💡 The answer in 60 seconds

Your owner's manual decides, not the bottle. In the manuals we read, GM, Kia and the Hyundai and Genesis editions that carry the words print full synthetic. Subaru calls synthetic the required oil and allows conventional if synthetic is unavailable. Nissan, Toyota, Honda and Mazda print a viscosity (such as 0W-20) and an API or ILSAC mark, and an oil with the printed viscosity and mark, or the equivalent the manual names, is acceptable under those pages; Mazda also names its own oil as required for optimum fuel economy. Mercedes-Benz and MINI print their own approval (229.71 or 229.72; BMW Longlife-17 FE+). A blend has no printed minimum, and no manual we read recommends a blend engine oil by name. What to do: open the manual's engine oil section, copy the viscosity, the mark or approval and whether it says full synthetic, buy an oil whose label matches, and change it at the manual's interval or when the oil-life monitor asks, at least yearly where the manual says so. Switching to synthetic is allowed where the oil meets the specification, and the manuals we read do not ask for a flush. If the red oil-pressure warning light comes on while you drive, stop in a safe place and switch the engine off; Mazda, Nissan, Infiniti and Subaru warn against running the engine with it on. Our advice, not a maker's: check the oil level, add oil only if it is low, and if the level was not low or the light returns, have the car towed.

In a hurry? Jump to what the makers print, how often to change it, the red oil-pressure light and the action plan. The rest explains where the claims come from and where they stop.

This page answers one question: synthetic, blend or conventional, and what to do about it: what the words mean, whether your maker requires synthetic, whether you can switch or mix, and how often each should be changed. Which oil fits your car and how many quarts it takes is the job of our guide to what oil your car takes; the steps of a change are in how to change oil, and prices in the oil change cost guide. This page does not rank oil brands or say which oil is best.

PulsCar publishes this guide and offers a free engine-sound check; no link on this page is an affiliate link. A sound check cannot tell which oil is in your engine, and a section near the end says where it helps and where it does not.

Every figure below names its source and, where the page printed one, its date or edition; we read each on 11 November 2026. Where a page carried no date, we say so. ⚪ Maker's claim marks a company's claim about its own product, which is a claim, not proof. We did not test any oil.

What the three words mean, and who decides what they mean

Three names cover almost every bottle: conventional (also called mineral), synthetic blend (also called semi-synthetic or part synthetic) and full synthetic. They sound like three grades of one thing, and they are not defined like that.

Castrol, an oil maker, puts the definition in terms of the base oil, the liquid that makes up most of a bottle before additives. ⚪ It says the base oil in a conventional oil is "100% mineral oil which is obtained through the refining of crude oil", that for a full synthetic "100% of the base oil composition contains these stronger synthesized base oil components", and that for a semi-synthetic or part synthetic "the base oil composition is a combination of synthetic and conventional base oils." It adds: "There is no definition of how much synthetic needs to be included in a semi or part synthetic motor oil." Those are a company's claims. Two sources that do not sell oil are consistent with that: API's licensing document never uses the word synthetic, and AAA says the meaning of "full synthetic" is open to interpretation.

The American Petroleum Institute (API), the body that licenses the donut and starburst marks on a bottle, sorts base stocks into five groups by chemistry. In its licensing document, API 1509 (twenty-third edition, February 2025), Group I and II differ in saturates and sulfur, Group III has the Group II limits with a higher viscosity index (120 or more), Group IV stocks are "polyalphaolefins (PAO)" and Group V is "all other base stocks." The word synthetic does not appear anywhere in that document. API's categories describe what a base stock is made of and leave the names to the bottle.

AAA's 2017 research report fills the gap. It says conventional oils are "refined petroleum products", that quality ones are typically composed of API Group II base stocks, and that blends "contain a secondary component consisting of an API Group III or API Group IV oil." And it records a ruling that explains why the labels are loose: "On March 1, 1999, the National Advertising Division (NAD) ruled on case #3526 involving Castrol Synthetic Engine Oil. The ruling found that "severe cracking and reforming processes" to hydroisomerize a mineral base stock is indeed a synthesis and therefore the refined product can be advertised as a synthetic oil." AAA draws the conclusion itself: "Because of this ruling, many "synthetic" oils now on the market are composed of highly processed crude oil." AAA adds that the meaning of the term "full synthetic" is "open to interpretation."

So the practical reading is short. A bottle that says full synthetic has base oil that its maker classes as synthetic, which can mean a PAO or a hydroisomerized mineral oil; a bottle that says blend has some unstated share of that in a conventional base; a bottle that says conventional is mineral. None of these words tells you the viscosity, the API level or the maker approval your engine asks for. Those are on the label and in your manual, and they are the things the makers actually print, as the next section shows.

What the manuals we read print about synthetic, side by side

Start with what the people who built the engine say, because they are the ones who set the warranty terms. Each row is one owner's manual or owner page, in its own words, for the model and edition named. Manuals for other models of the same maker can say something different, and as the Hyundai rows show, they do. We did not average anything or turn a recommendation into a rule.

General Motors, 2025 Chevrolet Silverado 1500 manual; the 2026 Equinox manual says the same. "Use full synthetic engine oils that meet the dexos1 specification." The recommended-fluids page adds: "ACDelco dexos1 full synthetic is recommended." Silverado viscosity: SAE 0W-20 for the V8s, SAE 5W-30 for the 2.7L L4 (called "2.7L L4 Turbo Engine" in its maintenance schedule; SAE 0W-30 is allowed there below -20 F); the Equinox ("1.5L L4 Turbo Engine") takes SAE 0W-20.
Full synthetic, dexos1
Hyundai, 2022 Tucson Hybrid manual. The specification table asks for API SN PLUS or above, full synthetic grade, then says: "If a lower grade engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine oil filter must be replaced as indicated severe maintenance condition." Hyundai's 2025 Tucson and 2026 LX3 web manuals carry the same rule. The 1.6 T-GDi hybrid engine takes SAE 0W-20.
Full synthetic; lower grade: severe
Hyundai, 2023 Santa Fe manual. Same maker, different words: "Requires API SN PLUS(or Above) grade engine oil. If a lower grade engine oil is used, then the engine oil and engine oil filter must be replaced at every 5,000 miles." The page does not say full synthetic. The 2.5 T-GDI engine takes SAE 0W-30.
API SN PLUS or above; no 'full synthetic'
Genesis, 2023 GV70 manual. "Requires API SN PLUS (or above) full synthetic grade engine oil. If a lower grade engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine oil filter must be replaced at every 5,000 miles (8,000 km) or 6 months as indicated for severe maintenance conditions." The 2.5 T-GDI and 3.5 T-GDI engines take SAE 0W-30.
Full synthetic, else 5,000 mi/6 mo
Kia, 2023 hybrid manual (code MQ4KH). The engine oil line for the 1.6 T-GDi hybrid and plug-in hybrid reads "Full synthetic SAE 0W-20, API SN PLUS/ SP or ILSAC GF-6".
Table: full synthetic SAE 0W-20
Subaru, North American owner's manual MSA5M2403A. "You should use synthetic engine oil that meets the same requirements given for conventional engine oil." The specifications page says: "0W-20 synthetic oil is the required oil for optimum engine performance and protection. Conventional oil may be used if synthetic oil is unavailable."
0W-20 synthetic; conventional if none
Nissan, 2026 Rogue manual (the manual describes a variable compression turbo); Infiniti's 2025 QX60 manual prints the same. "Genuine "NISSAN Motor Oil 0W-20 SP" (or equivalent) is recommended." Then: "If the above motor oil (or engine oil) is not available, a synthetic 0W-20 GF-6A SP motor oil (or engine oil) may be used."
Genuine 0W-20 SP or equivalent
Honda, 2013 Civic manual (Honda Canada; the only Honda manual we could read on Honda's own site). "You may also use synthetic motor oil if it is labeled with the API Certification Seal and is the specified viscosity grade."
Synthetic allowed with API seal
Mazda, 2021 CX-5 manual. For the 2.5 L engine: "Only use SAE 0W-20 oil "Certified For Gasoline Engines" by the American Petroleum Institute (API)." The 2.5T turbo engine takes SAE 5W-30 with the same certification wording. The same entry says: "Mazda Genuine 0W-20 Oil is required to achieve optimum fuel economy." Neither entry uses the word synthetic.
Viscosity and API mark; no 'synthetic'
Toyota, RAV4 Hybrid manual OM0R074U; the 4Runner manual OM35A83U prints the same pattern (neither file prints a model year). "Use Toyota approved "Toyota Genuine Motor Oil" or equivalent to satisfy the following grade and viscosity." The hybrid's grade is "API SN/RC multigrade engine oil" and the viscosity SAE 0W-16; the 4Runner's is ILSAC GF-5 and SAE 0W-20. Neither oil section uses the word synthetic.
API SN/RC, SAE 0W-16 (hybrid)
Mercedes-Benz, 2022 C-Class manual. The specification table lists "229.71" and "229.72" under MB-Approval for all models (229.71 is marked as recommended for the lowest possible fuel consumption), with the note "Gasoline engines: Only use SAE 0W-20 viscosity class engine oils."
MB-Approval 229.71 or 229.72
MINI, 2025 Countryman manual. "When topping up engine oil, the following oil specification applies: Gasoline engine BMW Longlife-17 FE+." The page does not use the word synthetic.
BMW Longlife-17 FE+
Ford, support page "What is the recommended engine oil for my vehicle?", undated. "Ford recommends a specific Motorcraft® engine oil type that varies by your vehicle's model year, model, and engine type." It points to the owner's manual and to Ford's lookup tools; we could not read Ford's manuals.
Look it up by year, model, engine

Three things stand out. The first is that the manuals split into three groups. GM's, and the Hyundai (Tucson Hybrid), Genesis and Kia entries above, print full synthetic as the oil to use; Hyundai's Santa Fe entry asks for API SN PLUS or above without the words. Subaru calls synthetic the required oil and then allows conventional when synthetic is not to be had. Nissan, Infiniti, Honda and Toyota print a viscosity and an industry level (API, ILSAC) or a genuine-oil name, and let an equivalent oil be used; Mazda prints an API-certified viscosity and names its genuine oil as required for optimum fuel economy. Mercedes-Benz and MINI print a maker approval (MB-Approval 229.71 or 229.72; BMW Longlife-17 FE+) that the oil has to meet. GM and Mercedes-Benz add that approved oils show it on the container (the dexos1 logo; an MB-Approval number). ⚪ Castrol's page says in general: "In general, manufacturers recommend motor oil based on viscosity grade and performance specification." It adds that where GM's dexos, European specifications or SAE 0W-20 apply, such oils "will be formulated with synthetic technology"; that is Castrol's claim, and the Honda, Mazda and Nissan pages do not require synthetic by name.

The second is that one maker can print two different things in two manuals. Hyundai's 2022 Tucson Hybrid and 2025 Tucson pages say full synthetic; its 2023 Santa Fe page asks for API SN PLUS or above and does not use the words full synthetic. The practical reading is the one the sentence itself gives: a lower grade triggers a shorter interval. That is why you read the manual for your car and not for the brand.

The third is a missing item. In every manual and owner page we read, no maker recommends a synthetic-blend engine oil by name. The words semi-synthetic appear in the Hyundai and Genesis engine-oil pages, but only as an example of a lower-grade oil, next to mineral oil. A bottle of blend that carries the right viscosity and the right API or ILSAC mark may well meet a maker's specification, and several makers say any oil that meets it may be used; none of them says "use a blend".

A requirement, a recommendation and a permission are different words

The verbs in the manuals matter, and they are not interchangeable. Read them in this order of strictness.

"Use" or "required". GM's "Use full synthetic engine oils that meet the dexos1 specification" is an instruction, and the caution under it says what ignoring it costs: "Failure to use the recommended engine oil or equivalent can result in engine damage not covered by the vehicle warranty." Mercedes-Benz's is an order too: "Do not use engine oils or oil filters other than those which meet the specifications necessary for the prescribed service intervals."

"Requires ... If a lower grade is used". This is Hyundai's and Genesis's form. It does not forbid a lower-grade oil; it prints a consequence: the oil and filter must be changed on the severe schedule, or at 5,000 miles. Hyundai says so again in its severe-service list, where "Engine oil usage which is not recommended" sits beside short trips, towing and stop-and-go driving.

"Is recommended". Nissan's "Genuine "NISSAN Motor Oil 0W-20 SP" (or equivalent) is recommended" names a preference and allows an equivalent, and then adds the warranty line: "Damage caused by the use of motor oil (or engine oil) other than as recommended is not covered under NISSAN's New Vehicle Limited Warranty." Nissan's basic-information page repeats the point in the interval sense: "Using an engine oil and filter other than the specified quality, or exceeding recommended oil and filter change intervals could reduce engine life."

"May be used". Subaru's "Conventional oil may be used if synthetic oil is unavailable" and Honda's "You may also use synthetic motor oil" are permissions. They say what is acceptable, not what is best.

The consequence is simple. If your manual says use or required, the printed oil is the oil. If it says requires ... if a lower grade is used, read the next sentence, which names the shorter interval. If it says recommended or may be used, an oil that carries the printed viscosity and mark, or the equivalent the manual names, is acceptable, and the choice among those is yours; Nissan still ties its warranty to the recommended oil or an equivalent.

What an API mark, an ILSAC mark and a maker approval tell you

The marks on a bottle are about performance, not about base oil, and they move on. API's Motor Oil Guide (2025 edition) says an oil with the starburst meets the "current ILSAC GF-7A" standard, the shield (only for 0W-16) meets GF-7B, and it lists API SQ, introduced in March 2025, as current, with SP marked "For 2025 and older automotive engines." The manuals on this page print older levels (API SN PLUS or SP, ILSAC GF-5 or GF-6), and the guide covers that: "For automotive gasoline engines, the latest ILSAC standard or API Service Category includes the performance properties of each earlier category and can be used to service older engines where earlier category oils were recommended." It also tells owners to refer to their owner's manuals first.

None of these marks says synthetic or conventional. A conventional oil can carry the API and ILSAC marks: the five conventional oils in the AAA test we describe below were all licensed by API and advertised as meeting ILSAC GF-5. A maker approval is a different kind of mark. GM's dexos1 and Mercedes-Benz's MB-Approval are approvals the maker grants: GM's manual says that engine oils that GM has approved as meeting dexos1 "are marked with the dexos1 approved logo." If your manual prints an approval, look for it on the bottle; a viscosity and an API mark do not show it.

Can you switch from conventional to synthetic, or back?

If your maker requires a specific oil, put in the oil the manual prints. If it prints a viscosity and an industry level, the makers we read allow any oil that meets them, synthetic or not, and the permissions are in writing.

Subaru's manual says synthetic engine oil is allowed on the same terms as conventional: "You should use synthetic engine oil that meets the same requirements given for conventional engine oil. When using synthetic oil, you must use oil of the same classification, viscosity and grade shown in this Owner's Manual." The same paragraph adds the condition that matters for the switch: "Also, you must follow the oil and filter changing intervals shown in the "Warranty and Maintenance Booklet"." Honda's 2013 Civic manual gives the permission in one line: "You may also use synthetic motor oil if it is labeled with the API Certification Seal and is the specified viscosity grade." Neither says a switch needs a special procedure.

The reverse direction is where the printed consequences sit. GM prints that synthetic is the oil to use, and Hyundai and Genesis print that a lower grade, which Genesis lists as "mineral oil including Semi-synthetic", moves the car to the severe schedule: oil and filter at 5,000 miles or 6 months. Going back to conventional in a car whose manual prints one of those rules is a choice with a stated cost. In a car whose manual prints only a viscosity and an API level, a conventional oil that meets them is acceptable by the manual's own terms, and that is also what AAA says in its report: "If a conventional oil meets applicable manufacturer specifications, it can be used."

Two outside voices push the same way. AAA, a motoring club, said in its June 2017 release that it "urges drivers to consider a switch to synthetic oil at their next oil change service" and: "While a manufacturer-approved conventional oil will not harm a vehicle's engine, the extra $30 per oil change could actually save money in the long run by protecting critical engine components over time." ⚪ Castrol says: "In all cases a synthetic oil can be used even if a conventional oil is suitable to gain further performance benefits afforded through synthetic technology." Both agree with the manuals on the permission; only AAA's laboratory results, discussed below, are independent evidence that the extra cost buys anything.

Two things the switch does not need, according to the manuals. First, a flush: GM's manuals say "Engine oil system flushes are not recommended and could cause engine damage not covered by the vehicle warranty." No other manual we read mentions an engine oil flush by name; Nissan, Infiniti and Subaru advise against non-approved aftermarket flushing systems on the vehicle in general. Second, an additive. GM says "Do not add anything to the oil." Honda says "Your vehicle does not require oil additives. In fact, they may adversely affect the engine performance and durability." Mercedes-Benz, MINI and Hyundai's web manuals say not to use them, and Nissan does not recommend them. None of the manuals we read says that switching to synthetic oil causes leaks; if you have heard that, it did not come from them, and the claim needs its own evidence.

Can you mix synthetic and conventional oil?

The honest reading of the manuals is that mixing is nowhere forbidden outright and only conditionally allowed. What they print falls into three kinds of statement.

Same classification, any brand. Subaru's manual, on adding oil between changes: "When adding oil, different brands may be used together as long as they are the same ILSAC and API classification and SAE viscosity as those recommended by SUBARU." That is a permission with two conditions, the classification and the viscosity.

A stop-gap, with a return to the specified oil. Subaru's specification page says that if 0W-20 synthetic oil is not available, 5W-30 conventional oil may be used if you need to add oil, and that you should change to 0W-20 synthetic oil at the next oil change. Toyota's RAV4 Hybrid manual does the same for viscosity: "If SAE 0W-16 is not available, SAE 0W-20 oil may be used. However, it must be replaced with SAE 0W-16 at the next oil change." MINI's manual allows a limited top-up: "If an engine oil suitable for continuous use is not available, up to 1 US quart/liter of an engine oil with the following oil rating can be added", listing API SL, SM and SN, while the topping-up specification stays BMW Longlife-17 FE+. Mazda's diesel entry allows an alternative oil (ACEA C3 with SAE 0W-30 or 5W-30) for top-ups and changes, but "it is strongly recommended to replace the alternative oil with Mazda Genuine SKYACTIV-D SAE 0W-30 Diesel Engine" oil.

Use the approved oil. Mercedes-Benz and GM do not print a mixing permission. Their instructions are to use oil that meets the specification, and for a car that needs a maker approval, adding an oil without that approval is not what the instruction says. We found no page that says what happens to the warranty after a one-off top-up; the manuals say what oil to use, and that is the limit of what they print.

⚪ Castrol's description adds a point: a synthetic blend is a mix, a part synthetic's base oil being a combination of synthetic and conventional components. No source we read says whether a mix you make yourself meets any specification. We could not read Mobil's or AMSOIL's pages on mixing (they were not readable to us), so we do not quote them.

The sensible reading is a short rule. Between changes, top up with an oil that has the viscosity and the classification your manual prints, and the same maker approval if it prints one. At the next change, drain and refill with the printed oil. Subaru and MINI describe a top-up with something else as a stop-gap, Mazda's diesel entry allows an alternative oil for top-ups and changes, and Toyota allows another viscosity if the specified one is not available, to be replaced at the next oil change.

Synthetic blends: what they are, and what no source says about them

A blend sits between the two on price, and the sources we read say little more than that. ⚪ Castrol: blends "provide a balance between the economy offered by conventional oil and the superior performance of full synthetic oil." On its separate page about types, Castrol says that a full synthetic formulated with a robust additive system "will always be better than synthetic blends", and that "a properly formulated semi-synthetic can offer performance benefits over a conventional motor oil." Those are a company's statements about its own range.

The independent evidence is thin. AAA's laboratory study, the only independent test we found that compares oil types, left blends out on purpose: "Evaluating semi-synthetic blends is outside the scope of this work and oils advertised as such were excluded from testing." It also excluded oils advertised for high-mileage vehicles, "which contain non-standardized additive packages." AAA's report says blends contain a secondary component of API Group III or Group IV oil; neither AAA nor Castrol prints a minimum share, and API's licensing document does not use the word synthetic at all. So we have no independent test that says a blend lands halfway between conventional and full synthetic on any measure, and no maker page that recommends one.

The Hyundai and Genesis pages treat semi-synthetic as an example of a lower-grade oil that moves the car to the severe schedule: not a ban, but a price in miles (5,000 miles or 6 months). If your manual prints only a viscosity and an API or ILSAC level, a blend that meets them meets the printed requirement. Whether it is a good buy is a price question, which the oil change cost guide handles, and a protection question that no source we read answers.

Hybrids, turbos and diesels: what the manuals say, and what they do not

Three kinds of engine get most of the questions. The manuals we read do not print a separate rule for any of them about synthetic versus conventional; they print an oil, and the oil often differs from the one in the same maker's naturally aspirated models.

Hybrids. Toyota's RAV4 Hybrid manual prints API SN/RC and SAE 0W-16, with a 0W-20 stop-gap. Hyundai's 2022 Tucson Hybrid manual asks for full synthetic API SN PLUS or above, takes SAE 0W-20, and lists oil and filter at 8,000 miles or 12 months normally and 5,000 miles or 6 months under severe usage. Kia's 2023 hybrid manual prints "Full synthetic SAE 0W-20" for its 1.6 T-GDi hybrid and plug-in hybrid. We found no maker page that prints a different oil-change interval because a car is a hybrid.

Turbo engines. The oil is printed per engine, and a turbo engine's line can ask for a thicker grade than the same maker's non-turbo engine (Mazda and GM in the rows above); GM's 1.5L turbo in the Equinox takes full synthetic dexos1 and Subaru lists its 2.4 L turbo and 2.5 L models under the same synthetic oil. Our guide to what oil your car takes goes through finding your engine's line.

Diesels. The one diesel entry we read is Mazda's, in the 2021 CX-5 manual for the SKYACTIV-D 2.2: "Mazda Genuine SKYACTIV-D SAE 0W-30 Diesel Engine Oil is required to achieve optimum fuel economy and durability for the Diesel Particulate Filter." Its caution says "If engine oil other than the specified oil is used, the Diesel Particulate Filter effective period of use will be shortened or the Diesel Particulate Filter may be damaged." Mazda ties its diesel oil to the Diesel Particulate Filter. Do not take gasoline-oil advice, including anything on this page about API SP, to a diesel. Mazda prints ACEA C3 as the alternative grade for it.

How often to change it: the intervals the makers print, with their conditions

There is no single figure for synthetic oil, and the manuals we read do not print one by oil type, apart from the lower-grade rule in the Hyundai and Genesis pages below. They print one interval for the car and the oil it specifies, a second for severe use, and in many cars a monitor that decides. Each row is one manual, in its own words, with the conditions attached. We did not average them.

Hyundai, 2022 Tucson Hybrid manual. The normal maintenance schedule marks engine oil and engine oil filter for replacement (R) in every column, and the columns step by 8,000 miles or 12 months, whichever comes first. Under severe usage the chart says "Every 5,000 miles (8,000 km) or 6 months".
8,000 mi or 12 mo; severe 5,000 or 6 mo
Hyundai, 2023 Santa Fe manual. The same two intervals. Hyundai adds that the normal interval is based on the recommended engine specification.
8,000 mi or 12 mo; severe 5,000 or 6 mo
Genesis, 2023 GV70 manual. Normal schedule: replace in every 8,000-mile or 12-month column. Under severe usage: "Replace every 5,000 miles (8,000 km) or 6 months", for the driving conditions the chart lists, which include stop-and-go driving and the use of a lower-grade oil.
8,000 mi or 12 mo; severe 5,000 or 6 mo
Kia, 2024 web manual (code SK3). Normal schedule: replace at every 8,000-mile or 12-month column. Under severe usage: "Every 5,000 miles (8,000 km) or 6 months".
8,000 mi or 12 mo; severe 5,000 or 6 mo
Nissan, 2026 Rogue manual (variable compression turbo engine schedule). The schedule lists replace engine oil and filter at 7,500 miles or 12 months, and "If the oil replacement indicator is displayed, please change the engine oil and filter within two weeks or less than 500 miles (800 km)."
7,500 mi or 12 mo; indicator decides
Mazda, 2021 CX-5 manual. Schedule 1, for U.S.A. and Puerto Rico residents, uses the flexible oil maintenance setting: "The engine oil and filter must be changed at least once a year or within 12,000 km (7,500 miles) since last engine oil and filter change." Its Schedule 2, for severe driving conditions, has a fixed row with engine oil and filter every 6 months or 5,000 miles, for cars that idle for long periods or drive in dust.
Monitor, 12 mo or 7,500 mi max; severe 5,000/6 mo
General Motors, 2025 Silverado 1500 manual. An oil life system decides, and the maintenance page adds a check of the oil level and oil life percentage every 7,500 miles: "The engine oil and filter must be changed at least once a year and, at this time, the system must be reset."
Oil life system; at least yearly
Honda, 2013 Civic manual. The Maintenance Minder shows the remaining oil life as a percentage, and "If a message SERVICE does not appear more than 12 months after the display is reset, change the engine oil every year."
Monitor; every year at the latest
Mercedes-Benz, 2022 C-Class manual. The ASSYST PLUS service interval display gives the remaining time or distance, and the manual says to follow the prescribed intervals; it states no oil mileage of its own in the pages we searched.
Service display; prescribed intervals
MINI, 2025 Countryman manual. Condition Based Service decides the maintenance recommendation. The manual points to a maintenance booklet for U.S. models for further information on service work and recommends not exceeding the service intervals indicated in the vehicle; we did not read the booklet.
Condition Based Service
Subaru, North American manual MSA5M2403A. "Change the oil and oil filter according to the maintenance schedule in the "Warranty and Maintenance Booklet"." The number is in a separate booklet that we did not read.
In a separate booklet (not read)
Toyota, RAV4 Hybrid manual OM0R074U and 4Runner manual OM35A83U (neither file prints a model year). Both point to a separate Scheduled Maintenance Guide or Owner's Manual Supplement for maintenance items and schedules; the oil section prints capacity and grade only. We did not read those guides.
In a separate guide (not read)

Four things follow from the grid. First, the printed normal intervals run from 7,500 miles (Nissan, with its indicator) and 8,000 miles (Hyundai, Genesis, Kia) to a maximum of 10,000 miles (Toyota's 2025 Camry, Mazda's 2026 CX-5, Ram's 2026 1500), and a year. The severe figure is 5,000 miles or 6 months in the Hyundai, Genesis and Kia pages, and in Mazda's fixed row for cars that idle for long periods or drive in dust. We found no maker printing 15,000 miles as the distance between oil changes, and none of the manuals read for this page prints 3,000 miles as a normal oil interval; GM's 3,000-mile figure is a fallback after an accidental reset, described below.

Second, the interval belongs to the car and the oil it asks for. Nissan: "The oil and oil filter change intervals for your engine are based on the use of the specified quality oils and filters." Hyundai prints the same condition, and for a lower-grade oil the number is 5,000 miles or 6 months in its Tucson Hybrid schedule and in Genesis's. A better oil than the printed one does not extend the maker's interval in any manual we read, and Mercedes-Benz is the bluntest: "Do not alter the engine oil or oil filter in order to achieve longer change intervals than prescribed."

Third, the oil company and AAA say the same. ⚪ Castrol: "Castrol always recommends that one follow the vehicle manufacturers recommendation for oil service and engine oil drain intervals." AAA's report: "Regardless of the oil used, the vehicle manufacturer recommendation for oil change intervals should be followed." The same report says a synthetic "may provide more protection in extreme operating environments or provide some additional protection in cases where manufacturer specified oil change intervals are not closely followed by the consumer." That is a margin for a late change, not a licence for one.

Fourth, time counts as well as miles. Every mileage-and-time schedule above is "whichever comes first", and GM, Honda, Mazda and Nissan each print a one-year ceiling for the monitor.

Oil-life monitors: what they calculate, and what the makers say about them

Many cars decide the interval for you. The monitor is the maker's own calculation; Hyundai says it assumes the recommended oil.

What they calculate. GM: "This is based on a combination of factors which include engine revolutions, engine temperature, and miles driven." Honda: "Based on the engine operating conditions, the remaining engine oil life is calculated and displayed as a percentage." Nissan: "It calculates engine oil and filter change intervals based on driving conditions." MINI: Condition Based Service "determines the maintenance recommendation using sensors and special algorithms that take into account the operating conditions of the vehicle."

What to do when it speaks. Nissan: within two weeks or less than 500 miles. Mazda: "Change the oil as soon as possible within the next 1,000 km (600 mile) or 15 days." GM: within the next 600 miles when CHANGE ENGINE OIL SOON shows, and near 0% on cars without that message. Reset it every time: GM says "Always reset the engine oil life to 100% after every oil change. It will not reset itself." Hyundai says "Always reset the remaining engine oil life whenever the engine oil is changed."

What the monitor does not know. Hyundai's Santa Fe manual: "Oil Life Management System works when the recommended engine oil is used. So, if recommended engine oil is not used, replace the engine oil according to the maintenance schedule under severe usage conditions. Also, check the amount of engine oil regularly as this system assumes that the engine oil is being filled normally." That is Hyundai's, for that car. Mercedes-Benz says: "The ASSYST PLUS service interval display is only an aid."

If it fails or is reset by mistake. GM: "If the system is ever reset accidentally, the oil must be changed at 5 000 km (3,000 mi) since the last oil change." Nissan: "If your oil replacement indicator resets prematurely or becomes inoperative, please change the oil within six months or 3,750 miles (6,000 km) from your last oil change." Those are the only 3,000-mile and 3,750-mile oil-change figures in the manuals read for this page (Infiniti's manual repeats Nissan's 3,750), and in all of them they are a backstop.

How often should I change synthetic oil, and can PulsCar's free sound check tell me an oil change is due? The interval is the maker's, not the oil's: the manuals we read print 8,000 miles or 12 months for normal use and 5,000 miles or 6 months for severe use (Hyundai, Genesis, Kia), 7,500 miles or 12 months with an indicator (Nissan's 2026 Rogue), a monitor with a one-year ceiling (GM, Honda, Mazda), 10,000 miles as a maximum (Toyota's 2025 Camry, Mazda's 2026 CX-5, Ram's 2026 1500) or a separate booklet (Subaru; Toyota's RAV4 Hybrid, 4Runner). No manual we read lets a better oil lengthen the maker's figure, and Mercedes-Benz forbids altering the oil or filter to stretch it. PulsCar's free sound check works from about 30 seconds of engine sound and does not read oil life or oil level, so the manual, the car's own reminder and the dipstick are what tell you a change is due.

What counts as severe service, and why short trips head the lists

The severe-service lists are where a driver who has been told a longer interval is fine finds out the car is on a different schedule. Hyundai's list for the 2022 Tucson Hybrid opens with "Repeated driving short distance of less than 5 miles (8 km) in normal temperature or less than 10 miles (16 km) in freezing temperature", then extensive idling, rough, dusty or salt-spread roads, heavy traffic, repeated hill driving, towing or a roof load, taxi use, frequent high speed, stop-and-go driving and, last, the use of an oil that is not recommended. Nissan's list for the Rogue starts with "Repeated short trips of less than 5 miles (8 km)" and adds hot-weather stop-and-go traffic, extensive idling, dust, a car-top carrier and a trailer.

On why short trips matter, AAA's report says in describing what oil does: "Condensation is especially common during short trips and in cold weather when the engine does not operate long enough at full temperature to evaporate all the moisture." If your driving is on a list, start from the severe interval where your manual prints one, and know that a synthetic oil does not remove the condition.

What oil bottles claim about intervals: what we could and could not read

Oil brands also publish interval claims of their own. The pages where Mobil, AMSOIL, Pennzoil and Valvoline would print them were not readable to us, so we cannot say what they promise or on what conditions. ⚪ Castrol, the one oil company whose page on this we could read, says: "unless extended service has been demonstrated and claimed, Castrol advises that motorists always follow the manufacturers' recommendations for oil specification and grade as well as oil change interval." A bottle's claim is the oil company's; whether the car's maker accepts it for the warranty is for your manual and dealer to say.

The red oil-pressure light: stop, do not wait for the oil change

A late oil change and the red oil-pressure light are different things, and the manuals describe the stakes of each in plain terms. Nissan: "Operating your vehicle with deteriorated oil can damage the engine." MINI: "Engine oil that is not changed in timely fashion can cause increased engine wear and thus engine damage." The red oil-pressure warning light is a different thing from an oil-change reminder. It means the engine may not be getting oil pressure now. GM's manual says: "Driving the vehicle with low engine oil pressure can damage the engine and the repairs would not be covered by the vehicle warranty." Hyundai's says that driving with the light on "may cause engine failure." The steps both makers print begin the same way, with a stop in a safe place.

If the red oil-pressure warning light comes on while you drive, stop in a safe place and switch the engine off; Mazda, Nissan, Infiniti and Subaru warn against running the engine with it on. Our advice, not a maker's: check the oil level, add oil only if it is low, and if the level was not low or the light returns, have the car towed.

Our guide to the low oil pressure warning goes through what else can cause it. An oil-change reminder is a different thing: a message or indicator that the service is due, and the sections above say what to do about it.

What independent testing found, and where it stops

The one independent laboratory comparison we found is AAA's, published in a research report and a release in June 2017. It is worth knowing exactly what it did, because a headline percentage says little without its method.

What AAA did. It picked five oil brands at random from those that made both a conventional and a full synthetic oil, bought an SAE 5W-20 of each type from each, and sent them unopened to two testing laboratories. Every oil was licensed by API and advertised as meeting ILSAC GF-5. The tests were eight ASTM bench tests covering "shear stability, deposit formation, volatility, cold-temperature pumpability, oxidation resistance and oxidation-induced rheological changes".

What it found. The release says: "synthetic engine oils performed an average of 47 percent better than conventional oils in a variety of industry-standard tests." The report's own definition of that number is exact: "When the percent differences across each conducted test are combined and averaged (equal weight was given to each test), synthetic oils outperformed conventional oils in the conducted tests by 47 percent." So it is an average of percentage differences between test scores. It is not 47 percent less wear, 47 percent longer life or 47 percent more miles. And the report says one of the tests, ASTM D4742, did not find a significant difference, and "The results from the TFOUT test do not suggest that base oil composition is a significant factor in regards to oxidation resistance."

What it did not show. Four limits follow from AAA's own text.

  • Bench tests, not engines. "Due to the cost of engine-fired dyno testing, the scope of this research was limited to ASTM bench tests used within oil certification testing."
  • Five brands. On a deposit test, "Three out of five conventional oils performed very well in the MHT test; these three oils even outperformed all synthetic oils tested. However, the remaining two conventional oils failed the ILSAC GF-5 specification by a significant margin." AAA adds that five brands cannot definitively show that conventional oils as a whole vary that widely.
  • One viscosity and one specification. SAE 5W-20, GF-5 and API SN oils bought in the Orlando area; many manuals now print 0W-16, 0W-20 or 0W-30, GF-6 or SP, or maker approvals.
  • Blends and high-mileage oils were left out, as quoted earlier.

AAA's own reading, in its report: "If an engine oil meets specific requirements of the vehicle manufacturer, either a conventional or a synthetic oil may be used. However, a synthetic oil may provide more protection in extreme operating environments or provide some additional protection in cases where manufacturer specified oil change intervals are not closely followed by the consumer. Additionally, the test results suggest that use of a synthetic oil may result in less engine wear over the life of the vehicle." The words are may and suggest. A secondary-research section reviews a published study of almost 500 used oil samples from around Houston, Texas, which found "A rapid decrease in oxidation resistance occurred in mineral-based engine oils after 3,000 to 4,000 miles of use", without attributing it to the base stock or to the additive package.

AAA's report also counted what makers require. Its snapshot, taken from a shop repair database for 2016 model-year cars, found "Only two low-volume, high-performance vehicles were found to specify synthetic oil as required." It found that most makers require compliance with an internal specification for warranty purposes. That is a 2016 snapshot. The manuals on this page are mostly newer, and in them GM, Hyundai, Genesis and Kia print full synthetic.

Does the word synthetic on a bottle tell me what my car needs, and can PulsCar's free sound check help me choose between oils? No to both, on the evidence above. A bottle's word is not one that API's base-stock groups use, and what your car needs is in the manual, where the viscosity (such as 0W-20) and the API or ILSAC mark are the same things printed on the bottle's label: a viscosity, an API or ILSAC level, sometimes a maker approval, and for a few makers the words full synthetic. PulsCar's free sound check does not read an oil's type, level or condition, so it cannot say which oil is in the engine or which one to buy. For that, use the manual or the maker's own lookup (Ford's page, for one, points to a lookup by year, model and engine).

What the oil costs: one dated comparison

AAA's survey of its Approved Auto Repair shops across the United States, reported in June 2017, found a conventional oil change cost $38 on average and a synthetic one $70; for people who change their own oil, five quarts averaged about $28 for conventional and $45 for synthetic. Of 3,423 shops sent the questionnaire, 759 answered (a 22 percent response rate). AAA's release said switching would cost the average driver $64 more per year. These are averages reported in June 2017, not today's prices; the current ladder is in the oil change cost guide. If your maker prints full synthetic, the price is not a choice; if it prints a viscosity and an API level, the difference is yours to weigh against AAA's laboratory results.

Does synthetic oil void a warranty? What the manuals print

Where the manuals we read print a warranty sentence about oil, they tie it to the specification and the maintenance, not to the word synthetic.

GM: "Failure to use the recommended engine oil or equivalent can result in engine damage not covered by the vehicle warranty." The recommended oil is a full synthetic that meets dexos1. Nissan: "Damage caused by the use of motor oil (or engine oil) other than as recommended is not covered under NISSAN's New Vehicle Limited Warranty." Mercedes-Benz, in its operating-fluids notes (lubricants included): "Only use products approved by Mercedes-Benz. Damage caused by the use of products that have not been approved is not covered by the Mercedes-Benz warranty or goodwill gestures." Its engine-oil note adds: "Do not use engine oils or oil filters which do not correspond to the specifications explicitly prescribed for the service intervals." Hyundai's Tucson Hybrid manual says: "Keep receipts for all vehicle emission services to protect your warranty." Hyundai and Genesis print the lower-grade rule: oil and filter on the severe schedule.

None of the manuals we read says that synthetic oil costs a car its cover. What they name is oil other than the recommended one, filters other than the specified ones and missed intervals, which is not a rule against synthetic. A synthetic oil that meets the printed specification is the oil that the GM, Genesis, Kia and Hyundai Tucson Hybrid pages ask for. For a car whose manual prints a viscosity and a grade, a synthetic that meets them is acceptable under the manual's terms, and Subaru says so in terms.

We could not read the U.S. Federal Trade Commission's consumer pages on warranties and routine maintenance (they were not readable to us), so this page does not quote them. If your cover is in question, your own warranty booklet decides, and Hyundai's Tucson Hybrid manual says to keep receipts for emission services to protect the warranty and Kia's schedule says the same for all vehicle services; keeping oil-change receipts that show the oil's viscosity and specification is our suggestion.

Three traps: ways the synthetic decision goes wrong

Trap one: buying the word on the bottle instead of the specification on the label. Full synthetic does not tell you whether the oil meets your car's requirement. GM asks for full synthetic that meets dexos1 and says such oils carry the approved logo; Mercedes-Benz asks for MB-Approval 229.71 or 229.72; MINI's topping-up page asks for BMW Longlife-17 FE+ and allows up to 1 US quart of API SL, SM or SN oil if no oil suitable for continuous use is available; Nissan, Toyota and Mazda print a viscosity and an API or ILSAC level. A bottle that matches the word and not the specification is not what these pages describe.

Trap two: taking the bottle's interval over the maker's. A longer figure on a bottle is the oil company's claim about its own product. Mercedes-Benz forbids altering the oil or filter to stretch the interval, and Nissan says exceeding the recommended intervals could reduce engine life. If the manual and the bottle disagree, GM, Nissan and Mercedes-Benz tie their warranty wording to the oil the manual prints or approves; your own warranty booklet decides.

Trap three: dropping to a lower grade without moving to the severe schedule. In a Hyundai or Genesis whose manual says so, a lower grade oil (mineral or semi-synthetic, they say) changes the interval to 5,000 miles or 6 months. Buying the cheaper bottle and keeping the 8,000-mile habit is the specific mistake those pages describe.

Three composite situations, decoded

These are composite scenarios, not individual customers. They are built only from facts already on this page and contain no invented names or dates; the percentages and months are illustrations.

Situation one: a Genesis owner who bought a blend. The 2023 GV70 manual prints full synthetic and says a lower-grade oil, listed as mineral oil including semi-synthetic, means oil and filter at 5,000 miles or 6 months. The Genesis page supports changing it on that schedule.

Situation two: a car whose manual prints only a viscosity and an API level. The shop offers conventional and synthetic at different prices. Both are acceptable under the manual's terms if they carry the printed viscosity and mark; AAA's laboratory results favour synthetic on average, with the limits above. The interval is the manual's, whichever oil is chosen.

Situation three: a short-trip driver whose monitor still reads 60 percent after eleven months. GM says the oil and filter must be changed at least once a year, Honda says every year if no message appears in 12 months, and Mazda says at least once a year or within 7,500 miles. The printed rule is to change the oil when the monitor asks and at the year mark at the latest.

Where a free sound check fits, and where it does not

PulsCar's free sound check works from about 30 seconds of recorded engine sound: you upload the clip and see a result on screen about a minute later, free, with no card or account. It does not measure oil, and nothing on this page depends on it.

How does PulsCar's free sound check relate to oil, and when should I not record at all? It cannot tell you the oil's type, grade or level, and it cannot decide whether a car needs synthetic: that is the manual's job. If the red oil-pressure warning light is on or has just come on, or the engine knocks, ticks loudly or has lost power, a recording is the wrong first step: inspect first, following the stop-safely line above. The same goes for brakes, steering, wheel noise, any flashing or red warning light, and a burning smell or smoke. If the engine runs normally and you simply have a new noise you want a second listen to, the check is free; it comes after the dipstick, not instead of it. Hyundai's Santa Fe schedule, for one, says to check the engine oil level every 350 miles (500 km) or before starting a long trip.

For everything about the oil itself, the order the sources support is: read the manual's oil section, check the level, follow its interval, and use the manual's reset instructions if the car has a monitor.

What this page cannot tell you

  • Which oil is best for your engine. We tested no oil and read no ranking.
  • How your car's manual reads. We read manuals for particular models and editions, and another model of the same maker can print something different, as Hyundai's Santa Fe and Tucson Hybrid pages do. Honda's U.S. manual site and Ford's manuals were not readable to us, so the Honda rows come from a 2013 Civic manual on Honda Canada's site.
  • What a blend does, or what any extended-interval oil promises. The independent laboratory comparison we found left blends out, and the oil brands' interval pages were not readable to us.
  • Whether switching causes leaks. None of the manuals we read says it does, or that it does not.
  • A separate rule for hybrids. We found none printed in the hybrid manuals and pages we read.
  • What a laboratory result means on the road. AAA's 47 percent is a bench-test average across eight tests on five brands of one viscosity. It is not a wear or mileage figure.

Your action plan: this week, at the next change, and when you shop

  1. The safety line first. If the red oil-pressure warning light comes on while you drive, stop in a safe place and switch the engine off; Mazda, Nissan, Infiniti and Subaru warn against running the engine with it on. Our advice, not a maker's: check the oil level, add oil only if it is low, and if the level was not low or the light returns, have the car towed.
  2. Today. Open the manual to its engine oil section and write down the viscosity (for example 0W-20), the API or ILSAC mark or maker approval (dexos1, MB-Approval 229.71 or 229.72, BMW Longlife-17 FE+), whether it says use, required, recommended or may be used, and whether it says full synthetic. That list answers the question this page asks; what oil your car takes goes through where to find it.
  3. Before you pay more or less. If the manual says full synthetic, or requires an API level with a lower-grade rule, buy that. If it prints only a viscosity and a level, both conventional and synthetic that carry them are acceptable under the manual, and the choice is a price and protection one, with AAA's laboratory result as the only independent evidence.
  4. Ask the shop for the oil on the invoice. Ask which viscosity and which specification it will put in, and have both written on the receipt; keeping it is our suggestion, and Hyundai's Tucson Hybrid (emission services) and Kia's (all services) schedules say to keep receipts to protect the warranty.
  5. Use the maker's interval. The normal number, the severe number if your driving is on the manual's list, and the monitor if the car has one. Reset the monitor at every change. If the oil is changed by someone else, check that it was reset.
  6. Topping up. Add oil with the viscosity and classification your manual prints (and the approval, if it prints one) between changes, and go back to the printed oil at the next change. If you must use something else once, Subaru, MINI, Toyota and Mazda (diesel) print when that is allowed; all but MINI say to go back to the printed oil.
  7. If you change it yourself. Used oil is harmful: do not let it stay on your skin, never pour it on the ground, into a drain or into the trash, and take used oil and the drained filter to a place that collects them. The steps of the change itself are in our guide on how to change oil.

Sources and documents

Each page below was read on 11 November 2026. Marks: ⚪ a company's own claim about its own product. Where a page carried no date, we say so.

  1. AAA, newsroom release AAA Spills the Truth on Oil Changes, 6 June 2017; and Synthetic vs. Conventional Oil full research report, June 2017
  2. American Petroleum Institute: API 1509, Engine Oil Licensing and Certification System, twenty-third edition, February 2025 (Annex E, base stock categories); Latest Oil Categories (undated, about the 2020 introduction of GF-6A, GF-6B and SP); Motor Oil Guide, 2025 edition
  3. ⚪ Castrol USA (undated pages): conventional vs semi vs full synthetic; what is synthetic oil; synthetic blend oil; which engine oil to use; how many miles between oil changes
  4. U.S. Environmental Protection Agency, Managing, Reusing, and Recycling Used Oil, last updated 25 June 2026
  5. General Motors owner's manuals: 2025 Chevrolet Silverado 1500; 2026 Chevrolet Equinox
  6. Hyundai owner's manuals: 2022 Tucson Hybrid; 2023 Santa Fe; web manual pages for the 2025 Tucson (NX4) and the 2026 LX3, with the LX3 schedule and severe usage pages
  7. Genesis, 2023 GV70 owner's manual
  8. Kia web manuals: 2023 hybrid (MQ4KH), recommended lubricants; 2024 (SK3), recommended lubricants, normal maintenance schedule and severe usage
  9. Nissan, 2026 Rogue owner's manual; Infiniti, 2025 QX60 owner's manual
  10. Subaru, North American owner's manual MSA5M2403A
  11. Mazda, 2021 CX-5 owner's manual
  12. Mercedes-Benz, 2022 C-Class operator's manual; MINI, 2025 Countryman owner's manual
  13. Toyota, RAV4 Hybrid owner's manual OM0R074U (no model year printed in either file) and 4Runner owner's manual OM35A83U
  14. Honda Canada, 2013 Civic 4D online reference owner's manual
  15. Ford, What is the recommended engine oil for my vehicle? (undated)
  16. PulsCar homepage (sound check terms)
  17. The 10,000-mile figures: Toyota, 2025 Camry Warranty and Maintenance Guide; Mazda, 2026 CX-5 scheduled maintenance; Ram, 2026 1500 owner's manual
  18. What we could not read, and so did not quote: the Federal Trade Commission's consumer and business pages on warranties and maintenance (not readable to us); Mobil's, AMSOIL's, O'Reilly's and Valvoline's pages; Pennzoil's pages; AAA Northeast's article; Ford's owner manuals and support pages other than the one listed; Honda's U.S. owner-manual site (so the Honda rows use the 2013 Civic manual from Honda Canada); Toyota's newer manual pages; the booklets Subaru and MINI point to and Toyota's RAV4 Hybrid and 4Runner guides

Prices verified: 11 November 2026 (this page carries one dated 2017 price comparison and no current prices; the price ladder is in the repair guide it links to) · Technical documents verified: 11 November 2026 · Reviewed quarterly

Saw a figure or a source that differs from this page? Email [email protected] with the source and its date.