💡 The answer in 60 seconds

There is no single best synthetic oil; there is the oil your manual names, and a few printed marks that show a bottle meets it. Match three things from your manual: the viscosity grade, the specification (an API or ILSAC mark, a GM dexos1 licence, an ACEA code, or a maker code such as Ford WSS or Mercedes-Benz 229) and any brand or approval it names. API's own guide says the latest gasoline category includes each earlier one, so an API SQ and ILSAC GF-7A oil covers a manual that names SP and GF-6A (GF-7B is only for 0W-16 oils); GM says a licensed dexos oil carries the dexos icon on the front label and an 11-digit licence number on the back label. Then compare what is printed: the approvals each brand lists, the interval it promises (Mobil and Castrol print 25,000 miles or one year, Pennzoil 15,000 miles, with conditions) and the footnotes behind each percentage. The one independent test we found, AAA's 2017 report, compared synthetic with conventional oil, not brand with brand. We did not test any oil. If several bottles carry every mark your manual names, the sources give no further basis to choose, and price and availability are yours to weigh (our advice). This page is about gasoline-engine oils; for a diesel, follow your maker's performance levels. A maintenance reminder is not a warning light. If the red oil pressure light comes on while you drive, stop in a safe place and switch the engine off: Mazda, Nissan, Infiniti and Subaru print a warning against running the engine with that light on, and Nissan, Infiniti and Subaru say to contact a dealer. Our advice, not a maker's: once it is safe, wait as your manual says, then check the oil level; if it is low, add oil as your manual says, and if the level was not low, or the light stays on after adding oil or returns, do not drive on and have the car towed. PulsCar sells no oil and no oil brand pays us; there is no affiliate link on this page.

This guide is a way to choose, built from what the owners of the standards, car makers and oil brands print, and it says plainly where the evidence stops. We read the pages on 15 and 16 November 2026, and the manuals and pages marked in the Sources list on 11 November 2026. 🟢 Standard or licence owner marks text from API, ACEA, General Motors' dexos pages or the EPA; ⚪ Brand's claim marks an oil brand's statement about its own product, which is a claim and not proof. Brands in the shortlist are listed alphabetically, not ranked. Prices appear only where a page printed one, with its date.

Which synthetic oil should I buy, and what does PulsCar have to do with the choice? Nothing: PulsCar publishes this guide, sells no oil and takes no payment from any oil brand. The useful order is the one the sources give. First your manual's viscosity grade, specification and approvals; our guide on what oil your car takes shows how to find them. Then the marks and licences that show a bottle meets them, which are the standard owners' own (API's and GM's can be checked against their lists; ACEA classes are self-certified). Only then the differences between brands, which are claims with footnotes. Where an interval or a price question comes up, how often to change oil and the oil change cost guide carry the details and this page does not repeat them.

Start with what your manual prints: grade, specification, approval

A manual answers three separate questions, and a shelf label answers each in a different place. The viscosity grade is the SAE number, such as 0W-20. The specification is a standard's mark: API's, ILSAC's, or ACEA's. The approval is a car maker's own: General Motors' dexos1, Mercedes-Benz's sheet number, Ford's WSS code, Chrysler's MS code or BMW's Longlife name. Some manuals name one of them, some name all three, and some name a brand.

The oil brands say the same thing. Mobil's page for its Extended Performance 0W-20 oil closes its applications list with "Always check your owner's manual for the manufacturer's recommended oil viscosity grade, API service classification and any builder approval." ⚪ Pennzoil's specification table for its Platinum oil ends with "Please refer to your individual vehicle owner's manual for proper viscosity grade and specification of oil to use." ⚪ API's own Motor Oil Guide, the standard owner's publication, says of viscosity: "Follow your vehicle manufacturer’s recommendations on SAE oil viscosity." 🟢 And on performance levels, the heading of its charts says to follow your vehicle manufacturer's recommendations. The two brands' and the standard owner's instructions agree: the manual comes first, and this page cannot know your engine.

The viscosity grade is a topic of its own: how to find yours is in our guide on what oil your car takes, and what the numbers mean is in our oil viscosity chart guide. Here the question is the other two, because they are what a shopper can check on the container. An API mark can be checked against API's licensee directory and a dexos licence against GM's list, API says it tests oils in the marketplace, and ACEA classes are self-certified by the marketer; a later section gives the words. The next sections take the marks in the order a manual is likely to name them.

What "synthetic" means on a label: the standard owners do not say

The word synthetic is not defined in the two API documents we read. We searched the full text of API's licensing standard, API 1509, 23rd edition, February 2025, and API's Motor Oil Guide for the word, and found it in neither. 🟢 What API 1509 defines is base stocks, in five groups. Group III is described as "Group III base stocks contain greater than or equal to 90 percent saturates and less than or equal to 0.03 percent sulfur and have a viscosity index greater than or equal to 120", and "Group IV base stocks are polyalphaolefins (PAO)." Group V is "all other base stocks not included in Group I, II, III, or IV." 🟢 A label may call an oil synthetic on the strength of those groups or of another definition, but the standard that licenses the donut does not print the rule.

Castrol, an oil company, says so about blends. Its page on conventional, semi and full synthetic oils says: "There is no definition of how much synthetic needs to be included in a semi or part synthetic motor oil." ⚪ For a full synthetic, the same page says that 100% of the base oil composition contains the synthesized components. ⚪ Castrol's page on synthetic oil adds a recommendation of its own: "This is why every engine will benefit from a full synthetic motor oil whether required through the manufacturer’s specification or not." ⚪ It adds, in the same article, "unless extended service has been demonstrated and claimed, Castrol advises that motorists always follow the manufacturers’ recommendations for oil specification and grade as well as oil change interval." ⚪ Both are the brand's words about its own category.

What a shopper can rely on is narrower. If your manual says full synthetic, as General Motors' 2026 Chevrolet Silverado manual does ("Use full synthetic engine oils that meet the dexos1 specification."), or, as Subaru's manual MSA5M2403A does, says "Always use the SUBARU approved engine oil." and, in its table of alternative oil for when that oil is unavailable, calls synthetic the required oil ("0W-20 synthetic oil is the required oil for optimum engine performance and protection.", and in the same cell "Conventional oil may be used if synthetic oil is unavailable."), the bottle should say that as well as carry the mark; the manual's own fallback sentences are the only permission to depart from it (our reading). A footnote in that table says that if 0W-20 synthetic oil is not available, 5W-30 conventional oil may be used if you need to add oil, to be changed to 0W-20 synthetic at the next oil change. If your manual names a specification and a viscosity only, the mark and grade are what you match, and whether the oil is called full synthetic, a blend or conventional is a question your manual has not asked. Our guide on synthetic versus conventional oil covers switching, mixing and blends in detail.

API and ILSAC: the marks on the bottle, and what changed in 2025

Everything here is about gasoline engines; API's guide says its C (commercial) diesel categories "may not provide all of the performance requirements consistent with vehicle manufacturers’ recommendations for gasoline fueled engines." 🟢 Two marks sit on many American passenger-car oils. API's Service Symbol, the donut, carries the API Service Category: SQ, SP, SN and earlier letters for gasoline engines, with a viscosity grade and sometimes the words Resource Conserving. The Starburst and the Shield are API's marks for oils that meet an ILSAC standard. API's Motor Oil Guide says of the Starburst: "An oil displaying this mark meets the current ILSAC GF-7A engine protection standard and fuel economy requirements of the International Lubricant Specification Advisory Committee (ILSAC), a joint effort of U.S. and Japanese automobile manufacturers." The Shield is for GF-7B and "can only be applied to oils having a viscosity grade of 0W16." 🟢

The newest letters are recent. The Motor Oil Guide we read, dated 21 April 2025 in its footer, lists ILSAC GF-7A and GF-7B as current, "Introduced in March 2025, designed to provide protection against both fresh and aged oil low-speed pre-ignition (LSPI)", with improved timing chain wear protection, high-temperature deposit protection and fuel economy, among other things. API Service SQ is listed the same way, and the guide says "API SQ with Resource Conserving matches ILSAC GF-7A by combining API SQ performance with improved fuel economy, enhanced emission control system protection, enhanced low temperature pumpability and protection of engines operating on ethanol-containing fuels up to E85." 🟢 API's licensing standard, API 1509, 23rd edition, lists the GF-7A and GF-7B standards as "Effective March 31, 2025" in its table of contents. 🟢

The older categories do not disappear from a manual. The same guide's gasoline chart reads, for SP, "For 2025 and older automotive engines.", and for SN, "For 2020 and older automotive engines." 🟢 Its ILSAC chart marks GF-6A and GF-6B as current with a footnote, "Obsolete on October 1, 2026". 🟢 On the day we read the page that date had passed, so by API's own schedule GF-6 is no longer current. Chevron's Havoline page said GF-6/API SP oils would be "available for up to one year after the first license date", ⚪ which the shelf may or may not still show. API's ILSAC chart says, in the older rows, "Use GF-7A where GF-6A is recommended." and "Use GF-7B where GF-6B is recommended." 🟢

One more detail matters if the oil is heavier. Phillips 66's Kendall one-pager says: "Heavier grades like 10W-40 and 20W-50 meet API SQ requirements but do not qualify for ILSAC certification and will not carry a starburst or shield." ⚪ Our reading: a manual that calls for a Starburst on a 0W-20 oil is not satisfied by a 10W-40 oil with only the donut, whatever the grade does elsewhere. Havoline's page adds that GF-7 stops above the thinnest grades: "Lower viscosity grades like 0W-12 and 0W-8 are not covered under GF-7." ⚪

API's own web pages and its guide do not carry the same date, and a shopper should know. The category page on api.org that we read on 15 November 2026 still lists API SP as current and ILSAC GF-6A and GF-6B as current, and does not mention SQ or GF-7; its companion page on the latest oil categories still describes the 2020 launch of GF-6A, GF-6B and SP. 🟢 The Motor Oil Guide PDF on the same site, and API 1509, carry the 2025 standards. Brands print the 2025 date too: Chevron's Havoline page says "ILSAC GF-7 is the latest engine oil specification developed by ILSAC (International Lubricants Standardization and Approval Committee) as the new standard, replacing GF-6A and GF-6B." ⚪ and Royal Purple's page says "First License in market is March 31, 2025". ⚪ We treat the guide and the standard as current and the web page as not yet updated; we could not ask API.

At the shelf, a bottle that says GF-7A and API SQ meets the newest standard and, by API's own sentence quoted above, can be used where an older gasoline category is named. A bottle that says GF-6A and API SP is the previous standard; API's guide footnotes GF-6A and GF-6B as obsolete on 1 October 2026, a status label in its chart, while SP is still listed as current. Neither changes what your manual names.

GM's dexos1 Gen 3: a licence anyone can look up

If your manual is a General Motors one, the specification is probably dexos, and this is a licence with a public look-up list (API publishes a licensee directory too). GM's own pages say how it works. "Only licensed dexos® products have been certified by GM to meet the dexos® specification." 🟢 The page continues that unlicensed products "have not gone through GM's rigorous testing process, are not monitored for quality, and are not approved or recommended for use in GM vehicles", and that using them "may result in lower levels of performance and could cause engine damage that may not be covered under warranty." 🟢 How to tell: "Simply look for the dexos® icon on the front label and the 11 digit alphanumeric dexos® license number on the back label." 🟢 The Silverado manual says the same thing from the car's side, in words that matter for a shopper: "Engine oils that have been approved by GM as meeting the dexos1 specification are marked with the dexos1 approved logo."

The list is long. To confirm a bottle, our advice is to search its licence number on the list. The page of licensed dexos1 Gen 3 brands that we read on 15 November 2026 had 1,634 rows, each a brand name, supplier, viscosity and licence number, and 849 of them were SAE 5W-30, 707 SAE 0W-20, 71 SAE 5W-20 and 7 SAE 0W-30. 🟢 The page opens with a compatibility note: "GM dexos 1 Gen 3 engine oils exceed the performance of GM dexos 1 Gen 2 engine oils and are backward compatible, therefore vehicles that previously used GM dexos 1 or GM dexos 1 Gen 2 will use a GM dexos 1 Gen 3 or GM dexos R licensed engine oil of the appropriate viscosity grade at their next oil change." 🟢

What the list shows is useful. The brands on this page's shortlist that have Gen 3 rows are Castrol (rows named Castrol EDGE, including EDGE Extended Performance in 0W-20, 5W-20 and 5W-30), Havoline (ProDS full synthetic, ProDS Lifelong and SynBlend DX), Kendall (GT-1 Full Synthetic in 0W-20 and 5W-30), Mobil (rows named Mobil 1 Extended Performance in 0W-20 and 5W-30, and four named Mobil 1 Extended Performance High Mileage), Pennzoil (Platinum Full Synthetic in 0W-20, 5W-20, 5W-30 and a 0W-30 row), Royal Purple (High Performance in 0W-20 and 5W-30), and Valvoline (including Extended Protection Full Synthetic MaxLife). 🟢 We searched the same text for Amsoil, Red Line and Redline and found no row for any of them.

That last result needs careful wording, because Red Line's page for its Professional-Series 5W-30 says "Approved for dexos1™, Gen 2, Gen 3, can be used in all new GM vehicles", ⚪ and its data table lists "dexos1™, Gen 2, Gen 3" under "Approved For:". ⚪ The page does not print a licence number, the GM Gen 3 list we read has no Red Line row, and we cannot say why. There are several possible reasons and we do not know which applies; we did not ask Red Line or GM, and we did not read GM's Gen 2 list. The practical reading is GM's own: look for the icon and the 11-digit alphanumeric licence number on the container. Our advice, if you want to confirm, is to search that number on the list.

Two more things from the list. The Mobil Extended Performance 0W-20 page we read marks Gen 3 in the 5W-30 column only, while the GM list has a Mobil 1 Extended Performance row in 0W-20: the licence list and a brand's page can differ by grade, and the list is the licence owner's text. And the list is not a list of full synthetics: it has at least eight rows whose product names say blend, six for Pennzoil Gold Synthetic Blend and two for Havoline SynBlend DX Motor Oil. 🟢 Havoline's own page says its SynBlend DX is a "synthetic blend motor oil, with GM dexos1™ Gen 3 certification" and "offers protection up to 5,000 miles", ⚪ with a footnote that tells you to maintain the oil change intervals recommended in your owner's manual if the vehicle is under warranty. A dexos licence says an oil met GM's specification; our reading is that it is not a statement about base oil, and whether the car needs a full synthetic is the manual's sentence, which for the 2026 Silverado says full synthetic.

ACEA and European codes: when the manual names a letter and a number

ACEA is the European carmakers' association, and its oil sequences are the other standard a manual may name, usually for European engines. The mark looks like A3/B4, C2, C3 or C5, with a year. The first fact a shopper should know is that ACEA's text describes the sequences as self-certified. The general requirements say "The ACEA Oil Sequences define the minimum quality level of an oil product for selfcertification to the European Engine Lubricants Quality Management System (EELQMS) and for presentation to ACEA members." 🟢 That is not API's model of a licence with marketplace sampling, and not GM's list: a marketer states the claim. ACEA's text adds two rules for the claim. "Where claims are made that oil performance meets the requirements of the ACEA Oil Sequences (eg product literature, packaging, labels) they must specify the ACEA Class and Category", and "The supplier of any oil claiming ACEA performance requirements is responsible for all aspects of product liability." 🟢

Which engine takes which letter is left to the maker. "Specific applications of each sequence are the responsibility of individual engine manufacturers for their own vehicles / engines." 🟢 And: "Oils within a category may also meet the requirements of another category, but some engines may only be suited to oils of one category within a class." 🟢 ACEA's consumer language, in its 2021 light-duty document, describes the categories this way: A3/B4 is a "Stable, stay-in-grade engine oil intended for use at extended oil drain intervals in passenger car and light-duty gasoline and DI diesel engines", C2 is a mid-SAPS oil for engines "designed for low-viscosity engine oils with a minimum HTHS viscosity of 2.9 mPa⋅s", and C3 is a mid-SAPS oil for engines designed for a minimum HTHS viscosity of 3.5. 🟢 C5 is for engines designed and OEM-approved for oils with an HTHS viscosity of at least 2.6 mPa⋅s. The document warns that the low-viscosity A5/B5 and A7/B7 oils "are unsuitable for use in certain engines - consult manufacturers’ owner manual/handbook in case of doubt." 🟢 The ACEA text also says that when a new edition is introduced, "oils with claims against the previous issue can be marketed for another two years only", and that A3/B3 "Category withdrawn with these ACEA Oil Sequences." 🟢 A shopper can use that: the year on a code, and whether the category still exists, are worth a look.

Mercedes-Benz and MINI show how a manual names the code instead of the mark. The 2022 Mercedes-Benz C-Class manual says approved operating fluids carry the inscription "MB-Freigabe (e.g. MB-Freigabe 229.51)" or "MB-Approval (e.g. MB-Approval 229.51)", and its engine oil table for gasoline engines lists the sheets 229.71, marked as recommended for the lowest possible fuel consumption, and 229.72, with "Gasoline engines: Only use SAE 0W-20 viscosity class engine oils." It prints a warranty consequence in the same chapter: "Only use products approved by Mercedes-Benz. Damage caused by the use of products that have not been approved is not covered by the Mercedes-Benz warranty or goodwill gestures." A 2025 MINI Countryman manual names "BMW Longlife-17 FE+." as the oil specification for topping up a gasoline engine and lists "API SL.", "API SM." and "API SN." as alternative engine oil types, with a limit: "If an engine oil suitable for continuous use is not available, up to 1 US quart/liter of an engine oil with the following oil rating can be added".

The brands print ACEA codes too. Castrol's EDGE Extended Performance page lists ACEA C5 for its 0W-20 and 5W-20 grades, "ACEA A5/B5, C2" for its 5W-30, and "MB-Approval 229.71" for the 0W-20. ⚪ Red Line's 5W-30 page, which lists A3/B3 although ACEA says that category was withdrawn, says its oil is "Recommended for API SN/SM/SL/SJ/SH/SG/CF and ACEA A3/B3/B4, GM dexos1® (GM-LL-A-025, GM6094M and GM4718M) and BMW LL-01", with no edition year printed beside the ACEA codes. ⚪ We do not say what that means for any car. A match of letters is the thing to compare: a bottle's ACEA code against the code in the manual, and the edition against ACEA's own list.

Ford, Chrysler and the other maker codes: four words for four different things

Ford, Ram and other makers print their own codes, and the brands list them in several tiers that are easy to read as one. The cleanest example is Mobil's page. It has three separate tables: "This product has the following approvals:", "This product is recommended for use in applications requiring:" and "This product meets or exceeds the requirements of:". ⚪ On the 0W-20 page we read, the first table lists GM dexos1 Gen3 for the 5W-30 grade only, the second lists maker codes such as Ford WSS-M2C947-A and Chrysler MS-13340 by grade, and the third lists API SQ Resource Conserving and ILSAC GF-7A. Royal Purple's data sheet makes the distinction in a legend: "X - Formally licensed / registered" and "● - Recommended for use / meets requirements". ⚪ On that sheet the 0W-20 grade has an X for API SQ Resource Conserving, ILSAC GF-7A and dexos1 Gen 3, and a dot for Chrysler MS-6395 and Ford WSS-M2C972-A1. ⚪

Castrol's page uses a third phrasing: "Meets engine test requirements of Chrysler MS 6395", "Meets Ford WSS-M2C961-A1", but "GM dexos1™ Gen 3" plain, matching the licence. ⚪ Valvoline's page for its Advanced Protection 5W-30 says "Meets the requirements of: ILSAC GF-7A, API SQ, API SP, API SN with SN PLUS, Resource Conserving and all preceding API and ILSAC gasoline categories. Additional Specifications: Ford WSS-M2C961-A1, Chrysler MS-13340, GM dexos 1 Gen 3". ⚪ The words are approved, licensed or registered, recommended for use, meets requirements and meets engine test requirements. They are not interchangeable, and none of them is a statement about your car.

Car makers say how they treat codes. Ford's page says "Ford recommends a specific Motorcraft® engine oil type that varies by your vehicle's model year, model, and engine type." and points to the owner's manual, a parts lookup by year, make and model or VIN, or a quick-reference chart. Ram's 2026 manual names its own oil for one engine ("We recommend using Mopar® SAE 0W-20 Full Synthetic Engine Oil, which meets the requirements of the manufacturer Material Standard MS-6395."), then sets the rule for any other oil: "Equivalent full synthetic SAE 0W-20 engine oil can be used but must have the API Starburst trademark with a certification level of API-SP or later. API-SN+ is also acceptable." and "Usage of earlier API certification levels (such as API-SN or prior) can result in engine damage and is not covered by the New Vehicle Limited Warranty." For another engine in the same manual, it names a 0W-40 oil with a different material standard.

What the manuals name, maker by maker

Here is the same question in the words of makers we read, this time looking only at how each names the specification and what it prints about a wrong one. Each row is one document for one engine or one page; none is a lookup for your car.

Toyota, RAV4 Hybrid manual OM0R074U (the page's metadata says the 2020 model year). "Oil grade: API SN/RC multigrade engine oil", with Toyota approved Toyota Genuine Motor Oil "or equivalent to satisfy the following grade and viscosity."
API grade plus genuine or equivalent
General Motors, 2026 Chevrolet Silverado. "Use full synthetic engine oils that meet the dexos1 specification." and "Failure to use the recommended engine oil or equivalent can result in engine damage not covered by the vehicle warranty."
dexos1, full synthetic
Ford, owner site page. "Ford recommends a specific Motorcraft® engine oil type that varies by your vehicle's model year, model, and engine type."
brand and type by engine
Hyundai, 2023 Tucson, and Kia, SK3 2024 page. Kia: "Full synthetic SAE 0W-20, API SN PLUS/SP or ILSAC GF-6". Hyundai: "Requires API SN PLUS (or above) Full synthetic grade engine oil."
API SN PLUS or SP, full synthetic
Nissan, 2025 Altima. "Genuine “NISSAN Motor Oil 0W-20 SP” (or equivalent) is recommended." and "Damage caused by the use of motor oil (or engine oil) other than as recommended is not covered under NISSAN’s New Vehicle Limited Warranty."
genuine or equivalent
Mazda, 2025 CX-50 (SKYACTIV-G 2.5). "Only use SAE 0W-20 oil “Certified For Gasoline Engines” by the American Petroleum Institute (API)."
API gasoline mark
Subaru, manual MSA5M2403A. "Always use the SUBARU approved engine oil."; in the alternative-oil table for when that oil is unavailable: "0W-20 synthetic oil is the required oil for optimum engine performance and protection." and "Conventional oil may be used if synthetic oil is unavailable."
approved oil; synthetic as the alternative
Honda, Civic 2023 manual page (third-party copy). "You may also use synthetic motor oil if it is labeled with the API Certification Seal and is the specified viscosity grade."
API seal and grade
Ram, 2026 1500 (a 3.0L engine). "Usage of earlier API certification levels (such as API-SN or prior) can result in engine damage and is not covered by the New Vehicle Limited Warranty."
API-SP or later, SN+ accepted
Mercedes-Benz, 2022 C-Class. "Only use products approved by Mercedes-Benz." and a table of approval sheets, 229.71 and 229.72, with "Gasoline engines: Only use SAE 0W-20 viscosity class engine oils."
approval sheet number
MINI, 2025 Countryman. "BMW Longlife-17 FE+." with alternative engine oil types "API SN." for topping up, up to 1 US quart/liter
BMW Longlife and API

Four things stand out. The same question gets several shapes of answer: an API grade or a genuine oil with an "or equivalent" clause (Toyota, Nissan), a licence (GM), a brand and type by engine (Ford), an API mark with a viscosity (Hyundai, Kia, Mazda, Honda, Ram), and a code or approval sheet to match on the container (Mercedes-Benz, MINI); Subaru names an approved oil and a table of alternatives. Four of the makers print a warranty consequence for the wrong product, in different words: GM, Nissan, Ram and Mercedes-Benz. Several accept a commercial oil if it carries the API mark (Honda, Hyundai, Kia, Mazda and Ram, each with its own condition). And one document, Hyundai's footnote, ties a lower-grade oil to the severe-usage maintenance schedule instead of forbidding it: "If a lower grade engine oil (mineral type, semi-synthetic, lower grade spec, etc.) is used, replace the engine oil and engine oil filter as indicated in maintenance under severe usage conditions." That is the maker's sentence for one table, and our guide on what oil your car takes carries the full eight-maker table with grades and quarts.

Shortlist by situation: what nine brands print about their own oils

This is not a ranking and not a recommendation. It lists what each brand's own page says (alphabetically in the first grid, and in the order of the pages in the paragraphs after it), so that you can compare the words with your manual. Every row is a brand's claim about its own product (⚪) except where a licence list is named (🟢). A brand missing from a situation is missing because the page we read did not print the relevant line, or because GM's list has no row for it, not because the oil lacks it. Grades differ by row, and the page for your grade is the one that counts.

A car whose manual names dexos1 (General Motors). Our advice: check the licence number on the back label first, as GM's about page describes. Most brands below have dexos1 Gen 3 rows on GM's list (Red Line's row: none found), 🟢 and each row also says what the brand's own page prints:

Castrol EDGE and EDGE Extended Performance. EDGE 0W-20 and 5W-30 pages list "GM dexos1™ Gen 3"; EDGE Extended Performance lists it for 0W-20, 5W-20 and 5W-30, matching GM's rows. 🟢 ⚪
GM rows: yes
Havoline ProDS. Chevron's page: "Our SAE 0W-20 and 5W-30 variants are GM dexos1™ Gen 3 licensed." ⚪
GM rows: yes
Kendall GT-1. The one-pager we read lists GT-1 Max, Euro, Euro+ and Endurance, names GF-7A and GF-7B marks and prints "dexos1™ Gen 3" with SAE 0W-20 and 5W-30; GM's list has GT-1 Full Synthetic rows in 0W-20 and 5W-30. 🟢 ⚪
GM rows: yes
Mobil 1 Extended Performance. The 0W-20 page marks dexos1 Gen3 in its 5W-30 column only; GM's list has rows for the product in 0W-20 and 5W-30. 🟢 ⚪
GM rows: yes
Pennzoil Platinum. The specification table we read lists API SQ-RC, ILSAC GF-7A and GF-7B, Chrysler and Ford codes and no dexos row; GM's list has Pennzoil Platinum Full Synthetic rows. 🟢 ⚪
GM rows: yes
Red Line Professional-Series 5W-30. The page says "Approved for dexos1™, Gen 2, Gen 3, can be used in all new GM vehicles", prints no licence number, and its "Approved For" table lists API SP, dexos1 Gen 2 and Gen 3, and ILSAC GF-6; we searched GM's Gen 3 list for Red Line and Redline and found no row. ⚪ 🟢
GM rows: none found
Royal Purple High Performance. Data sheet of 29 April 2025: an X, "Formally licensed / registered", for dexos1 Gen 3 in 0W-20 and 5W-30. ⚪
GM rows: yes
Valvoline Advanced Protection. The 5W-30 shop page lists "GM dexos 1 Gen 3" among additional specifications. ⚪
GM rows: other Valvoline names

A car whose manual names a Ford or Chrysler code. The brands print them in different tiers, as the earlier section showed. Mobil's 0W-20 page lists Ford WSS-M2C947-A and WSS-M2C962-A1 and Fiat Chrysler Automotive MS-6395 under recommended use, and Ford WSS-M2C972-A1 as met. Pennzoil Platinum's table lists Chrysler MS-6395, MS-13340 (5W-30) and Ford WSS-M2C970-A1, 971 and 972 by grade. Valvoline's page lists Ford WSS-M2C961-A1 and Chrysler MS-13340 as additional specifications. Castrol's EDGE pages print "Meets engine test requirements of Chrysler MS 6395". Royal Purple's data sheet puts Chrysler MS-6395 and Ford WSS-M2C972-A1 in the dotted tier, "Recommended for use / meets requirements". ⚪

A European engine whose manual names ACEA or an approval sheet. Castrol's EDGE Extended Performance 0W-20 lists ACEA C5, MB-Approval 229.71 and Fiat 9.55535 codes, and its 5W-30 lists ACEA A5/B5 and C2. Red Line's 5W-30 lists ACEA A3/B3/B4 and BMW LL-01, with no ACEA edition year. Kendall's one-pager names GT-1 Euro and Euro+ lines and prints only API SN for them, with a pointer to a product data sheet that we did not read. We did not read Valvoline's, Mobil's or Pennzoil's European-formula pages. ⚪ What the table cannot say is whether your engine takes any of those codes; the manual does.

A turbocharged direct-injection engine, and the LSPI words. Low-speed pre-ignition is one of the failures the 2025 standards are designed to protect against, and the API guide says GF-7A and SQ are "designed to provide protection against both fresh and aged oil low-speed pre-ignition (LSPI)". 🟢 The brands phrase it as a benefit: AMSOIL's Signature Series page says "Even after 25,000 miles of use, Signature Series delivers 4X more piston protection against LSPI" than the industry standard requires, with a footnote naming its 5W-30 and the Sequence IX aged-oil LSPI test; Royal Purple's sheet says "5X INCREASED PROTECTION AGAINST LOW SPEED PRE-IGNITION (LSPI)" with a comparison basis of "API SQ, ILSAC GF-7 requirements, and/or dexos™1 Gen3"; Havoline's product data sheet, dated 20 May 2019 on the copy we read, says its oil "Protects Gasoline Direct Injection (GDI) engines from low-speed pre-ignition (LSPI)"; Red Line's page says its oil "Helps to prevent low-speed pre-ignition (LSPI) in turbocharged gas direct-injection engines". ⚪ The words are different, the bases of comparison are different, and none states a number for another brand.

A thin grade (0W-16 or thinner) or a hybrid. The SAE 0W-16 grade has its own ILSAC standard, GF-7B and the Shield, 🟢 and Havoline says the standards do not cover 0W-12 or 0W-8 (quoted earlier). Pennzoil's Platinum table lists "ILSAC GF-7B" for 0W-16 and GF-7A for its other grades. Havoline's data sheet, the 2019 copy, says its 0W-16 is "specially formulated for Toyota and Honda gasoline and hybrid engines that are designed to operate on an SAE 0W-16 viscosity motor oil." Castrol prints "Also suitable for hybrids (0W grades)" on its EDGE pages, and its 0W-16 page lists API SQ/SP/SN PLUS/SN and ILSAC GF-7B, while its 0W-8 page lists API SQ/SP/SN PLUS/SN and JASO GLV-1 and no ILSAC line. ⚪ Whether a hybrid's engine takes an oil is, as everywhere, the manual's line.

Interval promises: 25,000, 20,000, 15,000, 10,000 miles, and the sentence beside each

Several brands print a mileage next to their oil. Three of the pages we read also print that the car maker's interval or the oil life sensor or warning lights stand (Havoline, Mobil, Pennzoil), Castrol's explainer page names only the maker's interval, unless extended service is claimed, and the conditions differ. The grid puts the promises and their conditions side by side.

Castrol EDGE Extended Performance. "25,000 miles between oil changes", footnote "Or one year, whichever comes first". ⚪
25,000 mi or 1 year
Castrol EDGE. The page's own introduction says "maintaining protection for up to 20,000 miles"; the 0W-8 and 0W-16 pages print 10,000 miles, and the 0W-20, 5W-20 and 5W-30 pages 20,000 miles, each "Or one year, whichever comes first". ⚪
10,000 or 20,000 by grade
Havoline ProDS. "Guaranteed protection for 10,000 miles, or one year, whichever comes first. If your vehicle is under warranty, maintain oil change intervals recommended in your owner's manual. Follow your vehicle's oil warning lights. Severe service conditions are excluded." ⚪
10,000 mi or 1 year
Havoline SynBlend DX. The same footnote wording for 5,000 miles. ⚪
5,000 mi or 1 year
Mobil 1 Extended Performance. "Protects for 25,000 miles or 1 year, whichever comes first"; the page also says "If your vehicle is covered by a warranty, follow the vehicle's oil life sensor or the oil change interval recommended in your owner's manual." ⚪
25,000 mi or 1 year
Pennzoil Platinum. "Protection for up to 15,000 miles or one year, whichever comes first. Use an oil filter designed for longer oil change intervals and follow OEM manual and vehicle’s oil life sensor to maintain OEM warranty." The same footnote excludes severe driving conditions, says other conditions apply, and requires an engine with fewer than 125,000 miles, made in the past 72 months, and sign-up. ⚪
15,000 mi or 1 year
AMSOIL Signature Series. The page we read prints 25,000 miles as the service interval of a test (the aged-oil LSPI claim), not as a promise to the driver. ⚪
none printed as a promise

Two details matter. The Mobil, Castrol and Havoline limits are whichever comes first: mileage or one year. And Castrol's own explanation of synthetic oil says that, "unless extended service has been demonstrated and claimed, Castrol advises that motorists always follow the manufacturers’ recommendations for oil specification and grade as well as oil change interval." ⚪ A promise of a mileage is the brand's promise about its oil. What the car maker prints for your engine is in our guide on how often to change oil, and where the two differ, the maker's number is the one in your manual.

Pennzoil's page adds a second promise, a 15-year, 500,000-mile warranty, for drivers who "exclusively use" three named Platinum oils, and with conditions: the engine must have fewer than 125,000 miles and have been made in the past 72 months, sign-up is required, other conditions apply, and the page says to "change your vehicle’s oil and oil filter at least as often as recommended by the vehicle manufacturer." ⚪ It is a brand's warranty, with the conditions printed; it is not a car maker's.

Test claims on the label: percentages, "X times", and the footnote that explains them

Most brand pages print a comparison: a percentage or a multiple. The numbers are not comparable across brands, and the footnote is the only way to see why. Here is what each page printed.

Castrol EDGE. "10X Better high stress performance"; on the 0W-20 page the footnote reads "As measured in Seq IX test under high load/torque conditions vs. API SQ test limits", and on the 0W-8 page "As measured in Seq IIIH test under high load/torque conditions vs. API SQ test limits". ⚪
same words, two tests
Castrol EDGE Extended Performance. "3X Stronger than the leading full synthetic" with "Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade"; "50X Better High Temperature performance" with "As measured in Seq IIH test vs. API SQ test limits". ⚪
vs a leader and vs a limit
Pennzoil Platinum. "cleaner pistons" with "Based on Sequence IIIH results" and an exclusion for 0W-16 and Platinum Euro; "unbeatable engine protection" with "Based on Sequence IVA wear test using SAE 5W-30". ⚪
by grade and test
Royal Purple High Performance. "53% BETTER OXIDATION RESISTANCE" and "43% BETTER WEAR PROTECTION", footnote "Comparisons based on API SQ, ILSAC GF-7 requirements, and/or dexos™1 Gen3". ⚪
vs three possible bases
AMSOIL Signature Series. "72% more protection against piston deposits than required by industry standards", footnote "Based on AMSOIL Signature Series 5W-30 in the Sequence IIIH Test." ⚪
one grade, one test
Valvoline Advanced Protection and MaxLife Extended Protection. "40% stronger wear protection than industry standards" on the Advanced page; on the MaxLife Extended Protection page, "70% stronger wear protection vs. industry standards" in its benefits and "50% greater wear protection than industry standards" in a block lower down. ⚪
page prints two figures

Read the pattern: most claims are relative to a limit in an industry test ("than required", "vs. API SQ test limits") or to an unnamed competitor ("the leading full synthetic"); Pennzoil's Full Synthetic line compares itself with conventional oil, and AMSOIL's page cites a 125,000-mile truck study. A multiple of a pass limit is not a measure of engine life, and a limit differs between the test and the grade. The same Castrol words, "10X better high stress performance", are footnoted to the Sequence IX test on one grade's page and the Sequence IIIH test on another's, as printed. Valvoline's MaxLife page prints 70% in one place and 50% in another; we cannot tell whether they are the same comparison. We did not repeat or test any of the numbers.

The one independent test: what AAA did in 2017, and where it stops

The one independent laboratory comparison we found is AAA's, published in June 2017, and it compared synthetic oils with conventional oils, not brand with brand. AAA's report says it selected five oil brands at random, bought a full synthetic and a conventional SAE 5W-20 from each, and sent them to two ISO 17025 laboratories for eight ASTM bench tests, covering "shear stability, deposit formation, volatility, cold-temperature pumpability, oxidation resistance and oxidation-induced rheological changes". Its release says: "synthetic engine oils performed an average of 47 percent better than conventional oils in a variety of industry-standard tests." The report defines that number exactly: "When the percent differences across each conducted test are combined and averaged (equal weight was given to each test), synthetic oils outperformed conventional oils in the conducted tests by 47 percent." It is an average of percentage differences between test scores, not 47 percent less wear.

AAA's limits are in its own text. "Due to the cost of engine-fired dyno testing, the scope of this research was limited to ASTM bench tests used within oil certification testing." On one deposit test, "Three out of five conventional oils performed very well in the MHT test; these three oils even outperformed all synthetic oils tested. However, the remaining two conventional oils failed the ILSAC GF-5 specification by a significant margin." Blends and oils advertised for high mileage were excluded. And AAA's own reading is conditional: "If an engine oil meets specific requirements of the vehicle manufacturer, either a conventional or a synthetic oil may be used." The next sentence in the report adds: "However, a synthetic oil may provide more protection in extreme operating environments or provide some additional protection in cases where manufacturer specified oil change intervals are not closely followed by the consumer." The test is nine years old, used SAE 5W-20 oils advertised as meeting GF-5 and does not say which brand of full synthetic is better. Our guide on synthetic versus conventional oil goes through it in detail.

Past 75,000 miles: what a high-mileage label adds

Four of the nine brands print a 75,000-mile high-mileage line, and the page text is similar (Castrol's EDGE oils overview page says its EDGE High Mileage is "Formulated for vehicles with over 75,000 miles with proprietary emission system protection.") (Kendall's one-pager also lists a GT-1 Endurance product as a high-mileage synthetic blend). Valvoline's MaxLife Full Synthetic page says the oil is "Designed for vehicles with 75,000 miles or more", with seal conditioners, and its MaxLife pages cover three types: a full synthetic, an extended-protection full synthetic and a synthetic blend. ⚪ Havoline's page describes its Lifelong High Mileage Full Synthetic as designed "for high-mileage vehicles with 75,000 miles or more" with seal conditioning agents, and a High Mileage SynBlend as a blend. ⚪ Pennzoil's page lists Platinum High Mileage as full synthetic oil "for older vehicles", and its Full Synthetic High Mileage as "Specially created for vehicles with 75,000+ miles". ⚪ GM's Gen 3 list has a row named Mobil 1 Extended Performance High Mileage. 🟢 API's guide, the standard owner, lists no high-mileage category: its gasoline chart runs SQ, SP, SN and earlier letters. So "high mileage" is a brand's label on an oil that also carries an API mark.

Prices: what any page printed, and the date

Few of the pages we read printed a price, and where one did, it is a shelf price for one container on one day, not a market. On 15 and 16 November 2026, Valvoline's global webshop page for its Advanced Protection Full Synthetic 5W-30 printed $13.49 for one quart and $41.99 for five quarts (the page also says a minimum five-quart purchase is required on this product), AMSOIL's Signature Series 5W-30 page printed a retail price of $17.99 and a member price of $13.99 for a quart bottle, and Red Line's Professional-Series 5W-30 page printed $13.49 for a quart. ⚪ Pennzoil's Platinum page printed a "Save Up to $10" banner, not a price. Mobil, Castrol, Havoline, Kendall and Royal Purple pages printed no price on the pages we read. Shelf prices change, so they say nothing about what you will pay; what an oil change costs, with the labor and the filter, is in the oil change cost guide with its own dated sources.

Labels you can check, and labels you cannot

A mark on a bottle is worth what stands behind it, and the three standard owners we read differ. API says it licenses and then tests. Its page describes the program as "a voluntary licensing and certification program that authorizes engine oil marketers that meet specified requirements to use the API Engine Oil Quality Marks." 🟢 The page continues: "API has been testing packaged and bulk engine oils under its Aftermarket Audit Program (AMAP) since 1994." and "In addition to sampling licensed oils, API also samples and tests products encountered in the marketplace that are using the API certification marks without the authorization of API." 🟢 A licensee directory is on API's site. General Motors prints a comparable licence mark and number: the icon, the 11-digit alphanumeric licence number, and a public list. ACEA is different, as quoted above: a marketer self-certifies, states the class and category on the label and is responsible for product liability. 🟢 A maker code such as Ford WSS or Chrysler MS is the maker's own, and the brands' tiers show how loosely the words are used.

Does a mark on the bottle prove the oil is right for my car, and does PulsCar sell or rank oils? No to both. PulsCar publishes this guide, sells no oil and takes no payment from any oil brand; what a mark proves is the licence owner's narrower claim, that the oil met that standard. API's tests are on products it licenses and products it finds using the marks without authorization, and its page says that for a nonconforming licensed oil API "will work with the licensee to evaluate the nonconformity and take appropriate corrective action." 🟢 Your manual says what your engine needs. A mark and a licence number are how you check that the bottle claims the right thing; they do not tell you whether it is the right bottle, or whether the car needs a full synthetic rather than a blend.

Best motor oil brands: why this page ranks none, and what to ask at the counter

Which brand of synthetic oil is best, and does PulsCar rank any? PulsCar ranks none, sells no oil and has no affiliate link on this page, and the sources do not answer the question either. No standard owner, car maker or independent test we read names a best brand, and the brands' own pages compare an oil mostly with a pass limit, an unnamed rival or conventional oil. What the sources do support is narrower, and it is the order this guide follows: the oil your manual names, the marks that show a bottle meets it, and then the claims, each read with its footnote, its grade and its date, and the brands' own words about being strongest or best quoted as claims. A shopper who wants one name will not find it here, because a name would need a test that no source supplies.

No standard owner ranks brands: API's guide says oils displaying the marks meet performance requirements set by vehicle and engine makers and the industry, and that the Starburst and Shield are the marks automobile makers recommend. 🟢 No car maker we read ranks brands either; the manuals above name a specification, a licence, a code or their own genuine oil. And the one independent laboratory comparison we found did not compare brands with brands. We therefore say what sources support: the oil your manual names is the right oil for your engine, and the differences beyond that are claims you can read and weigh. This page does not call any oil best.

What to ask is our advice, built on the labels above. At a shop or a counter, ask which specification the oil in the bottle meets, and read it against your manual: API SQ or SP and ILSAC GF-7A or GF-6A for a mark; the dexos licence number on the back label if your manual says dexos; the ACEA class and category, or the maker code, if your manual names one. Ask whether it is a full synthetic or a blend if your manual says full synthetic, and ask for the grade by its SAE number. If a shop proposes an oil with a different spec, ask for it in writing, and keep the receipt.

A better oil does not change what the red light means

No page we read says that a better or longer-lasting oil changes what a warning light means. A maintenance reminder is not a warning light. If the red oil pressure light comes on while you drive, stop in a safe place and switch the engine off: Mazda, Nissan, Infiniti and Subaru print a warning against running the engine with that light on, and Nissan, Infiniti and Subaru say to contact a dealer. Our advice, not a maker's: once it is safe, wait as your manual says, then check the oil level; if it is low, add oil as your manual says, and if the level was not low, or the light stays on after adding oil or returns, do not drive on and have the car towed. Our guide to the low oil pressure warning goes through the causes. And when you do change oil, the EPA's page says to "Check with local automobile maintenance facilities, waste collectors, and government waste officials to find out when and where you can drop off your used oil for recycling." 🟢 The steps of the job are in how to change oil.

Three traps: how a careful buyer goes wrong

Trap one: reading "meets", "recommended for use", "approved" and "licensed" as one word. The brands use all four, sometimes on one page; a licence-list entry is a different thing from a claim that an oil meets a code. Check which word is printed, and for which grade.

Trap two: treating a brand's mileage as your interval. Mobil and Castrol (EDGE Extended Performance) print 25,000 miles or one year, Pennzoil 15,000 miles or one year with conditions, Havoline 10,000 miles or one year. The Mobil, Pennzoil and Havoline pages also tell you, for a car under warranty, to follow your manual or your oil life sensor (Havoline: oil warning lights), Castrol's explainer page says to follow the maker's interval unless extended service has been demonstrated and claimed, and the AMSOIL page we read prints no interval promise. A low-mileage driver who reads "25,000 miles" and skips the "or one year" has misread the line.

Trap three: buying by percentage. A multiple of a test limit says how far one oil's result sat from a pass line in one test on one grade, and the same Castrol words are footnoted to two different tests. Read the footnote, and check that the oil meets your manual's mark first.

Three composite situations, decoded

These are composite scenarios, not individual customers, built only from the printed rules above.

Situation one: the pickup owner at the shelf. A 2026 Chevrolet Silverado owner reads their manual: full synthetic, dexos1, a 0W-20 grade for the V8 engines. The shelf has a bottle that says synthetic blend with a dexos logo. GM's own list has rows for such oils, so the logo is plausible, and GM's manual sentence says full synthetic, so the blend is not what the manual asks for. The owner reads the label for the licence number and "full synthetic", and checks the grade.

Situation two: the Ram owner and the unfamiliar bottle. A Ram 1500 owner whose manual names an equivalent full synthetic 0W-20 reads that it must have the API Starburst with a certification level of API-SP or later (API-SN+ is also acceptable), and that earlier certification levels can cause damage not covered by the New Vehicle Limited Warranty. A bottle with the Starburst and GF-7A with API SQ is, by API's own sentence, a later category that includes SP, so it meets the printed line on its face (our reading); the owner still checks that the viscosity is the grade the manual prints for their engine, since the manual names different oils for different engines.

Situation three: the European owner reading codes. A Mercedes-Benz owner's manual lists approval sheets 229.71 and 229.72 for gasoline engines, with an SAE 0W-20 viscosity requirement, and says to use only approved products, with a warranty consequence. A bottle that prints ACEA C5 and nothing else is not on the manual's list, because ACEA text says specific applications are for the engine maker, and some engines suit only one category in a class. The owner looks for the MB-Approval inscription the manual describes, on the container.

What this page cannot tell you

It cannot tell you which oil your engine takes: that is in the manual for your model year and engine. We did not test any oil. We did not try the independent test pages that may sit behind walls (Consumer Reports and similar), so AAA's 2017 report is the only independent comparison here, and it did not compare brands. We could not read ILSAC's own site (no connection), SAE's J300 page (a stub) or Ford's owner manuals (refused); Ford's statement is from a page copy read on 11 November 2026. Mobil's and AMSOIL's pages refuse plain requests, so we took their text as shown on screen; Pennzoil's page builds its text with scripts and was taken the same way; Valvoline's own product pages did not load and its global webshop pages were read instead. AMSOIL's technical specifications tab did not open, so we print only what the page's text said. We read nine brands, not the market; store brands and others were not read. And pages change: a data sheet can be older than the bottle, as Havoline's 2019 sheet shows beside its 2025 page.

Your action plan

Before you shop. Find the viscosity, the specification and any approval in your manual or in the maker's own lookup, and write all three on one line, as our guide on what oil your car takes describes. If the manual says dexos, plan to read the licence number on the back label. If it names an ACEA class or a maker code, plan to find that code on the container.

At the shelf. Compare the label with that line: the API donut or Starburst with the category, the ILSAC mark if the manual names one, the approval or licence number, and the grade. Read which of "approved", "licensed", "recommended for use" and "meets" is printed. Treat any mileage as the brand's promise and any percentage as a footnote.

At the next change. Keep the receipt and the bottle's label details. Follow the interval in your manual, whichever comes first, and use how often to change oil if you want to see how makers word it. A maintenance reminder is not a warning light. If the red oil pressure light comes on while you drive, stop in a safe place and switch the engine off: Mazda, Nissan, Infiniti and Subaru print a warning against running the engine with that light on, and Nissan, Infiniti and Subaru say to contact a dealer. Our advice, not a maker's: once it is safe, wait as your manual says, then check the oil level; if it is low, add oil as your manual says, and if the level was not low, or the light stays on after adding oil or returns, do not drive on and have the car towed.

Sources and documents

Standard and licence owners (read 15 November 2026 unless marked):

Brand pages (read 15 and 16 November 2026):

Car makers (manuals and pages read 11 November 2026):

Prices verified 15 to 16 November 2026 on the shop and brand pages cited above; no price on this page is a market price.

Technical documents verified November 2026.