundra and 2025 Camry guides: "Install new plugs of the same type as originally equipped. A qualified technician should perform this operation." ⚪
same type as originally equipped
Nissan 2023 Altima, 2023 Rogue: "Always replace spark plugs with recommended or equivalent ones." Both 2023 schedules add: install new plugs of the type as originally equipped ⚪
recommended or equivalent
Toyota digital owner's manual specification page (code OM0R024U; the page we read does not name the model): prints the make and part "DENSO FC16HR-Q8", a gap of 0.031 in (0.8 mm), and "Use only iridium-tipped spark plugs. Do not adjust the spark plug gap." ⚪
model not named; example only
Infiniti 2025 QX60: "Install new plugs of the same type as originally equipped." ⚪
same type as originally equipped
Hyundai 2023 Elantra and 2023 Tucson Hybrid, Kia 2023 (Canadian edition): "Make sure to install new spark plugs of the correct heat range." ⚪
correct heat range
Subaru owner's manual (file MSA5M2403A, 2.5 L and 2.4 L models, edited December 2022): names a plug per engine, DILKAR7Q8 (NGK) and SILKFR8A6 (NGK), and says the plugs may be difficult to replace and recommends that your Subaru dealer do it ⚪
NGK code per engine
Chevrolet 2023 Equinox: its maintenance parts table lists four GM spark plug part numbers, the first (12683541) with an ACDelco number, 41-156, and its technical data prints the gap: "Spark plug gaps are preset by the manufacturer. Re-gapping the spark plug is not recommended and can damage the spark plug." ⚪
four GM part numbers
Mazda CX-5, CX-30, CX-50 and CX-90 owner's manuals (2024 model-year files): "Mazda Genuine spark plug" with a Mazda part code per engine; the manuals say to consult or contact an Authorized Mazda Dealer for details ⚪
Mazda part code by engine

Three readings follow from the grid. First, no manual we read says any brand will do; the rules point to the type the car was built with (Toyota, Infiniti, Nissan), to an equivalent (Nissan, Infiniti), to the heat range (Hyundai, Kia) or to the maker's own part code (Mazda). Second, only some manuals print the part: Mazda, Nissan, Infiniti, Subaru, Chevrolet and one Toyota specification page do, while the Hyundai and Kia (Canada) pages we read name no part number and no gap, and the Toyota maintenance guides name none either. Third, brands appear only where the maker prints them: Toyota's page says Denso, Subaru's says NGK, Chevrolet's table gives its own GM and ACDelco numbers, and for Nissan and Mazda we do not infer a brand from a code.

Toyota's guide also carries a footnote worth reading: for the 2024 Corolla it says "Maintenance services of spark plugs are required under the terms of the Emissions Control Warranty." Hyundai's 2023 handbook adds a line about parts: "It is recommended that any replacement parts used for maintenance or for the repair of emission control systems be new or remanufactured Hyundai Genuine Parts." and, in capitals, that the owner may elect to use non-genuine parts, though parts that are not equivalent may impair the effectiveness of the emission control system. ⚪ Subaru's 2023 and 2024 booklets say it recommends Genuine Subaru Replacement Parts and allow other parts, with the cost of that service or parts not covered under the emission warranty. ⚪ A later section looks at what federal text adds.

The part depends on the engine, the market and the trim, not the model name

Where a manual prints the part, it prints it by engine, and the engine can change inside one model. The grid gives what the specification pages we read print, with the model year and engine as printed. These are not recommendations for your car; they show how the match works.

Nissan 2023 Altima, 2.5L (PR25DD): plug DXE22H11C, gap 1.1 mm (0.043 in) ⚪
DXE22H11C, 1.1 mm
Nissan 2023 Altima, 2.0L turbo (KR20DDET): plug DILKAR7N9HG, gap 0.9 mm (0.035 in) ⚪
DILKAR7N9HG, 0.9 mm
Nissan 2023 Rogue, 2.5L (PR25DD): plug DXE22H11C, gap 1.1 mm (0.043 in) ⚪
DXE22H11C, 1.1 mm
Nissan 2023 Rogue, 1.5L (KR15DDT): plug ILMAR8G8GS, gap 0.8 mm (0.031 in) ⚪
ILMAR8G8GS, 0.8 mm
Infiniti 2025 QX60, 2.0L (KR20DDET): plug DILKAR7N9HG, gap 0.9 mm (0.035 in) ⚪
DILKAR7N9HG, 0.9 mm
Chevrolet 2023 Equinox, 1.5L L4 (VIN code G, automatic): gap 0.60 to 0.70 mm (0.024 to 0.028 in); its parts table lists four plug numbers and names no engine ⚪
0.60 to 0.70 mm
Mazda CX-5 (2024 file): SKYACTIV-G 2.5 in the U.S.A. and Canada, P5SP-18110; the same engine in Mexico, PE5R-18-110-A or PE5S-18-110; SKYACTIV-G 2.5T, PY8V-18-110 ⚪
US/Canada code differs from Mexico
Mazda CX-30 (2024 file): four rows with three different codes (P5SP-18110 with cylinder deactivation, PE5R-18-110-A or PE5S-18-110 for e-SKYACTIV G and for the 2.5 without it, PY8V-18-110 for the 2.5T) ⚪
3 codes across 4 rows
Mazda CX-50 (2024 file): 2.5 prints PE5R-18-110 or PE5S-18-110 (no "-A"), 2.5T prints PY8V-18-110 ⚪
no "-A" suffix here
Mazda CX-90 (2024 file), e-SKYACTIV G: H301-18-110 or H302-18-110 ⚪
H301 or H302

Four things stand out. The Altima 2.5L and the Altima 2.0L turbo take different plugs with different gaps in the same model year, and the turbo plug code and gap are the same as the 2025 Infiniti QX60 prints for its 2.0L, which uses the same engine code in Nissan's table. The Rogue's 1.5L is a third code. Mazda's CX-5 prints different codes for the same engine in the United States and Canada and in Mexico, and the CX-50's code for the 2.5 is printed without the "-A" suffix that the CX-5 and CX-30 print, so a code remembered from one Mazda is not a safe guide to another. And some print no plug code: the Toyota maintenance guides and the Hyundai and Kia documents we read print none. If your car is one of those, the part number is in the dealer's parts system or in the plug maker's catalog, and the manual tells you what rule to check it against.

Mazda adds a caution that belongs to the matching question: "When cleaning the iridium plugs, do not use a wire brush. The fine particulate coating on the iridium alloy and platinum tips could be damaged." ⚪ Nissan's Altima and Rogue manuals say not to clean or re-gap their iridium-tipped plugs. The practical meaning, our advice, is that a plug is a replacement part and not a cleaning job: where your manual says not to clean an iridium plug, as Nissan's does, replace it.

Looking it up: the plug makers' part finders

Every plug maker we read has a look-up. They differ in what they ask. NGK's part finder offers cars, trucks and SUVs among its applications and a VIN or license plate option. ⚪ Denso's Find My Part searches by year, make, model, engine, trim and part type, by a Denso part number, by a competitor's part number, or by VIN. ⚪ Autolite's heat-range page says to enter the make, model and year of the car to find the plug in the correct heat range, and Champion's plug pages carry a box to search by vehicle year, make and model. ⚪ Bosch's pages offer a catalog for your vehicle and, on its product pages, a lookup that takes a part number and a vehicle make and returns the years and models. ⚪

The makers also print why a finder answer should be checked. NGK says "A spark plug part number might fit hundreds of different engines from many different manufacturers." ⚪ Autolite says "spark plugs, and glow plugs are not universal" and "They must match your vehicle's specific engine requirements." Its answer for the matching process is that it measures the original plug, runs it in a "rating engine" to learn its heat range, and matches an Autolite plug to that heat range and those dimensions. Champion's gap pages say to consult the owner's manual or the Champion catalog for the recommended setting. ⚪

Our advice: do the match in two directions. Write down what the manual or the dealer says for your engine (part code, or the rule such as same type as original). Run the finder and compare. If they disagree, do not guess which is right: the manual is the car maker's document and the finder is a catalog, so bring both to a dealer's parts counter.

Reading a plug number: three makers, three codes

A plug number encodes the details a buyer compares, and each maker's code is its own. The three pages we read:

NGK ⚪ every plug has a plug number (the one labeled on the plug, for example DPR5EA-9) and a stock number (for example 2887), both printed on the box; the stock number is a random 3-, 4- or 5-digit number "and has no relation to heat range or plug type"; the design symbols chart is in the front of every NGK catalog
plug number, not stock number
Champion ⚪ the letters and numbers are "a logical formula" for the design: R for a resistor type, a letter for the shell design (thread, reach, seat, hex), the number for the heat range, letters for the firing end design, a last number for the gap designation
letters and numbers by position
Denso ⚪ its part-numbering page lists letters for the type of precious metal (for example P for platinum, S for 0.7 mm iridium, SV for 0.4 mm iridium), letters for thread diameter and hex size (for example K for 14 x 16.0), and a heat-range table showing Denso, NGK, Champion and Bosch numbers side by side
letters by position

Two points matter more than the code itself. The first is the heat number direction. NGK's page says "lower numbers indicate a hotter type, higher numbers indicate a colder type." Champion's says "within a given plug family the plugs run hotter as the number gets higher." A buyer who sees a higher number on a box and thinks colder, or hotter, will be right for one brand and wrong for the other, which is what Denso's cross-reference table addresses and why this page does not print a heat-number conversion of its own. Champion adds that the numbers "don't indicate degrees; they're product codes to give an indication of the heat range." The second is the resistor. Champion says an R in its code means a resistor plug, and that "Resistor type spark plugs reduce the amount of radio frequency interference (RFI) that can cause ignition misfires and static on the radio." NGK's page on its OE iridium line says some of its OE plugs have special resistors or multiple ground electrodes, depending on the original equipment requirements. A plug that matches in material but not in resistor or ground-electrode design is not the same plug.

Champion's code guide also prints a line about the gap that explains why gaps are not arbitrary: "the wide gaps are required to meet federal and California requirements." ⚪ That is Champion's statement about its own gap designation, not a federal rule we read.

Heat range: what the makers print, side by side

The heat range is how fast the plug carries heat away from its tip to the cylinder head. NGK's page says "The spark plug heat range only indicates the rate that the spark plug dissipates its firing end heat to the engine." A hotter plug has a longer heat path and keeps more heat at the tip, a colder one a shorter path. ⚪ NGK says the tip must be hot enough to burn off carbon (self-cleaning, about 450 degrees C) and cool enough to avoid pre-ignition, and that the two most common causes of plug problems are carbon fouling and overheating. The tip temperature difference between adjacent heat ranges within one plug type is "approximately 70°C to 100°C" by NGK's text, while Autolite's page says a switch in heat range changes the tip temperature by "50 to 150 degrees depending on design". The two makers give different ranges (Autolite prints no unit), and neither converts to the other's numbering.

What to do with the heat range is where the makers' printed advice divides, and the table shows it without choosing.

NGK ⚪ "For most vehicles, the factory recommended heat range is sufficient"; hotter plugs are used for fuel delivery or oil consumption problems, but "Installing a hotter heat range plug will reduce the pre-ignition safety margin, so it is better to correct the mechanical or tuning issue instead of changing the plug heat range."
factory range; fix the cause
Champion ⚪ "For most vehicles, the manufacturer-recommended spark plug and heat range is the best option." Too cold risks fouling, too hot risks overheating and pre-ignition
manual first
Autolite ⚪ if unsure, "always start with a colder spark plug"; a too-cold plug "will eventually foul and a misfire will occur" and "This will not hurt the engine"; and "Don't go to a hotter heat range unless you've consulted your engine experts."
Autolite's if-unsure rule
Hyundai 2023 Elantra and Tucson Hybrid, Kia 2023 (Canada): "Make sure to install new spark plugs of the correct heat range." ⚪
correct heat range

Autolite's advice to start with a colder plug is addressed to someone who does not know the range. It sits next to NGK's statement that a plug of the wrong range can cause carbon fouling or overheating, and next to the car makers' rule to install the correct range. Our advice is to avoid the situation: the correct range is in the plug the manual specifies, and nothing on this page says to change it. The colder-plug advice on NGK's modified-engines page is about modified engines, and Champion's page puts choosing by performance under modified engines. NGK's page on modified engines says a modification that does not alter the overall compression ratio, such as a free-flowing air filter or headers, will not necessitate changing plug types or heat ranges, and that for modified engines with higher cylinder temperatures "a colder heat range spark plug" is usually needed, with its rule of thumb of one step colder for every 75 to 100 horsepower added. ⚪ That is a tuner's rule for an engine whose maker's plug is no longer a match, not an instruction for a stock car, and Champion likewise says that for modified engines you select a plug based on the performance you want to achieve.

Whether a factory turbo car counts as a modified engine is not a question the plug makers answer. NGK lists forced induction among the factors that raise tip temperature and says a colder plug may be necessary; a factory turbo car arrives with the plug its maker chose for the boost. Bosch prints a line for turbocharged direct-injection engines, Champion one for turbocharged engines (below), and NGK prints a turbo-recommended design, and each of these is a line to choose among when the application matches, not a reason to change the heat range.

Gap: the number in the manual, and who is allowed to touch it

The gap is the distance between the center electrode and the ground electrode, and the voltage needed to jump it rises with it. NGK says "While plugs are pre-gapped from the factory, the gap may need to be adjusted for the vehicle that the spark plug is intended for." ⚪ Champion says the gap setting is different for each vehicle but most are somewhere between 0.028 and .060 inch, and to consult the owner's manual or the Champion catalog for the recommended setting. The car makers' printed gaps in the grid above run from 0.60 to 0.70 mm on a Chevrolet 1.5L to 1.1 mm on the Nissan 2.5L.

What the makers print about adjusting, side by side:

Chevrolet 2023 Equinox: "Re-gapping the spark plug is not recommended and can damage the spark plug." ⚪
do not re-gap
Nissan 2023 Altima: "Do not service iridium-tipped spark plugs by cleaning or regapping." The 2023 Rogue says not to reuse its iridium platinum-tipped plugs by cleaning or regapping ⚪
do not re-gap iridium
NGK ⚪ "It is always best to check the gap against the manufacturer's specifications"; if adjusting a fine-wire plug, move only the ground electrode and never pry on the center electrode; no more than +/- 0.008 in from the factory preset
check; move the ground only
Denso ⚪ Iridium Power: "In most cases your Iridium Power plugs do not need to be gapped." Denso Europe (2020, European page): technicians "should never change the gap on platinum, iridium or TT spark plugs"
usually no adjustment
Autolite ⚪ pre-gapped in the most popular sizes, but "no one offers spark plugs properly gapped for every application"; check and adjust as necessary at installation
check at installation
Champion ⚪ plugs are usually pre-gapped; "It is advisable to double check that the gap is correctly set to the vehicle's recommended setting when installing spark plugs."
double check

NGK, Autolite and Champion say to check the gap, NGK and Champion warn against prying a fine wire, and Denso says not to let the tool touch the iridium electrode. They differ on whether any adjustment is acceptable, and their wording on gauges differs. Denso's installation guide for Iridium Power says "Never use a round gapping tool to check the gap or to increase or decrease the gap setting." NGK recommends "a round wire-style or pin gauge gap tool", Autolite's tip says to use "a round, or loop, feeler gauge", and Champion's page lists feeler gauges as ideal for iridium and says a coin-style gauge should not be used with iridium plugs. ⚪ We cannot settle a difference between makers about their own plugs. Our advice for a buyer: check the gap against the manual's number with the gauge type your plug maker names. If it is off and your manual says not to re-gap, do not bend it: return the plug or have a technician deal with it.

NGK adds that a gap that is too large can cause misfires, and that the right gap for an engine with more compression or forced induction is a smaller one, with its rule of about 0.004 in for every 50 hp added. That is another statement about modified engines. ⚪

Materials in one short section: what the makers name, and where the comparison lives

Copper, platinum, iridium and now ruthenium are the words on the box, and the makers use them differently, so this page keeps to what matters for matching. The material comparison and the life figures the makers print are the subject of our separate iridium versus platinum spark plugs comparison; this page does not restate them.

Three printed points bear on a purchase. First, NGK says the term copper plug is incorrect: standard plugs do not have electrodes made from copper, which is soft with a low melting point; a standard plug uses a nickel alloy that may include a small copper core, and nearly all NGK plugs, including its iridium and platinum plugs, have a copper core. ⚪ A box that says copper is describing a standard nickel-alloy plug with a copper core. Second, Autolite says it always recommends replacing its plugs "with the same metallurgy as your OE plug or upgrade to iridium", and its page on bad plugs lists "Using an inferior plug with different metallurgy or design. E.G. copper plug instead of Iridium fine wire" among the causes of fouling. ⚪ That is a maker's claim about its own product range and it points the same way as the manuals: do not go below the original. Third, for waste-spark ignition NGK ties the material to the car, and Autolite's Double Platinum page says its plug is "Ideal for distributorless ignition system (DIS) engines". ⚪ Whether your engine has that kind of ignition is a manual or dealer question; the comparison page quotes NGK's passage. A platinum plug of the wrong heat range is still a wrong plug.

OE-style lines: what the makers mean by the words

Each plug maker has a line it describes as an original-equipment match, and the words differ. The printed claims:

ACDelco ⚪ the shared GM and ACDelco parts page says "GM Genuine Parts and ACDelco OEM parts are designed, engineered, tested and backed by GM"; and that ACDelco parts "represent premium aftermarket components validated by General Motors for both GM and non-GM vehicle platforms"
GM-validated line
Bosch ⚪ Double Iridium: "advanced original equipment (OE) spark plug technology"; Double Iridium Pin-to-Pin: "manufactured to be original equipment (OE) equivalent in fit, form and function"
OE equivalent in fit, form, function
Champion ⚪ Champion OE: "Built for your OE needs, with OE specs"
OE specs
NGK ⚪ OE-Style line: "delivering OE fit, form, function and performance for your engine"; Laser Iridium is "designed alongside OEMs"; Iridium IX is an aftermarket plug that, where recommended, is an appropriate replacement for OEM spark plugs
OE-Style; Laser; Iridium IX

These are claims, not certifications, and apart from GM's page for GM Genuine and ACDelco OE parts, no page says that a given OE-style plug is the one your car left the factory with; NGK says its line brings "that original equipment spark plug" to the aftermarket. NGK's page on Iridium IX states the difference plainly: "Every plug in the Laser Series was designed for an OEM application." and Iridium IX is "a single precious metal aftermarket performance plug", a great option for modified engines and, "where recommended", an appropriate replacement for OEM plugs. ⚪ Our reading: the words where recommended are the buyer's cue, and the recommendation should come from the car maker's rule, not from the box.

Each maker's lines and guarantees: alphabetical, no ranking

This is not a ranking. Rows are alphabetical by maker, each line is described in the maker's own words from its own page on 15 November 2026, and the right-hand cell gives the guarantee the same page or the maker's warranty page printed, with its conditions in the next section. We did not test any plug. We could not read Motorcraft's pages (403), so Ford's plug maker is missing, not assumed, and no price is printed because no page we read printed a price with a date.

ACDelco ⚪ a 100,000-mile limited warranty text for its iridium plug (document dated December 2003); "Approved applications are located in the ACDelco Spark Plug Catalog." the GM and ACDelco spark plug page (its text names no plug line) says most GM Original Equipment and Gold lines carry a 24-month, unlimited-mile limited warranty
100,000 mi (2003 warranty)
Autolite Copper ⚪ "quick starts, dependable ignition"; copper core center electrode, high nickel alloy electrodes
2-year limited
Autolite Platinum ⚪ platinum tipped center electrode; "for older engine applications"
4-year limited
Autolite Double Platinum ⚪ platinum to platinum; "Ideal for distributorless ignition system (DIS) engines"
5-year limited
Autolite Iridium XP ⚪ iridium and ruthenium-enhanced finewire with a platinum tipped ground electrode, tapered ground wire
lifetime limited
Autolite Iridium Ultra ⚪ laser-welded iridium and ruthenium-enhanced finewire; "OE-quality performance"
lifetime limited
Bosch EVO ⚪ for "turbocharged gasoline direct injection engines"; dielectric strength "greater than 45 kV"
7-year satisfaction
Bosch Double Iridium, Double Iridium Pin-to-Pin, Iridium ⚪ iridium center electrode, OE technology; Double Iridium adds an iridium ground electrode
7-year satisfaction
Bosch Double Platinum ⚪ double platinum line; its life claim is covered in our iridium versus platinum comparison
5-year satisfaction
Bosch Platinum ⚪ platinum line; its life claim is in the same comparison
4-year satisfaction
Bosch Nickel with Copper, Platinum+4 ⚪ no guarantee printed on the page we read
none printed
Champion Iridium ⚪ iridium center electrode, fine-wire, V-trimmed ground electrode; "Regardless of engine, manufacturer or ignition type"
7 years or maker interval
Champion Double Platinum Power ⚪ platinum center and ground electrodes, fine-wire center
5 years or maker interval
Champion Platinum Power ⚪ platinum center electrode, nickel alloy
3 years or maker interval
Champion Copper Plus ⚪ copper-core center electrode
2 years or maker interval
Champion OE ⚪ OE specs; ceramic "for high-boosted engines"; iridium and platinum electrodes
no separate term printed
Denso OE-Type Series ⚪ Double Platinum, Iridium Long Life, Original U-Groove
term not printed
Denso TT Series ⚪ Iridium TT: 0.4 mm iridium center electrode, 0.7 mm platinum needle ground electrode; Platinum TT
term not printed
Denso High Performance Series ⚪ Iridium Power, Iridium Racing
term not printed
NGK Ruthenium HX ⚪ two designs: DFE, "recommended for non-turbo applications"; PSPE, "recommended for turbo and supercharged engines"
term not printed
NGK Iridium ⚪ Iridium IX (aftermarket performance); Laser Iridium (designed alongside OEMs)
term not printed
NGK Platinum, Nickel, OE-Style ⚪ G-Power platinum with a .6 mm fine-wire center electrode; Laser Platinum; a nickel plug with a 98% pure copper core; OE-Style
term not printed

The situations the makers name are narrower than the shelf suggests. Turbocharged or supercharged engines: Bosch names EVO for turbocharged gasoline direct injection engines, NGK recommends its PSPE Ruthenium HX design for turbo and supercharged engines, and Champion says its OE plug optimizes insulation for high-boosted engines. ⚪ Distributorless ignition: Autolite names Double Platinum as ideal; for waste-spark systems, NGK says cars often use OE Iridium or OE Platinum. Older engines: Autolite's Platinum is described for older engine applications. A plain nickel or copper plug: NGK (Nickel), Autolite (Copper), Champion (Copper Plus) and Bosch (Nickel with Copper) each list one, to be matched to your manual. A GM car: GM says it validates ACDelco parts for GM vehicles. A modified engine: NGK's Iridium IX and Denso's High Performance series are the lines those makers describe for performance, and the statements about heat range and gap for modified engines above apply.

None of the makers we read prints a mileage as an instruction for your car or tells you to skip the finder: each maker's lines are sold for the applications its finder lists.

Guarantees and warranties: what is printed, and the conditions

A guarantee is the one printed difference between lines that has conditions you can read. They differ in length, in what they replace and in what voids them.

Autolite Iridium XP ⚪ warranted to the original purchaser "for the lifetime of the vehicle engine against plug failure due to electrode erosion or defects in materials and workmanship"; the remedy is that Autolite "will, at its option, replace or refund the purchase price"; not transferable, valid for as long as the original purchaser owns the vehicle; and "Always follow vehicle manufacturer's recommended change intervals if vehicle is under manufacturer warranty."
engine lifetime, original owner
Autolite Double Platinum ⚪ "five years from the date of purchase against defects in materials and workmanship"; no service if the plugs are not installed properly (including errors in application) and "maintained in accordance with service intervals recommended by the original equipment manufacturer"
5 years, with conditions
Champion ⚪ Iridium: 7 year unlimited mileage guarantee or the manufacturer's recommended change interval, whichever comes first; Double Platinum Power 5 years; Platinum Power 3 years; Copper Plus 2 years; "Cost of removal and installation are not included"
7, 5, 3, 2 years
Bosch ⚪ satisfaction guarantees of 7, 5 and 4 years by line on its category page; the terms behind them were not on the page we read
terms not read
ACDelco ⚪ iridium: replaces a plug that fails due to a defect in materials or workmanship for up to 100,000 miles; excludes labor, racing and commercial use, and "Replacement of this product as a result of vehicle manufacturers' recommended replacement maintenance intervals."
2003 text; defects only
Denso ⚪ "For all warranty claims, consumers must contact the business where the product was purchased."
claim through the seller

Reading the table, a few things follow from the words. A long guarantee does not extend your interval: Champion's ends at the earlier of its years or the car maker's recommended change interval, Autolite's Double Platinum text requires maintenance to the maker's intervals, and ACDelco's excludes replacement made because of the maker's interval. Labor is not covered where the text says so (Champion, ACDelco). The Autolite lifetime term is a promise about electrode erosion and defects, limited to the original purchaser while they own the vehicle.

The US Denso warranty statement we read says only that claims go to the seller, and Denso Europe (2020, European page) says a gap change beyond the material limits invalidates its warranty, so read the terms on the box for the line you buy. The ACDelco iridium warranty we read is a December 2003 document hosted on a parts retailer's site, and a later ACDelco warranty may exist; the GM and ACDelco spark plug page (its text names no plug line) says most GM Original Equipment and Gold lines carry a 24-month, unlimited-mile limited warranty, honored online or at a dealer for official parts, with a footnote we could not read.

Where you buy matters: sellers, marketplaces and counterfeits

NGK, Champion and Denso tie their warranty terms to the seller, and they say it in warranty terms before they say it in warnings. NGK's page for US buyers lists authorized retailers (among them Advance Auto Parts, AutoZone, NAPA, O'Reilly Auto Parts, SparkPlugs.com and Summit Racing) and says "Niterra North America, Inc. does not sell NGK or NTK products directly through Amazon, eBay, or any other online marketplace. Products purchased from third-party sellers on these platforms are not covered under Niterra's warranty program." It adds that it cannot verify the authenticity, storage or handling of products sold by marketplace sellers. ⚪ Champion's warranty says it does not apply to purchases through unauthorized retailers, including unauthorized online sellers, and that DRiV, Champion's warrantor, has no way to confirm the authenticity and quality of products sold through unauthorized resellers. ⚪ Denso's US warranty statement says it does not sell directly online or to service shops or consumers, and offers its products through wholesale distributors, their dealers and national automotive parts retailers. ⚪ ACDelco's page says parts that appear unusually inexpensive, arrive in unfamiliar packaging or lack GM or ACDelco branding may be counterfeit. ⚪

The counterfeit warnings we could read for NGK and Denso are European. Niterra's European pages say its technical service had become aware of fake CR9EIX plugs that caused engine damage due to melted center electrodes; a later Niterra feature says to buy only from authorized channels, to beware of unusually low prices on e-commerce sites, and that a plug with no lot number or a different font on the hexagon is a fake. ⚪ Denso Europe says to buy from an authorized distributor, that checking a plug against the official specifications in the catalog is a simple and effective method, and that it does not accept claims for products bought outside its recognized sales channels. ⚪ We read no US counterfeit page from Bosch, Champion, Autolite or Motorcraft, so a missing statement is a missing statement.

One independent report gives a feel for the problem and nothing more. The Drive reported a test by the YouTube channel Torque Test Channel, which bought a batch of iridium plugs from NGK, Champion and Denso from RockAuto, Amazon and eBay and found that about one third were fakes; only the RockAuto plugs appeared genuine across the board, and plugs bought from one seller (Sixity Auto Parts) on Amazon and eBay also appeared genuine. The report printed no date and no count of plugs tested, and it is a secondhand account of a video, so we use it only as a reason to read the seller line, not as a rate. NGK's list of authorized retailers includes one named Sixity Auto, possibly the same seller; even so, NGK and Champion say marketplace purchases are not covered.

Niterra's and Denso's European pages both say to check the part against a genuine one or against the catalog. Our advice: buy from a retailer on the maker's own list, keep the receipt (Champion's and Autolite's claims require dated proof of purchase), check the part number on the box against the number you wrote down from the manual or dealer, and do not buy from a listing whose price is far below the others for the same part number.

Does a non-genuine plug void the car's warranty?

It is the question owners ask before buying any brand other than the original, and it is a separate question from which plug fits. Federal text answers the first part, and the vehicle makers' own booklets agree with it.

🟢 Statute: 15 U.S.C. 2302(c) says "No warrantor of a consumer product may condition his written or implied warranty of such product on the consumer's using, in connection with such product, any article or service (other than article or service provided without charge under the terms of the warranty) which is identified by brand, trade, or corporate name", except where the Commission grants a waiver. 🟢 The rule at 16 CFR 700.10(c) says no warrantor may condition the continued validity of a warranty on the use of only authorized replacement parts for non-warranty service and maintenance, and adds that this does not preclude a warrantor from denying liability where it can demonstrate that the defect or damage was caused by an unauthorized article or service. 🟢 The Clean Air Act's emission provision, 42 U.S.C. 7541, names spark plugs among the items the owner pays to replace and maintain at a service establishment of the owner's choosing, and says the emission warranty is not invalid on the basis of a certified part used in maintenance. 🟢 EPA's leaflet on emissions warranties says "No. A manufacturer cannot require the use of any specific brand of parts in the maintenance of your vehicle. However, the manufacturer can require you to use parts that are of equal quality to the original parts." and that scheduled maintenance may be performed by anyone who has the knowledge and ability, according to the manufacturer's instructions. 🟢 The leaflet is a 2009 document revised in 2012, on an archived EPA address.

Two car makers print the same position. Hyundai's 2023 handbook recommends Hyundai Genuine Parts and says in capitals that the owner may elect to use non-genuine parts, adding that the use of replacement parts that are not equivalent may impair the effectiveness of the emission control system. ⚪ Subaru's booklets recommend Genuine Subaru Replacement Parts, say that without invalidating the warranty you may elect to have the work done at any establishment and to use other parts (certified parts, in California), and say that the cost of that service or those parts will not be covered under the emission warranty. ⚪ We could not read the FTC's own consumer page (it answered 404 to our requests), so we quote only the statute and the rule, and Autolite's FAQ cites the same law. The reading that follows from all of it, our reading and not legal advice: a plug brand by itself does not void a car warranty, but a part that is not equivalent, or an installation error, can leave you with the repair bill if it caused the damage.

Fitting the plug: who does it, what the makers print, and where this page stops

This page is not an installation guide. Toyota and Nissan point to a technician or dealer, and Autolite's pages say replacing plugs can be a simple job if you take things one step at a time. Toyota's guides say "A qualified technician should perform this operation." Nissan's manuals say that if replacement is required it is recommended you visit a NISSAN dealer. Hyundai's 2023 Tucson manual says "Do not remove spark plugs from the vehicle when the engine is hot." ⚪ NGK says you "should only remove and install spark plugs in a cool engine, because metal expands when hot and thread damage can happen", that the plug holes must be clean, and that over-torquing can stretch the shell and under-torquing can cause overheating and pre-ignition. ⚪

On torque, two plug makers print numbers and the manual wins. NGK's table gives 18.0 to 21.6 lb-ft for a 14 mm flat-seat plug in an aluminum cylinder head and says to always follow the manufacturer-recommended torque specification. Denso's table gives 20 to 30 N-m (15 to 22 lb-ft) for the same size and head. ⚪ The two tables differ, neither is a vehicle instruction, and the number in your manual or from your technician is the one to use. NGK's page also says its plugs are installed at the factory dry, without lubrication or anti-seize, that anti-seize can alter torque values by up to 20 percent, and "Do not use anti-seize or lubricant on NGK spark plugs." Denso says its torque values apply to new plugs without lubricated threads, and that if the threads are lubricated the value should be reduced by approximately one third. ⚪ Those are two different instructions about the same habit. For the same reason the thread and seat details in the plug number matter: Champion's code guide lists the thread, reach, seat (gasket or taper) and hex for each of its shell codes, and a plug with the wrong reach or seat is not a plug that fits.

What a new plug cannot fix

Replacing plugs is the right answer to a plug problem and the wrong answer to several look-alikes. Autolite's page on bad plugs lists six signs, engine misfires, the check engine light, rough idling, trouble starting, lack of acceleration and poor fuel economy, and adds "Not all these symptoms mean it's definitely the spark plugs." Its other culprits to rule out are ignition coils, the fuel system and engine sensors. ⚪ Denso says that continuing to use a plug with worn electrodes puts stress on the ignition coil and can shorten its life. ⚪ NGK's list of causes of misfires includes carbon fouling, worn ignition components, too large a gap, damaged plugs and insufficient coil voltage. ⚪

The risk of ignoring a misfire is printed by several documents. EPA's leaflet says "failure to replace the spark plugs at the intervals specified in the maintenance schedule can lead to misfiring and eventual damage to your catalytic converter". 🟢 Nissan's Altima manual says "Do not keep driving if the engine misfires, or if noticeable loss of performance or other unusual operating conditions are detected." and, for a blinking malfunction indicator, not to drive above 45 mph and to avoid hard acceleration and steep grades. A flashing check engine light means an active misfire: pull over safely, switch the engine off and have the car towed; the only exception, a flashing light alone on a car that starts and runs normally, is a shop within 2-3 miles, reached gently, under 40 mph with light throttle; never for a car that will not start. Where your own manual says not to keep driving with a misfire, as Nissan's catalyst note does, follow it. Nissan's text for a blinking light is more permissive than the rule above (it says not to drive above 45 mph, and that the car need not be towed to the dealer once the light has gone steady); the rule above is stricter, and where they differ, follow the stricter one.

If the symptom is the problem, not the plug interval, the pages to read are our guides to the P0300 random misfire code, to a car running rough, and to a flashing check engine light with shaking. What a misfire can do to the converter is priced in our catalytic converter replacement cost guide. Whether the plugs are due at all is the subject of when to replace spark plugs.

Independent tests and the best brand: why this page ranks none

We found no independent spark plug test we could read, date and check, so none is quoted. The one report we did read (The Drive, above) is about fakes, not about which brand performs best. NGK describes itself as the largest supplier and says its plugs come standard on more vehicles in North America than any other manufacturer, and Champion calls itself the fastest-growing OE supplier of spark plugs; ⚪ both are the makers' own descriptions, and neither can be turned into a ranking for your engine. Only a Toyota page (Denso), Subaru's manual (NGK) and Chevrolet's parts table (ACDelco) name a plug maker beside a part number, so for other cars we cannot say whose plug left the factory. A page that names the best brand without a test on your engine has nothing to stand on.

The traps: three ways a spark plug purchase goes wrong

Trap one: buying the line and not the part. A box that says iridium, long life or OE-style describes a material or a claim; the part number is what has to match. Mazda's CX-5, CX-30 and CX-50 manuals print different codes for different engines, Nissan's table prints a different code and gap for the turbo, and NGK says one part number may fit hundreds of engines. Our advice: check the number, the heat range and the gap against your manual before the brand.

Trap two: changing the heat range, or the gap, to chase a symptom. NGK's text says that a hotter plug used to cover a fuel or oil problem reduces the pre-ignition safety margin and that it is better to correct the mechanical or tuning issue; Chevrolet says re-gapping is not recommended and Nissan says not to re-gap its iridium-tipped plugs; Denso says never to use a round gapping tool on its Iridium Power plug. A symptom that a plug swap seems to hide is a reason to have the engine checked.

Trap three: the cheapest listing. NGK and Champion say marketplace purchases are not covered, Denso refers claims to the seller, and the counterfeit pages we read say an unusually low price is a warning. Our reading: a set saved at the counter can cost more than the difference if the plug fails or is refused under warranty, and if a bad plug damages a coil or converter the repair may not be refunded under the plug's warranty.

Three typical situations

These are composite scenarios, not individual customers; each is built from facts printed on this page and uses no mileage or price of our own.

An owner whose new plug's gap differs from the manual. They ordered a set because the finder returned a part for their model, and the gap in their manual's specification table differs from the plug's preset. NGK says to check the gap against the manufacturer's specifications; Chevrolet says re-gapping is not recommended and Nissan says not to re-gap its iridium-tipped plugs. So they first check the part number against the manual or a dealer: wrong part, they return it; right part and the manual forbids re-gapping, a technician decides. They never accept a model-name match without the engine.

An owner with a rough idle who wants hotter plugs. Their manual says only to install the correct heat range. NGK says that hotter plugs used to cover a fuel delivery or oil consumption problem reduce the pre-ignition safety margin, and Autolite's list says the same signs can come from coils, the fuel system or sensors. So they have the car checked before buying anything, and if the check engine light is flashing they follow the flashing-light rule above.

A buyer who finds a premium plug far below the usual price. The listing is on a marketplace, and the seller is not on the maker's list. NGK says marketplace purchases are not covered by its warranty, Champion's warranty excludes unauthorized sellers, and a European Niterra page says a plug with no lot number or a different font on the hexagon is a fake. They buy from a retailer on the maker's list, and keep the receipt for the warranty claim.

What this page cannot tell you

We did not test any plug, and we found no independent test we could read, so nothing here says that one line performs better than another. No plug maker's page we read printed a plug price with a date, so there is no price, no cost comparison and no claim that one brand is cheaper. The life figures and the material comparison are in the iridium versus platinum comparison, not here.

The manuals and maintenance guides we read are for specific model years and engines: Toyota's six guides (2022 to 2025) and one specification page, the 2023 Nissan Altima and Rogue, the 2025 Infiniti QX60, the 2023 Chevrolet Equinox, Hyundai's 2023 Elantra, Tucson and Tucson Hybrid manuals and 2023 handbook, a Canadian 2023 Kia edition, four Mazda manuals (2024 files), a Subaru owner's manual and Subaru's 2023 and 2024 booklets. Yours may differ, and the printed codes and gaps above are shown to explain how the match works, not as recommendations for your car. We could not read Ford's manuals or Motorcraft's pages (403), Honda's current manual pages (503), a Volkswagen or Mercedes plug type (their 2024 booklets name none), or BMW, Volvo and Kia US manuals, and Toyota specification pages other than the one above were not found, so those makers are missing, not assumed. NGK's counterfeit pages for US buyers answered with an error, its spec-sheet files were unreadable, Bosch's guarantee terms were not on the page we read, and the FTC's consumer pages answered 404. We read no US counterfeit page from Bosch, Champion, Autolite or Motorcraft.

We ran no part finder for your car, and a finder is only as good as its data. The plug makers' statements about their own products are claims. The federal text is quoted as printed; how it applies to your car and your warranty is a question for the car maker, a shop or a lawyer, and nothing here is legal advice.

How do I use this page if I only want to know what to buy, and does PulsCar gain from the answer? PulsCar publishes this guide and sells no spark plugs, no plug brand pays us, and no link here is an affiliate link. The shortest use of the page is this: the plug for your car is the one your own owner's manual or maintenance guide specifies for your engine; where the manual prints no part number, ask a dealer or use the maker's parts site, and do not take a plug type from a brand's box or a marketplace listing. Run a plug maker's part finder, compare the part number, the heat range and the gap with the manual, and buy from a retailer the plug maker names, keeping the receipt, because NGK and Champion say marketplace purchases are not covered by their warranties. We did not test any plug and rank none.

Your action plan: before you shop, at the checkout, after the fit

Before you shop. Find your engine's plug in the manual: the part code where it is printed, or the rule it prints (same type as originally equipped, recommended or equivalent, correct heat range), and the gap in the specification pages if there is one. The plug for your car is the one your own owner's manual or maintenance guide specifies for your engine; where the manual prints no part number, ask a dealer or use the maker's parts site, and do not take a plug type from a brand's box or a marketplace listing. Write down the engine, not just the model. If your plugs are not yet due, the interval question is in our guide to when to replace spark plugs.

At the checkout. Run the plug maker's part finder and compare its part number with what you wrote down. Check the heat range number against the maker's own direction (NGK lower is hotter, Champion higher is hotter). Compare the guarantee and its conditions, and note that a longer guarantee still follows the car maker's interval. Buy from a retailer on the plug maker's list, not from a listing priced far below the rest, and keep the dated receipt.

After the fit. Have the engine cool before plugs come out. Follow your manual's torque and the plug maker's lubrication rule (NGK says no anti-seize on its plugs). Do not clean or re-gap an iridium-tipped plug if your manual says so (Nissan says both; one Toyota page says not to adjust the gap). If the engine runs rough, a light stays on or the light flashes, the plugs are one suspect among several: follow the flashing-light rule on this page, and see the guides above on the P0300 code and a car running rough. If the car is under a manufacturer warranty, keep the receipt and the part number with your service records.

What should I do if the plug I bought does not match my manual? Do not install it. Return it with the dated receipt (our advice); Autolite's and Champion's warranty texts require dated proof of purchase, and they and ACDelco's exclude installations on the wrong application. PulsCar publishes this guide and sells no spark plugs; every claim here comes from the vehicle makers', plug makers' and federal documents listed in the sources, each read on 15 November 2026, and where the documents disagree, as on gap gauges or on heat-range advice, we show both. Advice that no source prints is labelled as ours. If a check engine light is flashing, the plug is not the first question: follow the flashing-light rule in this guide and have the car checked before anything else.

Sources and documents

Every address below returned a page when we checked it on 15 November 2026; where we could not read a document, the section above says so. Marks: ⚪ maker's own page, 🟢 statute or government text.

Prices verified 15 November 2026: no plug maker's page we read printed a plug price with a date, so none is quoted; The Drive's report printed a retail price with no date and we do not use it.

Technical documents verified 15 November 2026: the vehicle-maker and plug-maker documents above were read as text on that date, each quotation checked against the saved copy, and the pages we could not read are listed in the section on what this page cannot tell you.