Support the car safely, drain, replace the washer, change the filter, refill to your manual's amount, check the level, reset the reminder. Never get under a car held up only by a jack. Put jack stands under the lift points your owner's manual shows, on hard, level ground with the parking brake on, before any part of you goes under it. Hot oil, a hot drain plug, a hot filter and hot exhaust parts burn. Wear gloves and eye protection and give the engine the time your manual gives to cool before you reach under the car. Of the ten makers whose manuals or owner's-manual web pages we read, only Nissan and Infiniti print the whole procedure; most of the others print a way to read the level, the capacity and some of the warnings, and several recommend or say to use a dealer. Drain plug and filter torque numbers are on this page only for the Nissan Rogue and Frontier and the Infiniti QX60, because only those manuals print them; for any other car, use your own manual's number or let a shop do it. If you cannot lift and support the car safely, cannot reach the drain plug and filter, or your manual recommends or tells you to have a dealer or technician change the oil, let a shop do it. Never pour used oil on the ground, down a drain or into the trash. Collect it in a leak-proof container, drain the old filter, and take both to a place that collects used oil. Wash skin that touched used oil with soap and water.
We make PulsCar, which has a free engine sound check. This page sells nothing and has no affiliate links. Nearly everything on it is what other people print; where a line is our own advice, we say so. The sources are car makers' owner's manuals, one filter maker's and one jack-stand maker's pages, the U.S. Environmental Protection Agency and a state recycling agency, read on 11 and 12 November 2026 and saved as text.
The question here is narrow. You want to change the engine oil and the oil filter yourself, or decide whether to. What are the steps, what do the makers warn about, how much oil goes in, how is the level checked, how is the reminder reset, and where does the old oil go? Which oil your car takes, how much a shop charges, what a leak means and what the red oil light means are other questions: our guide on what an oil change costs holds the prices, why a car leaks oil covers drips, and the low oil pressure warning covers the red light. This page does not choose an oil for you, does not say whether to use synthetic or conventional oil or how often to change it, and gives no prices.
An oil change looks like one procedure, and the manuals show it is several. We read the maintenance and capacity pages of Chevrolet, Genesis, Hyundai, Infiniti, Kia (capacity tables only), Mazda, Mercedes-Benz, MINI, Nissan and Toyota. Two of them, Nissan and Infiniti, print every step, with torque for the filter and the drain plug. Most of the rest print the level check or a way to read the level, the capacity, some warnings and, for most, a reset, and several recommend or say that the change itself is for a dealer. The steps below are the Nissan and Infiniti order, with the other makers' warnings and differences added and named where they differ. They are not any one manual and they do not replace yours.
We did not read the owner's manuals of Honda, Ford, Jeep, Ram, Chrysler, Dodge, Volkswagen, BMW (we did read MINI, same group), Volvo or Tesla; the Subaru manual file we saved was truncated and could not be used. We also found no readable oil-change article from the oil makers, and read only one filter maker's pages. If you drive one of those cars, use this page for the questions to look for in your own manual.
Before you start: when the answer is a shop
Start with the cases where the manual itself points away from the driveway. If you cannot lift and support the car safely, cannot reach the drain plug and filter, or your manual recommends or tells you to have a dealer or technician change the oil, let a shop do it.
Several makers point to a dealer. Nissan's Rogue manual, in the middle of its own do-it-yourself section: "NISSAN recommends having your oil changed by a NISSAN dealer." Mazda's CX-5 manual: "Changing the engine oil should be performed by an Authorized Mazda Dealer." Hyundai's Santa Fe manual: "Have the engine oil and filter changed by an authorized HYUNDAI dealer according to the Oil Life Management System function or the Maintenance Schedule at the beginning of this chapter." Genesis says the same of an authorized retailer of Genesis Branded products. MINI: "The vehicle manufacturer recommends having engine oil changed by an authorized service center or another qualified service center or repair shop." Mercedes-Benz: "Mercedes-Benz recommends that you have the oil change carried out at a qualified specialist workshop." Chevrolet's Silverado says its dealer has trained service people who will perform the work and reset the system. Nissan, MINI and Mercedes-Benz word the oil change as a recommendation (Mercedes-Benz's maintenance section also says: "Always have the prescribed maintenance work carried out at a qualified specialist workshop."); Hyundai's Tucson Hybrid manual says "We recommend that the engine oil and filter be changed by an authorized HYUNDAI dealer"; Mazda says the change should be performed by a dealer, and Hyundai's Santa Fe and Genesis say to have it done by an authorized dealer or retailer. We found no sentence in these pages that forbids the owner to do it, and the Nissan and Infiniti manuals print the steps anyway. A later section covers warranty and receipts.
There is no dipstick. The Mercedes-Benz and MINI manuals we read print no dipstick; both show the level electronically. The C-Class reading can take up to 30 minutes of normal driving, longer if driven hard; MINI's needs about 30 minutes of normal driving, and its stationary detailed measurement, started from the vehicle menu with the engine at operating temperature, reads it while the car stands. If you cannot run that check, a shop is the simpler answer (our advice).
The car has no engine oil. An electric car has none to change. The Chevrolet Equinox EV manual we saved has no engine-oil section at all; a plug-in hybrid or a hybrid does, and its own section applies.
There is no safe way to hold the car up. A shop with a lift is the answer when the ground is soft or sloping (MINI warns the jack may slip on soft or slippery ground, and Torin says to work on a hard, level surface), when you do not have stands, or when the car sits so low that you cannot get a drain pan under it (the last two are our advice). The next sections say what the makers print about supporting a car.
You are not sure what you are looking at. If the plug is already rounded or stripped (our advice), or if the filter sits where you cannot reach it or loosen it, stop, put the car back on the ground and ask a shop. FRAM, a filter maker, says on its own page that a reader who is new to car maintenance or not confident should consult a professional mechanic.
What you need: oil, a filter, a pan, stands and a few tools
The manuals that print a procedure name the kit in passing, and between them they name most of it. Nissan and Infiniti: a floor jack and safety jack stands with a suitable adapter on the stand saddle, "a large drain pan", a wrench for the drain plug, "an oil filter wrench", "a clean rag", a new washer for the drain plug, clean engine oil for the new filter's gasket, and the recommended oil, poured through the filler opening. Toyota's RAV4 Hybrid manual lists one more item for topping up: a clean funnel.
What each item is for, in the order you use them:
- The oil and a new filter that match your car. Which oil your car takes, and how much, is a different question with its own page. Take the viscosity, the specification and the filter from your own manual (Nissan's Frontier manual sends the owner to a dealer parts department for the proper filter); this page does not choose them.
- Jack stands, and a floor jack to lift the car. The next section covers why the stands are not optional.
- A drain pan with room for all the oil. Compare the capacity in your manual with the pan's printed size before you start (our advice).
- A wrench that fits the drain plug, and a new drain plug washer. Nissan's step: "Clean and re-install the drain plug with a new washer."
- An oil filter wrench, for a spin-on filter like the one the Nissan steps describe. Nissan's step is to loosen the filter with the wrench and remove it by turning it by hand.
- A torque wrench, if you want to apply a printed torque. No manual we read lists one for the drain plug or filter; a printed torque figure is applied with one. Our note, not a maker's.
- Gloves, eye protection, rags and a funnel. FRAM, a filter maker: "Always wear gloves, safety glasses, and protective equipment when servicing your vehicle." Toyota's manual lists a clean funnel for topping up and has you hold a rag under the dipstick.
- A leak-proof container for the used oil. Nissan's Rogue warning says to store used engine oil in marked containers out of the reach of children.
Get the car up the way the makers print it, and keep out from under a jack
Never get under a car held up only by a jack. Put jack stands under the lift points your owner's manual shows, on hard, level ground with the parking brake on, before any part of you goes under it.
That is the page's rule, and the manuals say the same things in their own words. Nissan's Rogue and Frontier procedures put it as a step: "Raise and support the vehicle using a suitable floor jack and safety jack stands." The next lines: place the stands under the vehicle's jack-up points, and attach a suitable adapter to the stand saddle (the cup the car rests on). Both Nissan manuals, and Infiniti's, add a caution: "Make sure the correct lifting and support points are used to avoid vehicle damage." Toyota's RAV4 Hybrid manual, in its flat-tire section, says: "Do not put any part of your body under the vehicle while it is supported by the jack." A few lines later: "Use a jack stand if it is necessary to get under the vehicle." MINI's Countryman manual: "When the vehicle is raised with the jack, do not lie under the vehicle and do not switch on the drive-ready state."
The jack in the trunk is for changing a wheel. MINI's manual: "The jack is only provided for short-term lifting of the vehicle for wheel changes." The Nissan and Infiniti procedures name a floor jack and stands, not the car's own jack, and we read no maker page that approves working under a car on the jack that came with it.
Level ground, parking brake, wheels blocked. Nissan's first step is to park the vehicle on a level surface and apply the parking brake. Hyundai's level-check steps, a different task, ask for the car to be on level ground in Park with the parking brake set and the wheels blocked. Toyota's flat-tire procedure starts by chocking the tires; we would block the wheels that stay on the ground (our note). Torin, a jack and jack-stand maker, says in its own questions and answers: "Before lifting, park your vehicle on a hard, level surface, switch off the engine, and secure the vehicle against rolling." It says to position "properly rated jack stands at approved support points" and, in its answer on the difference between a floor jack and a stand: "Never work underneath a vehicle supported only by a hydraulic jack." Its page prints no rating that fits your car: it names one product, a set advertised at 12 tons per pair, and says not to assume each stand carries the full pair rating. We give no figure; check the rating printed on your own stands against your car's weight.
The steps, in the order Nissan and Infiniti print them
This is the order Nissan's Rogue and Frontier and Infiniti's QX60 print, with the other makers' differences marked where they matter. It is not any one manual and it does not replace yours. The stands rule and the burn warning above apply to every step.
- Read your manual's capacity and your oil and filter first (our step, not Nissan's). Know how much oil goes in and which filter fits before the car is in the air.
- Park on a level surface and apply the parking brake. Nissan's first step.
- Decide how warm the engine will be. Nissan's Rogue: "Run the engine until it reaches the operating temperature." Then turn it off and wait more than 10 minutes. Infiniti and the Frontier wait 15 minutes. Hyundai's Santa Fe and Genesis say the oil is very hot right after driving and to replace it after it has cooled down. Hot oil, a hot drain plug, a hot filter and hot exhaust parts burn. Wear gloves and eye protection and give the engine the time your manual gives to cool before you reach under the car. If your manual prints no wait, our advice is to let the engine cool until the oil pan and the exhaust are no longer hot to the touch. The next section sets out the split.
- Raise the car and support it on stands, then remove the undercover if there is one. Do not go under it until it stands on the stands.
- Place a drain pan under the drain plug. On the Frontier and the QX60 the pan goes under the drain plug and the filter.
- Take off the oil filler cap, then undo the drain plug with a wrench and let the oil drain completely. Nissan: "Remove the drain plug with a wrench and completely drain the oil." Its caution: "Be careful not to burn yourself, as the engine oil is hot."
- If you are changing the filter, loosen it with an oil filter wrench and finish by hand. Nissan's Rogue marks the filter steps in its own list (its steps 4 to 7) as to be done "only when the engine oil filter change is needed." Let the old filter drain over the pan; the EPA says to drain used filters before recycling them.
- Wipe the filter's mounting surface with a clean rag, and make sure no old gasket is left on it. Nissan's caution: "Be sure to remove any old gasket material remaining on the sealing surface of the engine. Failure to do so could lead to an oil leak and engine damage."
- Coat the new filter's gasket with clean engine oil. Nissan's step: "Coat the gasket on the new filter with clean engine oil."
- Screw the new filter on until you feel slight resistance, then tighten it the amount your manual gives. Nissan: "Screw in the oil filter clockwise until a slight resistance is felt, then tighten additionally more than 2/3 turn." It prints a filter torque of 11 to 15 ft-lb (15.0 to 21.0 N·m) in the Rogue; FRAM says to tighten by hand (one of its pages: by hand or with a wrench) and not to over-tighten.
- Clean the drain plug, fit a new washer (the soft ring that seals the plug; FRAM calls it a crushable drain plug gasket) and tighten the plug. Nissan's Rogue gives 22 to 27 ft-lb (30.0 to 37.0 N·m) and adds "Do not use excessive force."
- Refill through the filler opening with the oil your manual names, starting a little under the amount it gives (our advice), and put the cap on securely. Keep the dipstick in place, as Nissan says, to prevent oil spilling from the dipstick hole.
- With nobody under the car, start the engine and look at the drain plug and the filter for leaks. Nissan: "Start the engine and check for leakage around the drain plug and the oil filter." Look from beside the car with a light, clear of the belts and the fan, and switch the engine off before you reach for anything that drips (our advice).
- Switch the engine off, refit the undercover and lower the car carefully. Nissan lists the undercover and the lowering as its last steps, after the level check. We put them first (our note): a dipstick reads true only on level ground, so lower the car before you check. Torin says to use the jack to take the load off the stands before removing them and to keep every part of your body out from under the car while you adjust or remove them.
- Wait, check the dipstick, then reset the oil-life reminder. Nissan's Rogue waits more than 10 minutes and says to add oil if necessary; Infiniti waits more than 15. Add oil in small amounts and check the level each time. Too much oil can damage the engine as well as too little, so the level belongs between the marks, never above the top one.
- Take the used oil and the old filter to a collection point, as the used-oil section below says: in a leak-proof container, with the filter drained.
Warm or cool when you drain: the makers do not agree
The manuals do not agree on the drain. Nissan and Infiniti have the engine warmed first and give no reason; Hyundai's Santa Fe and Genesis give a reason for cooling first: the oil is very hot and can burn. The other manuals we read print neither for a drain.
Hot oil, a hot drain plug, a hot filter and hot exhaust parts burn. Wear gloves and eye protection and give the engine the time your manual gives to cool before you reach under the car. Nissan's caution in the drain step is "Be careful not to burn yourself, as the engine oil is hot." Hyundai's: "The engine oil is very hot immediately after the vehicle has been driven and can cause burns during replacement. Replace the engine oil after the engine oil has cooled down." Nissan's warning sits in a procedure that has you warm the engine first. Chevrolet says its dipstick handle may be hot enough to burn you, and Mercedes-Benz warns that oil that touches hot engine parts may ignite.
If your manual prints a procedure, follow its order. For information only: the Nissan and Infiniti wait of 10 to 15 minutes after warming up is the only printed time we found for a drain, and the Hyundai and Genesis caution is the only car maker's statement for the cool-down side of a drain: cooled down, with no time given (FRAM's stuck-filter page also says to let the engine cool down before removing a filter by hand, and Mercedes-Benz says to let it cool before refilling). Nobody prints a cold-engine drain time in the pages we read, so we give none.
The drain plug and its washer
Nissan takes off the oil filler cap first, then undoes the drain plug with a wrench and drains the oil completely. After the filter steps it cleans the plug, fits a new washer and tightens it.
Nissan's Rogue step: "Clean and re-install the drain plug with a new washer. Securely tighten the drain plug with a wrench." The Rogue step goes on with the number and adds "Do not use excessive force."; the Frontier and QX60 steps carry the same sentence. Those sentences hold the whole rule on this part, and the numbers are the only ones printed in the pages we read for this job: one for the Rogue, another for the Frontier and the QX60.
Where a number is printed, the manual's number wins (ft-lb and N·m are units of tightness, read off a torque wrench; our note), and the numbers are for those cars. A figure printed for a Rogue is not the figure for a Mazda or a Chevrolet. Where the table says none printed, we searched those manuals for a drain plug or filter figure and found none; workshop manuals may carry one, but we read none, so we print none. If you cannot find a printed number for your car, that is a reason to let a shop do the change (our advice).
A new washer each time. Nissan's Rogue and Frontier and Infiniti's QX60 all say to fit a new washer. None of the other manuals we read says anything about the washer, and we found no car maker that says to reuse one. FRAM, a filter maker, says you can reinstall the old drain plug and replace the gasket if your vehicle uses a crushable one; Nissan and Infiniti say a new washer. We read no washer maker's page, so we make no claim about what a worn washer does beyond Nissan's instruction.
The filter
Nissan's list, which Infiniti's matches: loosen the oil filter with an oil filter wrench and finish removing it by turning it by hand; wipe the engine's mounting surface with a clean rag; check that no old gasket remains on it; coat the new filter's gasket with clean engine oil; screw the filter on clockwise until a slight resistance is felt, then tighten "more than 2/3 turn." Nissan's Rogue prints 11 to 15 ft-lb (15.0 to 21.0 N·m) for the finished tightness. FRAM's page on stuck filters puts the turn at a different figure: "Most filters need about three-quarters of a turn after the gasket makes contact with the engine." Two-thirds and three-quarters of a turn are close, but they are two printed numbers from two sources, and the one for your car is the one in your manual; FRAM also says to tighten by hand (its other page: by hand or with a wrench) and not to over-tighten, and its pages print no torque.
Two lines in that list repay attention. The first is the old gasket. Nissan's caution: "Be sure to remove any old gasket material remaining on the sealing surface of the engine. Failure to do so could lead to an oil leak and engine damage." FRAM, a filter maker, says the same from its side: "Remove the old gasket before installing the new filter. A double gasket can cause oil leaks and make the filter difficult to remove." Look at the mounting surface before you screw the new filter on. The second is the dipstick. Nissan says the dipstick "must be inserted in place to prevent oil spillage from the dipstick hole when filling the engine with oil."
Which filter. Nissan's Frontier manual: "It is recommended that you use a Genuine NISSAN oil filter or equivalent, visit your NISSAN dealer parts department for proper part." Mercedes-Benz: "Do not use engine oils or oil filters which do not correspond to the specifications explicitly prescribed for the service intervals." Use the filter your manual or the maker's own parts page names for your engine. We read one filter maker's pages, FRAM's, which print no part numbers for your car; this page does not say which brand fits.
Spin-on and cartridge filters. The pages we read describe only the spin-on type, a can that screws onto the engine. A car whose filter is a different type from the spin-on can described in these pages is one where the maker's page or a shop is the source: none of the manuals we read prints other filter types' steps or any cap torque (our note).
You can change the oil without the filter. Nissan's Rogue list marks the filter steps as steps to perform only when the filter change is needed.
Refill: the amount, and how to add it
The amount of oil is printed as a capacity, and it is approximate. Nissan's Rogue: "The drain and refill capacity depends on the oil temperature and drain time. Use these specifications for reference only. Always use the dipstick to determine the proper amount of oil in the engine." Several makers print one figure for a change with a filter and another for one without; Hyundai's and Kia's web pages (codes LX3, SK3 and MQ4KH) print one drain and refill figure. The full side-by-side of capacities, and how to find the figure for your own car, is the business of our guide on which oil your car takes and how much. Here are the lines that matter for the job itself:
The table is what the manuals print for the models named. It is not a lookup for your car, and the capacity depends on the engine in it.
Add in stages (our advice, resting on the maker texts below). Pour in less than the capacity, wait, check, and add the rest in small amounts. Hyundai's Tucson Hybrid manual says: "Do not overfill with engine oil. Add oil in small quantities and recheck level to ensure engine is not overfilled." Chevrolet prints a rule for a low level: if the oil is below the cross-hatched area at the tip of the dipstick and the engine has been off for at least 15 minutes, add 1 liter (1 quart) of the recommended oil and then recheck the level.
Overfilling hurts too. Add oil in small amounts and check the level each time. Too much oil can damage the engine as well as too little, so the level belongs between the marks, never above the top one. Chevrolet: "Do not add too much oil. Oil levels above or below the acceptable operating range shown on the dipstick are harmful to the engine." If the level is above that range, Chevrolet says the engine could be damaged and to drain the excess oil or limit driving and have a service professional remove it; Mercedes-Benz says to have excess oil removed at a workshop. Mazda: "Do not overfill the engine oil. This may cause engine damage." Toyota's RAV4 Hybrid: "Avoid overfilling, or the engine could be damaged." Mercedes-Benz: "Too much engine oil can damage the engine or the catalytic converter."
Reading the level afterward: dipstick, or no dipstick
The maker's waiting time is part of the reading: the oil that went in has to settle into the pan, or the dipstick shows less than is there. The manuals differ on how long; the guide linked above has a similar table for other models.
Every manual with a dipstick wants the car on level ground and the dipstick wiped and reinserted fully before the reading; the electronic readings on the Mercedes-Benz and MINI pages work differently. Mazda: "The level is normal if it is between the MIN and MAX marks." The Mercedes-Benz and MINI pages we read show the level on a display instead of a dipstick, and the reading takes time. Mercedes-Benz's C-Class: "Determining the engine oil level can take up to 30 minutes with a normal driving style and even longer with an active driving style." Its messages give a refill of 1.1 US quarts (1 liter) when the level is below the minimum mark and ask the owner to have excess oil drained at a workshop when it is above the maximum. For the C-Class, an oil change in the driveway ends with a measurement that can take up to 30 minutes of driving. MINI prints a second method as well, a stationary detailed measurement started from the vehicle menu with the engine at operating temperature, so read that page of your manual before you assume there is no check while parked.
First start and the leak check
When the new oil is in, the cap is on and the plug and filter are tight, start the engine and look. Nissan's step: "Start the engine and check for leakage around the drain plug and the oil filter." FRAM, which makes filters, prints the same check with a time: start the engine, let it run for a few minutes and look for leaks around the filter and the drain plug. Our advice, not a maker's: wipe the plug and the filter's rim dry before the first start so a fresh bead of oil shows, and look with a light from beside the car while the engine runs, clear of the belts and the fan.
After the first start, look for a drip at the drain plug and the filter. If the red oil-pressure light stays on, flickers or comes on while driving, or the engine knocks, pull over safely and switch the engine off; do not drive on. If the engine knocked, have the car towed. Otherwise check the dipstick once the oil has drained back; if the level was low, add oil as your manual says; if the level was not low, or the light stays on or comes back, have the car towed. If your manual tells you to call a dealer for this light, do that instead of adding oil.
That paragraph is our wording. The flicker case is Nissan's: its Frontier manual says that if the light flickers or comes on during normal driving, pull off the road and stop the engine immediately. The dipstick step follows Mazda's page; Toyota and Nissan print only stop and call a dealer (Nissan: "Stop the engine immediately and call a NISSAN dealer."). Mazda's CX-5 manual says of its oil-pressure light: "Do not run the engine if the oil pressure is low. Otherwise, it could result in extensive engine damage." Its steps for a light that comes on while driving are to park off the road, turn off the engine, wait 5 minutes for the oil to drain back, inspect the level and add oil if it is low, being careful not to overfill, and then start the engine and check the light; if the light stays on, it says to stop the engine immediately and have the vehicle towed to an authorized dealer. Toyota's RAV4 Hybrid says of its low-pressure light: "Immediately stop the vehicle in a safe place and contact your Toyota dealer." Hyundai's Santa Fe manual says low oil pressure from too little oil lights the warning and activates a protection system that limits the engine's power. Nissan adds a point that matters after a change: the oil pressure light "is not designed to indicate a low oil level", and the level is to be checked with the dipstick. A light that stays off tells you nothing about how much oil is in the pan, so the dipstick check after the change is not optional. Our guide on the low oil pressure warning covers what the red light means and why it is not a maintenance reminder.
Reset the oil-life reminder, and only after the oil has been changed
Most of the makers we read tell the owner to reset the reminder after every change, and most print their own steps (Mazda sends the owner to its Mazda Connect manual). A reset starts a new count; it does not look at the oil. Chevrolet puts the two halves of the rule in two places. The Silverado's page: "Always reset the engine oil life to 100% after every oil change. It will not reset itself." The Equinox's vehicle-status page: "Do not reset the Oil Life display at any time other than when the oil has just been changed." If the oil-life system is reset by accident, Chevrolet says the oil must be changed at 3,000 miles since the last change.
Hyundai adds why: "Always reset the remaining engine oil life whenever the engine oil is changed. Otherwise, The indication of remaining Oil life in the Oil Life Management System may not be accurate." Mazda's CX-5 manual says a reset of the engine control unit is necessary whenever the engine oil is replaced, and that otherwise the oil warning light or the wrench light may come on at the wrong time. Nissan's Oil Control System page says to change the oil within two weeks or less than 500 miles once the replacement indicator shows. Your own manual's page and menu names are the ones to use (our advice); Hyundai adds that the oil-life system is fitted only on some vehicles.
If a shop changes your oil, ask whether it reset the reminder (our advice): a shop that changed the oil but left the old count running has set you up for a reminder that is wrong.
Hybrids, turbos and diesels
Which oil a hybrid, a turbocharged or a diesel engine takes is covered in the page on which oil your car takes. For the job itself, the manuals we read change little.
Hybrids and plug-in hybrids. The oil sections use the same level and used-oil warnings as the gasoline cars, with the hybrid system called by its own name. Toyota's RAV4 Hybrid says to warm up and turn off the hybrid system and wait more than 5 minutes before the dipstick, and MINI, whose pages we read do not single out a hybrid, says to switch off the drive-ready state before adding oil.
Turbo engines. Mazda's CX-5 lists a different capacity for its turbo 2.5 than for the plain 2.5 (5.1 and 4.9 US quarts with and without a filter change, against 4.8 and 4.5). The method is not different in any page we read.
Diesels. Of the pages we read, Mazda's CX-5 diesel is the case where the oil carries a special warning; the Silverado manual sends diesel owners to a supplement we did not read. The manual: "SKYACTIV-D 2.2 uses specified oil. Please confirm the specification in owner's manual. If engine oil other than the specified oil is used, the Diesel Particulate Filter effective period of use will be shortened or the Diesel Particulate Filter may be damaged." It says its diesel takes 5.4 US quarts with a filter change and 5.1 without. A diesel's oil is a specification question first.
What to do with the used oil and the old filter
Never pour used oil on the ground, down a drain or into the trash. Collect it in a leak-proof container, drain the old filter, and take both to a place that collects used oil. Wash skin that touched used oil with soap and water.
The agencies and makers say the same in their own words. The U.S. Environmental Protection Agency's page for people who change their own oil: "used oil from one oil change can contaminate one million gallons of fresh water — a years' supply for 50 people!" It tells readers to take care not to spill any when they collect it and to put it in a leak-proof can or container, to check with local auto maintenance facilities, waste collectors and government waste officials for a drop-off, and: "Don't forget to drain and recycle used oil filters as well—usually you can drop off the filters at the same collection centers where you deposit used oil." Chevrolet's manual: "If you change your own oil, be sure to drain all the oil from the filter before disposal. Never dispose of oil by putting it in the trash or pouring it on the ground, into sewers, or into streams or bodies of water." Toyota's RAV4 Hybrid: "Do not dispose of used oil and filters in household trash, in sewers or onto the ground." It says to call a dealer, a service station or an auto parts store for information on recycling or disposal. Nissan's warning is the same: dispose of used oil at proper waste facilities and check local regulations.
Where it goes. The EPA's page lists an Earth911 search tool and an American Petroleum Institute collection-site page for finding a place near you. California's recycling agency, CalRecycle, says the options there are a certified collection center, a curbside program in many communities (properly packaged), or a service station that recycles it for you, and, in its section for businesses, that "Certified collection centers (CCC) may set a maximum daily limit of 5 gallons per day." That limit is California's; another state or a retailer may set its own, and a retailer's limit we did not read.
Skin, eyes and fire: the warnings the makers print
Used engine oil is the thing most of these warnings are about. Nissan: "Prolonged and repeated contact with used engine oil may cause skin cancer." Its next sentence says to wash thoroughly with soap or hand cleaner after contact and to keep used oil out of the reach of children. Hyundai's California Proposition 65 warning: "Used engine oil may cause irritation or cancer of the skin if left in contact with the skin for prolonged periods of time." Toyota's RAV4 Hybrid: "Used engine oil contains potentially harmful contaminants which may cause skin disorders such as inflammation and skin cancer, so care should be taken to avoid prolonged and repeated contact." Chevrolet adds clothing: wash or properly dispose of clothing or rags that contain used engine oil.
Gloves and eye protection are the answer to the burn and splash warnings above. FRAM's filter page says to always wear gloves, safety glasses and protective equipment when servicing the vehicle. Mercedes-Benz adds fire: oil that touches hot parts in the engine compartment may ignite, so do not spill it, and if you do, let the engine cool and clean the oil off before you start it.
Warranty and receipts
The manuals are not alike on who should do the change, and they care about what is in the engine and what is written down. Mazda's manual says the change "should be performed by an Authorized Mazda Dealer". Nissan, MINI and Mercedes-Benz recommend a dealer or a qualified shop, as the first section showed, and Hyundai's manual says to have the oil and filter changed by an authorized dealer. Toyota's RAV4 Hybrid manual says its daily general maintenance checks "can be done by yourself or by a Toyota dealer" and, in its dealer section, asks the owner to keep paperwork: "Keep a copy of the repair order. It proves that the maintenance that has been performed is under warranty coverage." Toyota adds: "Please be aware that do-it-yourself maintenance may affect warranty coverage."
Several makers print a caution of that kind. Nissan, in its do-it-yourself section: "incomplete or improper servicing may result in operating difficulties or excessive emissions, and could affect your warranty coverage." Hyundai's Santa Fe manual: "Improper owner maintenance during the warranty period may affect warranty coverage." Mazda is the most specific about records: "As part of this you must keep your maintenance records, receipts, repair orders and any other documents as evidence this maintenance was performed." It says that failing to do so can result in the warranty being voided in whole or in part. We searched the manuals we saved for a statement that a correctly done do-it-yourself oil change voids the warranty and found none, and none says it cannot affect it either. We read no warranty booklet, and the terms for your car are in its own booklet.
What the manuals also print is the damage that is not covered. Nissan: "Operating the engine with an insufficient amount of oil can damage the engine, and such damage is not covered by the warranty." Chevrolet: "Engine oil system flushes are not recommended and could cause engine damage not covered by the vehicle warranty." The practical rule is evidence (our advice, resting on Mazda's and Toyota's request for records). If you change your own oil, keep the receipts for the oil and the filter, and a note of the date, the mileage and the amount you added, with the oil specification printed on the container. We tried to read the Federal Trade Commission's consumer page on this subject; it did not load for us as a saved page, so we do not quote it.
After the change: a light or a noise
A light. The red oil-pressure light is not a reminder: follow the first-start paragraph above word for word. Chevrolet says that a CHANGE ENGINE OIL SOON message that comes back after a reset means the reset did not take; repeat the procedure.
A noise. The makers we read warn that running the engine with too little oil can damage it, so after an oil change a knock, or any noise with the red light on, means: pull over safely and switch the engine off; do not drive on, and have the car towed. For a lighter sound with no light and no knock, check the dipstick and look under the car for a drain plug or filter that is leaking (our advice).
Can a free sound check tell me whether the oil level is right after a change? No. PulsCar's free sound check listens to 30 seconds of an engine that is already running and says what it hears, or says it is inconclusive; it cannot read an oil level, an oil pressure or a torque, and it is no substitute for the dipstick or the red light. The pages we read send the level question to the dipstick or the driver display, and the pressure question to the warning light and a mechanic. It can be used for a different question: whether a sound that is not a knock, and is still there once the level is right, nothing is dripping and the red light is off, gets a result or an inconclusive. For a knock or any red or flashing warning light, do not record: pull over, switch the engine off and do not drive on. For a brake, steering or wheel noise, inspect first.
Four ways a careful person still gets this wrong
The defenses below are ours; the manuals print the facts they rest on.
Trap one: carrying numbers from one car to another. The places the manuals differ (warm or cool drain, the wait before the dipstick, the torque, the capacity) are the places to read your own manual for. A torque printed for a Nissan is a Nissan's torque. The defense: use the number in the manual or workshop manual for your car, and where none is printed, let a shop do the change.
Trap two: the old gasket and the dry gasket. Nissan's caution is about the old gasket left on the engine; FRAM says a double gasket can cause oil leaks and make the filter hard to remove, and that a thin film of oil on the new gasket helps it seal and come off later. The defense: look at the mounting surface before the new filter goes on, and oil the new gasket.
Trap three: trusting the capacity table over the dipstick. Nissan's manual calls its capacity reference only and says to always use the dipstick to determine the proper amount of oil in the engine. Chevrolet says oil above the operating range is harmful to the engine. The defense: add less than the table says, wait the time your manual gives, then add the rest in small amounts.
Trap four: a reset that does not match the oil. Chevrolet says the system will not reset itself and warns not to reset the Oil Life display at any other time than when the oil has just been changed. A reset done to make a light go away, with no change behind it, makes the next reminder wrong. The defense: reset once, at the end of the job, and write the date and mileage down.
Does PulsCar change any of this? No. PulsCar has no view on drain plug torque, filter turns or oil capacity that differs from the manuals quoted on this page. Its free engine sound check listens to 30 seconds of an engine that is already running and cannot see how much oil is in the pan, whether a plug is tight or whether the filter is sealed. The pages we read answer those questions with the dipstick or the driver display, a look under the car and the printed torque (Nissan and Infiniti only), and a shop where the maker says to use one. If the engine knocks after the change, pull over, switch it off, do not drive on and have the car towed; for any other new noise, check the level and look for a leak first, and the free check is for a sound that is still there when the level is right, nothing is dripping and the light is off.
Three composite situations, decoded
These are composite scenarios, not individual customers. They are built only from the manuals and pages quoted above.
Situation one: the Nissan Rogue owner with a driveway. The 2026 Rogue manual prints a do-it-yourself section, so the owner follows it step by step as set out above: stands, drain pan, new washer, filter, the printed 11 to 15 ft-lb for the filter and 22 to 27 ft-lb for the plug, a leak check, a wait of more than 10 minutes and the dipstick, then the Oil Control System reset. The car is on stands before anyone goes under it. The oil goes to a collection point in a leak-proof container, with the drained filter. The Frontier and QX60 pages print a 15-minute wait and 22 to 29 ft-lb for the plug, so a Nissan or Infiniti owner follows their own page.
Situation two: the Mazda or Hyundai owner whose manual says use a dealer. The manual prints no steps and no torque, and says the change should be done by an authorized dealer (Mazda) or to have it done by one (Hyundai). The owner has two honest options: a shop, or a procedure and torque from a source for that car, which this page did not read. If you cannot lift and support the car safely, cannot reach the drain plug and filter, or your manual recommends or tells you to have a dealer or technician change the oil, let a shop do it. After a shop change, the owner asks whether the oil-life reminder was reset, and keeps the receipt, as Mazda's manual requires.
Situation three: the Mercedes-Benz or MINI owner with no dipstick. The level shows on a display after the engine has run for a while: up to 30 minutes of normal driving on the C-Class (longer if driven hard), about 30 minutes of normal driving, or a stationary detailed measurement from the menu, on the Countryman. Both makers recommend a workshop for the change. The owner who does it anyway has no dipstick to read at the end, and the C-Class says too much oil can damage the engine or the catalytic converter and that excess should be removed at a workshop. The plan for this car is the shop.
What we looked for and did not find
- Many of the biggest makers. We did not read the owner's manuals of Honda, Ford, Jeep, Ram, Chrysler, Dodge, Volkswagen, BMW, Volvo or Tesla for this page, and Subaru's manual file came back truncated. "The makers" on this page means the ten we read: Chevrolet, Genesis, Hyundai, Infiniti, Kia (capacity pages only), Mazda, Mercedes-Benz, MINI, Nissan and Toyota. The Hyundai and Kia web pages do not print the model name, so we name them by the code in their addresses.
- Torque outside Nissan and Infiniti. Where the table says none printed, none was found in the owner's manual pages we searched. Workshop manuals were not read.
- Oil makers and other filter makers. We found no readable oil-change article from Valvoline, Pennzoil, Quaker State, Castrol or Mobil 1. We cite two pages from one filter maker, FRAM; K&N's, Purolator's and Mobil's pages answered with a refusal, and WIX's pages we saved had no installation text.
- Jack-stand makers and safety agencies. We read one stand maker's questions and answers, Torin's. We found no usable Harbor Freight page, Race Ramps' pages had no content, a CDC page on jack stands refused our request, and we located no OSHA page on jack stands.
- The Federal Trade Commission's page on routine maintenance and the warranty. It did not load for us as a saved page, so nothing on this page rests on it.
- Retailers. We found no readable AutoZone, O'Reilly or Advance Auto Parts page with used-oil drop-off limits. The only limit on this page is California's.
- No test of our own. We did not change any car's oil or measure any torque. Everything is as printed.
What did we not read for this page, and does PulsCar fill the gap? We did not read the owner's manuals of Honda, Ford, Jeep, Ram, Chrysler, Dodge, Volkswagen, BMW, Volvo or Tesla, and Subaru's file came back truncated. We found no readable oil-change article from the oil makers and no readable AutoZone, O'Reilly or Advance Auto Parts page with drop-off limits. The free sound check says nothing about drain plugs, filters or capacities. If you drive one of those cars, the best use of this page is the list of questions it asks: how long the engine waits before the drain, which torque your manual prints, how much oil goes in with and without a filter, how the reminder is reset and whether the maker wants a dealer to do the change. Your own manual answers them.
Your action plan: before, on the day and after
Before (on a day you are not in a hurry).
- Open your manual to the engine oil, maintenance and capacity pages. Note the capacity with and without a filter, whether a procedure is printed, whether it prints torque, and whether it tells you to use a dealer.
- Decide: if you cannot lift and support the car safely, cannot reach the drain plug and filter, or your manual recommends or tells you to have a dealer or technician change the oil, let a shop do it.
- Get the oil and filter your manual names, a pan that holds the capacity, a new drain plug washer, jack stands rated for your car and a leak-proof container for the used oil. Find the place that will take the used oil and filter before you drain anything.
On the day.
- Never get under a car held up only by a jack. Put jack stands under the lift points your owner's manual shows, on hard, level ground with the parking brake on, before any part of you goes under it.
- Hot oil, a hot drain plug, a hot filter and hot exhaust parts burn. Wear gloves and eye protection and give the engine the time your manual gives to cool before you reach under the car.
- Drain, replace the washer, change the filter (look for the old gasket, oil the new one), tighten to the torque your manual prints, refill in stages and check the dipstick.
- Add oil in small amounts and check the level each time. Too much oil can damage the engine as well as too little, so the level belongs between the marks, never above the top one.
- Never pour used oil on the ground, down a drain or into the trash. Collect it in a leak-proof container, drain the old filter, and take both to a place that collects used oil. Wash skin that touched used oil with soap and water.
After.
- After the first start, look for a drip at the drain plug and the filter. If the red oil-pressure light stays on, flickers or comes on while driving, or the engine knocks, pull over safely and switch the engine off; do not drive on. If the engine knocked, have the car towed. Otherwise check the dipstick once the oil has drained back; if the level was low, add oil as your manual says; if the level was not low, or the light stays on or comes back, have the car towed. If your manual tells you to call a dealer for this light, do that instead of adding oil.
- Recheck the level on level ground after the wait your manual gives, and reset the oil-life reminder as your manual says.
- Write down the date, the mileage and the amount of oil, and keep the receipts.
Sources and documents
The facts on this page come from the pages below, read on 11 and 12 November 2026 and saved as text, except where a date is given; advice marked as ours is ours. Quotes are as printed.
- Chevrolet: Silverado 1500 2025; Equinox 2026; Equinox EV 2026
- Hyundai: Santa Fe 2023; Tucson Hybrid 2022; lubricants page, code LX3, 2026
- Genesis: GV70 2023
- Kia: lubricants page, code SK3, 2024; lubricants page, code MQ4KH, 2023
- Nissan and Infiniti: Rogue 2026; Frontier 2023; Infiniti QX60 2025
- Mazda: CX-5 2021
- Toyota: RAV4 Hybrid 2021
- Mercedes-Benz: C-Class 2022 operator's manual
- MINI (BMW Group): Countryman 2025
- Government and state: U.S. Environmental Protection Agency, managing, reusing and recycling used oil; CalRecycle, used oil recycling program
- Filter and stand makers: FRAM, how to change your oil filter and oil filter is stuck; Torin, garage tools questions and answers (a jack and jack-stand maker; one maker's view)
- Not read, or read and not usable, not quoted: Honda, Ford, Jeep, Ram, Chrysler, Dodge, Volkswagen, BMW, Volvo and Tesla owner's manuals (not read); Subaru's manual (truncated file); Valvoline, Pennzoil, Quaker State, Castrol and Mobil 1 pages (no readable oil-change article); K&N, Purolator and Mobil pages (refused); Harbor Freight, AutoZone, O'Reilly and Advance Auto Parts (no usable page found); WIX (no installation text); a Federal Trade Commission page (did not load as a saved page)
Prices verified: this page prints no prices. Technical documents verified 11 and 12 November 2026: owner's manuals, maker pages, federal and state pages. Written by PulsCar, which makes the free sound check.

