Your owner's manual for your engine and model year decides three things: the viscosity grade (for example SAE 0W-20), the oil specification it must meet (API SP, ILSAC GF-6, dexos1 and so on) and the quantity. Look in its chapter on lubricants and capacities, maintenance data or specifications. The makers we read word the same three things differently, and the answer can change with the engine, the market and the temperature, which is why a make-and-model chart is only a pointer. If the manual lists several oils, use the rule it prints, never "close enough": Nissan says damage caused by oil other than as recommended is not covered under its New Vehicle Limited Warranty, GM says failing to use the recommended oil or equivalent can result in engine damage not covered by the vehicle warranty, and Hyundai says oil of any other viscosity may result in engine damage. Add oil as your manual says and read the dipstick as it says. If the red oil pressure light comes on while you drive, go straight to the section on the red oil pressure light.
This page answers one question: which engine oil your car takes (the viscosity grade, the specification and the quarts), where to look it up and what to do when the answer is not a single line. It does not repeat what an oil change costs (see the oil change cost guide), the steps of an oil change (see how to change oil), the difference between synthetic and conventional oil and how often each is changed (see synthetic versus conventional oil), why oil appears under a car (see oil leak from car) or why the red oil light comes on (see the low oil pressure warning guide).
PulsCar publishes this guide; no link on this page is an affiliate link and we sell no oil. We do not test or rank oils, so there is no "best oil" here. The page shows what the eight makers we read print in their own owner's manuals and what the standards bodies say, and tells you where your own answer lives.
Every figure below names its source; we read each on 11 November 2026. Where a page carried a last-updated or edit date we give it in the sources list, and where it did not name the model year we say so. A maker's owner's manual is a maker's statement about its own engines, and we quote it as exactly that.
What the three parts of an oil answer mean
An oil answer has three parts, and all three are needed to name the right oil.
The first is the viscosity grade, such as SAE 0W-16, 0W-20 or 5W-30. Toyota's owner's manual page for the RAV4 Hybrid explains the label itself: "The 0W in 0W-16 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather." It continues: "The 16 in 0W-16 indicates the viscosity characteristic of the oil when the oil is at high temperature." Hyundai's 2023 Tucson manual adds the trade-off in its own words: lower viscosity engine oils can provide better fuel economy and cold weather performance, while higher viscosity oils are required for satisfactory lubrication in hot weather, and "Using oils of any viscosity other than those recommended may result in engine damage." Subaru says synthetic oil must be of "the same classification, viscosity and grade shown in this Owner’s Manual": the grade is only one of the things that must match.
The second is the specification, the quality mark the oil must carry. The manuals we read name several: API SN PLUS or SP, or ILSAC GF-6 (Hyundai, Kia), API SN, SN PLUS or SP, or ILSAC GF-5 or GF-6A (Subaru), the API or ILSAC mark with "0W-20 SP" (Nissan), GM's own dexos1 (GM's approval, shown by a logo on the bottle), Toyota's API SN/RC and Mazda's API mark for gasoline engines. The American Petroleum Institute says the API marks belong to a voluntary licensing and certification program for engine oil marketers. The section on specifications below shows each maker's words.
The third is the quantity: the capacity of the engine's oil system, with or without an oil filter change, which several makers call approximate, a reference or a guideline. The section on quarts shows the printed figures side by side.
An oil container also carries a label. Toyota says the API registered mark is added to some oil containers to help you select the oil you should use. Nissan says to select only engine oils that meet the American Petroleum Institute (API) certification or International Lubricant Standardization and Approval Committee (ILSAC) certification and the SAE viscosity standard, and that oils which do not carry the specified quality label should not be used because they could cause engine damage.
Where to find the answer for your car, and why a chart is only a pointer
The answer lives in the owner's manual for your exact car. The makers we read put the oil in different places: usually a lubricants-and-capacities or specifications chapter, sometimes also a maintenance or engine-oil section, and each names them differently. The list is not complete, but it shows what to look for.
If you only have a paper manual, look for those words in the index. If you have lost it, the makers' own pages help, with one catch about the VIN.
How the maker's own pages let you find your manual
Three makers' pages we read describe how to find the manual for your car, and they do not work the same way.
Toyota's owner page invites you to "Select A Vehicle" and says "Select your Toyota so we can personalize your ownership experience." It also tells you where to find the VIN, in four places. "You can find your VIN on the insurance identification card issued by your insurance company." "You can find your VIN on the vehicle registration card issued by the Department of Motor Vehicles." "You can find your VIN on a metal plate on your dashboard, near the windshield on the driver’s side." "You can find your VIN on a label on the driver-side doorjamb."
Chevrolet's page works by year, make and model, and says so plainly: "At this time, you cannot search by Vehicle Identification Number (VIN). However, using your vehicle’s year, make and model should bring up the correct owner’s manual." It adds that the owner's manual can also be explored in the vehicle infotainment system or the mobile app, or downloaded as a free PDF.
Nissan's page says "Select a Model and Year to find your vehicles manuals & guides." and describes a digital owner's manual in the vehicle's infotainment screen with voice-to-text search.
So the two facts you need on you are the model year and your engine: the manual may print different oil for different engines in the same model, as the next sections show. If a page asks for the VIN, the four places Toyota lists are a good checklist for any maker.
What a maker's own booklet says: "refer to your Owner's Manual"
Even a maker's maintenance booklet sends you to the owner's manual for the oil grade. Toyota's 2025 Warranty and Maintenance Guide for the Camry says: "Please refer to your Owner’s Manual for the specific oil viscosity rating recommended for your vehicle/engine type." Nissan's 2025 Rogue manual does the same inside one book, sending you from its maintenance list to its own capacities table.
The oil filler cap and the dipstick: what the manuals say and do not say
The manuals we read show where the oil filler cap is, and say little more. GM's engine compartment overview lists "Engine Oil Fill Cap" and "Engine Oil Dipstick" with page references, Nissan's Altima list names "Engine oil filler cap (P. 450)" and "Engine oil dipstick (P. 450)", Subaru's lists "Engine oil filler cap (page 426)", and Hyundai's index lists "Engine oil filler cap". None of the pages we read says that the viscosity grade is printed on the cap or on a sticker, so use any cap marking as a clue that should match the manual, not as the answer, and let a dealer settle a difference with your VIN.
Check that the manual is the right one
A manual is only right if it matches the car in front of you. The documents tell you how specific they are.
The Subaru manual we read (MSA5M2208A) covers a hybrid and is printed for North America (its page footers read 北米Model, Japanese for North American model). The Chevrolet Silverado 1500 manual carries, in its page footer, "GMNA-Localizing-U.S./Canada/Mexico/Paraguay" and prints a different oil for different engines. Kia's online manuals are published per model code, model year and region: the NQ5 page we read is the "en_RG" edition; it lists oil by country group and does not name the US, so we do not treat it as the US edition.
A manual for the wrong year, engine or country can print the wrong answer with total confidence. The three checks that matter are the model year, the engine (ask the dealer, quoting your VIN, if the manual lists several) and the market (US, Canada, or elsewhere).
The same question in eight makers' own words, side by side
Start with the printed answers, because they do not match, and the differences are the point. Each row is what one document says for one engine, in its own words, with the quantity as printed. We do not average anything and we do not say any row applies to your car: only your manual does.
Four things stand out. The grade is not the same across makers or even across engines of one model (SAE 0W-16 on one Toyota page, 5W-30 for one GM engine and for Mazda's CX-50 2.5T, 0W-20 for the rest). Quantities run from just over four quarts to eight, from cars to pickups. The specification is named three ways (API and ILSAC marks, GM's "dexos1", a maker's own brand with an "equivalent" clause). And even inside one manual the answer depends on the engine.
Subaru's row is printed under its "Alternative engine oil" heading; the "Approved engine oil" paragraph above it says to always use the SUBARU approved oil and to contact the dealer. Treat it as how Subaru words its fallback, not as a row for any particular Subaru. We do not know your car, so this table is not a lookup, and some makers we could not read at all (see the section on what we could not read). Treat it as a map of how makers word the answer.
What oil does my car take, and who decides? In the owner's manuals PulsCar read for this guide on 11 November 2026, the maker decides, engine by engine, and prints three things: a viscosity grade such as SAE 0W-20, a specification such as API SN PLUS/SP, ILSAC GF-6 or GM's dexos1, and a capacity, which several makers call approximate, a reference or a guideline. Toyota's RAV4 Hybrid page prints SAE 0W-16 and 4.8 US quarts with the filter, a 2025 Nissan Altima manual recommends 0W-20 SP and 5-1/2 quarts, and the 2026 Chevrolet Silverado manual prints SAE 0W-20 and 8.0 quarts for its V8 engines but SAE 5W-30 and 6.0 quarts for its 2.7L engine. A chart that does not name your engine, model year and country is only a pointer to the manual. This guide does not rank oils or sell any, and it reads documents rather than testing products.
Viscosity grade: the first choice, the stand-in and the cold-weather exception
A viscosity answer is rarely one number in the documents we read. It is a first choice, sometimes a stand-in for when the first choice is not on the shelf, and sometimes a temperature rule.
Toyota's RAV4 Hybrid page gives both: "SAE 0W-16 is the best choice for good fuel economy and good starting in cold weather." and "If SAE 0W-16 is not available, SAE 0W-20 oil may be used. However, it must be replaced with SAE 0W-16 at the next oil change." The stand-in is temporary, and the page says when it must be undone.
Subaru's hybrid manual prints the same logic with a different pair: "If 0W-20 synthetic oil is not available, 5W-30 conventional oil may be used if replenishment is needed but should be changed to 0W-20 synthetic oil at the next oil change." The manual's word is "replenishment" and it does not say whether that includes a full oil change, so ask the dealer before using the stand-in for more than a top-up.
GM prints a temperature rule instead: "Cold Temperature Operation: In an area of extreme cold, where the temperature falls below −29 °C (−20 °F), an SAE 0W-30 oil may be used." It adds that oil of this grade "will provide easier cold starting for the engine at extremely low temperatures."
Hyundai prints a chart. Its Tucson manual says: "When choosing an oil, consider the range of temperature your vehicle is operated in before the next oil change. Proceed to select the recommended oil viscosity from the chart." For the 2.5 Smartstream engine the chart shows a single entry, 0W-20, across the whole temperature scale. We read one Hyundai engine only, so we cannot say how its chart looks for other engines. A make-and-model table found on a website may not carry rules like these.
Nissan's Altima manual prints one recommended oil and a conditional alternative: "If the above motor oil (or engine oil) is not available, a synthetic 0W-20 GF-6A SP motor oil (or engine oil) may be used."
None of the pages we read offers "thicker is safer" as a general rule. Toyota's page says an oil with a higher viscosity "may be better suited if the vehicle is operated at high speeds, or under extreme load conditions", which is a condition, not a general rule. Subaru and Hyundai say why viscosity matters. Subaru says "Oils of lower viscosity provide better fuel economy. However, in hot weather, oil of higher viscosity is required to properly lubricate the engine." It also lists "The incorrect oil viscosity is used." among the conditions that can increase oil consumption. These are explanations, not permission to go thicker: the grade printed for your engine still applies (Hyundai's chart for the 2023 Tucson shows 0W-20 across the whole scale), and a stand-in is only for the case and the time the manual names.
Specification: API, ILSAC, dexos1 and the maker's own brand
The second part of the answer is the specification, which is separate from the grade. The documents name it differently, and the words are worth reading closely.
The marks themselves are not the maker's invention. The American Petroleum Institute says its Engine Oil Licensing and Certification System is a voluntary licensing and certification program that authorizes engine oil marketers that meet specified requirements to use the API Engine Oil Quality Marks. In other words, a mark on a bottle is for marketers the program has licensed, so look for it on the container. Hyundai's manual connects the API mark to the second body: "An engine oil displaying this API Certification Mark conforms to the international Lubricant Specification Advisory Committee (ILSAC). It is recommended to only use engine oils that uphold this API Certification Mark."
None of the documents we read says that one oil brand is better than another. Four of them show another company's logo beside the word "Recommends" in the engine-oil row: Hyundai's 2022 and 2023 Tucson manuals (a Quaker State logo) and Kia's SK3 page and general-region NQ5 page (a TotalEnergies logo). GM's table says "ACDelco dexos1 full synthetic is recommended", and Nissan, Toyota and Mazda name their own genuine oil (Nissan and Toyota with an "equivalent" clause). This page gives no brand ranking. If a shop offers a different oil, the question to ask is whether it carries the specification your manual prints for your engine, and what grade it is.
What API's own pages add: newer gasoline marks, and where diesel is different
The American Petroleum Institute's page on oil categories opens its charts with a pointer to the manual: "Vehicle owners should refer to their owner's manuals before consulting these charts." For gasoline engines it then says that "the latest engine oil service category includes the performance properties of each earlier category" and gives an example: "If an automotive owner's manual calls for an API SN oil, an API SP oil will provide full protection." Its table lists SP as current, introduced in May 2020, and ILSAC GF-6A as current, with GF-5 obsolete; it says GF-6B applies only to oils of SAE viscosity grade 0W-16. One API page (latest oil categories) describes the marks on a container: ILSAC GF-6A oils may be licensed to display the "Starburst", GF-6B oils the "Shield", and API Service SP may be licensed for use in the upper portion of the API Service Symbol "Donut", with "Resource Conserving" in the lower portion for oils that meet those requirements. A separate API page (latest oil classifications) says marketers with licensed SN PLUS oils may use SN PLUS in the lower half of the Donut.
Two cautions. First, the manual still comes first: Mazda's wording is "Only use" oil certified for gasoline engines, and Hyundai's table names SN PLUS or SP. Second, the sources we read do not show the same date. The API oil-categories page we read on 11 November 2026 still lists SP and ILSAC GF-6A as current and does not mention SQ or GF-7. Chevron's Havoline page says "ILSAC GF-7 is the latest engine oil specification developed by ILSAC", that "The first license date for the new standards is March 31, 2025." and that GF-7/API SQ oils are backwards compatible with GF-6/SP; our guide on synthetic versus conventional oil quotes API's own 2025 Motor Oil Guide listing SQ as current. API's own sentence applies either way: the latest gasoline category includes the properties of each earlier one, so a newer mark covers an older one your manual names. The mark your manual names is still the one to check for.
Diesel is different. API's page says that for diesel engines "the latest category usually - but not always - includes the performance properties of an earlier category." and that "API FA-4 oils are not interchangeable or backward compatible with API CK-4, CJ-4, CI-4 PLUS, CI-4, and CH-4 oils." It adds that you should refer to the engine manufacturer's recommendations to determine if API FA-4 oils are suitable. For a diesel, the manual's own page is the only starting point.
When your manual lists more than one oil
A manual that lists several oils is not contradicting itself: it is telling you that the answer depends on something. The documents we read use six kinds of rule. Find which one yours uses before you buy anything.
The rule for you is simple to state and easy to skip. First, find the line that matches your engine, year and market. Second, if the manual names a stand-in, note the condition attached to it (not available, replenishment, extreme cold) and the moment it must end (the next oil change). Third, if the manual does not say which line applies to your car, do not choose the one you like: ask the dealer, quoting your VIN, which oil your car takes.
Which line applies when my manual lists several oils? PulsCar found six kinds of rule in the manuals it read: the oil depends on the engine (GM), on the market (a Kia general-region edition), on temperature (GM below minus 20 degrees Fahrenheit, a Hyundai chart), on a first choice with a temporary stand-in (Toyota's 0W-20 in place of 0W-16, Subaru's 5W-30), on a genuine-or-equivalent clause (Nissan, Toyota), or on whether a diesel has a particulate filter (the diesel line of a Kia general-region edition). Each document names the condition; Toyota and Subaru also say when a stand-in ends, at the next oil change. Every stand-in is named and conditional; none of the pages read offers a general "any oil will do" rule. If the manual does not say which line is yours, ask the dealer, quoting your VIN, which oil your car takes.
How many quarts: the printed capacity, with and without the filter
Capacity is the volume the engine's oil system takes at an oil change. Several makers call the figure approximate, a reference or a guideline, and several print it two ways.
Toyota's page prints both: "Oil capacity (Drain and refill reference) With filter 4.8 qt. (4.5 L, 4.0 Imp. qt.) Without filter 4.4 qt. (4.2 L, 3.7 Imp. qt.)"* and then explains its asterisk: "The engine oil capacity is a reference quantity to be used when changing the engine oil." It adds: "Warm up and turn off the hybrid system, wait more than 5 minutes, and check the oil level on the dipstick." Nissan says: "The following are approximate capacities. The actual refill capacities may be slightly different." Subaru says: "Each quantity indicated here is only a guideline. The necessary quantity for replacement may differ slightly depending on the temperature and other factors."
Three details in those documents are easy to miss. First, the Nissan tables print three units, metric, US and Imperial, and the figures differ: the Altima's 5-1/2 US quarts is printed beside 4-5/8 Imperial quarts. A quart is not the same size everywhere, so read the line for US measure if you buy oil in US quarts. Second, "with filter" and "without filter" differ by a fraction of a quart in these documents (0.4 qt for Toyota, a quarter quart for two of the Nissans), so use the with-filter line when the filter is changed. Third, Hyundai and Kia label theirs "drain and refill" and do not say, in the lines we read, whether the filter is included. The figure is a drain-and-refill figure. It is not an amount to pour in unchecked: it is where you start before you read the dipstick.
Checking the level: the waiting rules differ by maker
The reason "how much oil" cannot be answered with a number alone is that the dipstick, not the printed capacity, has the last word. Most of the manuals we read point to the dipstick for the final reading (Mazda's CX-90 manuals use the center display instead), and they differ on how long to wait. Each quoted wording below is that maker's own.
These are different procedures, and Nissan and Infiniti print different waits inside a single manual: more than 10 minutes in the steps for checking the level, but 15 in the oil-change steps and, for the Altima, the Frontier and the Infiniti models, also in the maintenance list. Five of them (Toyota, Nissan, Infiniti, Hyundai and Mazda) start from a warm engine; GM says accuracy improves when checking a cold engine before starting, and warns that checking too soon after shutoff can give incorrect readings. Two Mazda manuals take a different route altogether. The CX-90 and CX-90 PHEV manuals say "Use center display screen indication to inspect the engine oil level." and walk through the vehicle status monitor; the hybrid manual notes that the engine starts for the measurement, and both manuals say not to press the accelerator during it. Infiniti's manuals call the printed figure a reference and add: "Always use the dipstick to determine the proper amount of oil in the engine." The practical consequence is that reading the level the wrong way can send you to add oil you do not need, which brings us to overfilling.
Oil and engine parts can be hot enough to burn you: wait as your manual says before you check the level, and use a cloth or glove on a hot dipstick handle. GM's manual puts it this way: "The engine oil dipstick handle may be hot; it could burn you. Use a towel or glove to touch the dipstick handle."
If the red oil pressure light comes on
If the red oil pressure light comes on while you drive, stop in a safe place and switch the engine off: driving with low oil pressure can damage the engine. Check the oil level once it is safe to do so, and then follow your own manual: Mazda, Nissan, Infiniti and Subaru say to contact their dealer and not to run the engine with the light on, and GM says that if the light stays on for more than 10 seconds after a restart you should switch off, not restart and see your dealer (the light shows briefly at start-up, which is normal). Our advice, not a maker's: if you are unsure, do not restart the engine; have the car towed. GM's manual also says to add oil if the level is below the normal operating range. A low-oil-level message is a different signal: GM says that if a low oil message displays on its driver information center, you check the oil level.
Adding oil, and what makers say about too much
When the level is low, the manuals say what to add and how much. GM: "If the oil is below the cross-hatched area at the tip of the dipstick and the engine has been off for at least 15 minutes, add 1 L (1 qt) of the recommended oil and then recheck the level." Subaru says that from the low mark to the full mark is approximately 1.1 US qt (1.0 liter), and that after pouring "you must use the level gauge to confirm that the oil level is correct." Hyundai says: "If the oil level is below the L, add enough oil to bring the level to F. Use only the specified engine oil." Nissan: if the level is below the L mark, remove the oil filler cap and pour the recommended oil, and says not to fill the oil level above the H (High) mark.
Too much is as much a problem as too little. GM's caution reads: "Oil levels above or below the acceptable operating range shown on the dipstick are harmful to the engine." It says that if the level is above the operating range the engine could be damaged, and tells you to drain the excess oil or limit driving the vehicle and to seek a service professional to remove it. Subaru's note says: "To prevent overfilling the engine oil, do not add any additional oil above the upper level when the engine is cold."
Nissan says "It is normal to add some oil between oil maintenance intervals or during the break-in period, depending on the severity of operating conditions." and Hyundai says engine oil consumption while driving is normal and it is necessary to check and refill the engine oil regularly. How much use is normal is a separate topic, covered in our oil change cost guide alongside the thresholds some makers publish.
How much oil does my car need, and how do I know I added the right amount? PulsCar compared the capacities printed in the manuals it read: from 4.23 US quarts in Kia's SK3 manual and 4.4 with the filter in Subaru's hybrid manual, through 4.8 on Toyota's RAV4 Hybrid page and 5-1/2 for a 2025 Nissan Altima, to 6.13 for a 2023 Hyundai Tucson and up to 8.0 for the Silverado's V8 engines. Several makers call the figure approximate, a reference or a guideline, and the dipstick has the last word. The waiting time before reading it differs by maker, from at least 5 minutes (Subaru) to 15 minutes (Hyundai) and two hours cold (GM), and GM, Nissan and Subaru warn against adding oil above the upper level. Your own manual's figure and procedure are the ones to use.
Hybrid, turbo and diesel engines: what the pages we read print
The question "does my kind of engine need a different oil?" has no general answer in the documents we read. Each maker prints the oil per engine, so the rule is the same as everywhere else on this page: find your engine's line. What we can show is how the lines look for these engine types.
Hybrids. Toyota's RAV4 Hybrid page prints SAE 0W-16 with API SN/RC, and its level-check note says to "Warm up and turn off the hybrid system" before waiting and reading the dipstick. Subaru's hybrid manual, after its SUBARU approved oil, prints 0W-20 synthetic as the required alternative oil, and its level check is the ordinary ignition-off check (wait at least 5 minutes). Mazda's 2025 CX-90 PHEV manual prints "Use SAE 0W-20 engine oil." and reads the level on the center display, with the hybrid system started. In all three documents the hybrid's engine has its own oil line like any other engine; the Toyota and Mazda PHEV level checks mention the hybrid system, Subaru's does not.
Turbocharged engines. Mazda's CX-50 manual is the clearest: one model, two engines, two grades (SAE 0W-20 for the SKYACTIV-G 2.5, SAE 5W-30 for the 2.5T), and a section on the turbocharger that says "Use only recommended engine oil" and "Extra additives are NOT recommended." It also says that after driving at freeway speeds, up a long hill or towing for a long time you should "idle the engine at least 30 seconds before stopping it", because "Otherwise, the turbocharger could be damaged." The same caution adds that when i-stop operates, idling is unnecessary.
Infiniti's 2025 QX80 manual says "The turbocharger system uses engine oil for lubrication and cooling of its rotating components." and "A sudden interruption of oil supply may cause a malfunction in the turbocharger." Its cautions are to change the oil at the recommended intervals, to "Use only the recommended engine oil." and to let the engine idle for a few minutes after extended high revs. Yet the oil it recommends for the QX80, QX50 and QX60 is the same 0W-20 SP text, so a turbo does not mean a different grade at Infiniti.
Kia's 2024 NQ5 manual (general-region edition) lists an engine it calls Smartstream G1.6 T-GDi at 4.8 liters with the same grade and specification as its 2.0 and 2.5 engines outside the listed markets (for those two engines the list also includes India): "SAE 0W-20, API SN PLUS/SP or ILSAC GF-6". GM's 2.7L Silverado engine gets SAE 5W-30 while its V8 engines get SAE 0W-20. The pattern in these documents: each engine has its own line, and where a turbocharger is mentioned, the maker's rule is to use the recommended oil and change it on schedule.
Diesels. The only diesel oil specification in the manuals we read for this page is Kia's, and it is for a general-region edition, not the US one (our guide on synthetic versus conventional oil quotes a Mazda diesel entry from a 2021 US manual): for the Smartstream D2.0 diesel it prints a capacity of 5.6 liters and "ACEA C5, C2 or C3 (with DPF)" or "ACEA A3 or B4 (without DPF)". GM's gasoline Silverado manual sends diesel owners elsewhere: "If the vehicle has a diesel engine, see “Recommended Fluids and Lubricants” in the Duramax diesel supplement." We did not read that supplement, so this page says nothing about Duramax oil. Do not assume that the oil for a gasoline engine is right for a diesel: a diesel owner needs the diesel's own page of the manual.
Model year and country: two documents that look alike and are not
Two cases from our reading show why the model year and the country edition matter.
The Hyundai Tucson manuals for 2022 and 2023 print the same grade and quantity for the 2.5-liter engine: SAE 0W-20 and 6.13 US quarts. The footnote wording changed. The 2022 manual's footnote to the capacity table says "Requires API Latest (or ILSAC Latest) Full synthetic grade engine oil." (the classification column of that table already prints "API SN PLUS/SP or ILSAC GF-6", and the footnote to the viscosity chart says "API SN PLUS (or above)"). The 2023 footnote to the same table says "Requires API SN PLUS (or above) Full synthetic grade engine oil." The two documents are not word-for-word the same even where the numbers are, so use the manual for your own model year.
Kia's NQ5 page, 2024, a general-region edition rather than the US one, shows the other kind of difference. It prints one oil for the 1.6 turbo engine outside a listed group of markets and another ("SAE 5W-30, ACEA A5/B5") for a listed group of other markets. Mazda's 2025 CX-90 manual does the same by country: "Use SAE 0W-20 engine oil." under "U.S.A., Canada", and "Except U.S.A., Canada Use SAE 5W-30 engine oil." A manual from the wrong region edition is the wrong manual, even if the model and year match.
What makers say about the wrong oil
The consequences of wrong oil are printed in plain words, and they are mostly about the engine and about who pays.
GM's caution about oil: "Failure to use the recommended engine oil or equivalent can result in engine damage not covered by the vehicle warranty." Nissan: "Damage caused by the use of motor oil (or engine oil) other than as recommended is not covered under NISSAN’s New Vehicle Limited Warranty." Hyundai, about viscosity: "Using oils of any viscosity other than those recommended may result in engine damage." Infiniti: "Damage caused by the use of motor oil (or engine oil) other than as recommended is not covered under INFINITI’s New Vehicle Limited Warranty." Subaru prints an instruction, "Use only engine oil with the recommended grade and viscosity.", and elsewhere lists the incorrect oil viscosity among the conditions that can increase oil consumption; it prints no damage or warranty sentence about it. Mazda's pages print no warranty sentence about wrong oil in the sections we read; they warn instead that "Do not overfill the engine oil. This may cause engine damage."
Hyundai, and Kia's general-region NQ5 edition (not the US one), also print a consequence short of damage: if a lower-grade oil (mineral type, semi-synthetic or a lower specification) is used, Hyundai says to "replace the engine oil and engine oil filter as indicated in maintenance under severe usage conditions." In other words, the manual ties a lower-grade oil to the more frequent schedule.
Additives, flushes and mixing
GM puts it bluntly: "Do not add anything to the oil. The recommended oils meeting the dexos1 specification are all that is needed for good performance and engine protection." On flushes: "Engine oil system flushes are not recommended and could cause engine damage not covered by the vehicle warranty." Nissan: "NISSAN does not recommend the use of oil additives. The use of an oil additive is not necessary when the proper oil type is used and maintenance intervals are followed." Infiniti's 2025 QX50 manual has the same sentence with INFINITI's name, and Mazda's turbo section says "Extra additives are NOT recommended."
None of the manuals we read for this page gives a rule on mixing brands or types of engine oil (the Rogue's fluids table says "Never mix different types of fluids" beside its brake-fluid line, which is not an engine-oil rule). Another Subaru manual, quoted in our guide on synthetic versus conventional oil, allows different brands of the same classification and viscosity when adding oil. Subaru's note on synthetic oil comes closest: it says that when using synthetic oil you must use oil of the same classification, viscosity and grade shown in its manual. If your manual says nothing about mixing, our advice is to top up with the oil it names.
What we could not read
A guide like this should say what it could not see. We read the oil sections, and the warning-light and additive notes, of the owner's manuals of GM (Chevrolet), Subaru, Hyundai, Nissan, Mazda and Infiniti, one maintenance-data page from Toyota and one lubricants page from each Kia manual, on 11 November 2026 (for Infiniti's QX60 we used the capacity table and the oil recommendation). (Infiniti's oil pages repeat Nissan's wording, so they confirm a pattern more than they add a second opinion.) We could not open Honda's, Ford's or Acura's owner's manual pages, or Toyota's 2023 Warranty and Maintenance Guide, so we used the 2025 one. For this page we could not read the manual lookups of Volkswagen, BMW, Mercedes-Benz, Lexus, Mitsubishi and Genesis, we found no Jeep, Ram, Chrysler or Dodge manual we could read, and we could not open the Volvo or Audi manual pages. We did not read the GM Duramax diesel supplement.
So nothing on this page describes Honda, Acura, Ford, Volkswagen, Audi, BMW, Mercedes-Benz, Lexus, Mitsubishi, Genesis, Volvo or Stellantis oil, and we do not infer it from other makers. If you drive one, the owner's manual is still the answer, and your maker's dealer can tell you the oil for your VIN.
At the counter or the shop: what to say, and what a good answer sounds like
This is our advice, built on what the makers print above. It costs nothing, and it works whether you buy oil yourself or a shop buys it for you.
Say the three parts out loud: not "synthetic, the usual", but the grade, the specification and the quantity from your manual. For example, "0W-20, API SP, five quarts with the filter" (use the grade, mark and quantity your manual prints). If your manual says "dexos1", the oil should say it. If it says "API SN PLUS/SP or ILSAC GF-6", the container should carry those marks.
Ask which line of your manual the oil satisfies. Nissan and Toyota write "or equivalent", and Toyota says what the equivalent is for: to satisfy the grade and viscosity the page prints. If a shop cannot say which line the oil satisfies, ask to see the container or the invoice line with the grade and the mark.
Three composite situations
These are composite scenarios, not individual customers. Each is built only from the documents above and shows how the answer plays out.
Situation one: a stand-in on the shelf. A RAV4 Hybrid owner arrives for an oil change and the shop has no 0W-16. The manual page says 0W-20 may be used if 0W-16 is not available, but that it must be replaced with 0W-16 at the next oil change. The owner agrees to 0W-20 this once and writes the condition on the receipt: back to 0W-16 at the next change. The risk is not the first change; it is that the note is forgotten and the stand-in becomes the habit.
Situation two: two trucks, one badge. Two neighbours own Silverados. One has a V8, the other the 2.7L engine. The manual prints SAE 0W-20 and 8.0 quarts with the filter for the V8 engines, and SAE 5W-30 and 6.0 quarts for the 2.7L. When one asks the other what to buy, "the same as mine" would put the wrong grade in one of the trucks. The sentence that settles it is the one that names the engine.
Situation three: a manual from the wrong country. A driver who moved abroad finds an online Kia manual for the same model code and year. It prints one oil for the 1.6 T-GDi engine outside a listed group of markets and another for that group, and the driver reads the first. The fix is to find the edition for their market and ask the dealer, quoting the VIN.
Used oil and the old filter
An oil change leaves oil that must go somewhere. GM's manual says: "Never dispose of oil by putting it in the trash or pouring it on the ground, into sewers, or into streams or bodies of water. Recycle it by taking it to a place that collects used oil." The US Environmental Protection Agency's page says to "Check with local automobile maintenance facilities, waste collectors, and government waste officials to find out when and where you can drop off your used oil for recycling." and "Don’t forget to drain and recycle used oil filters as well—usually you can drop off the filters at the same collection centers where you deposit used oil." The EPA says a single oil change's used oil can contaminate one million gallons of fresh water. Never pour used oil on the ground or down a drain: take it, and the drained filter, to a place that collects used oil. If a shop changes your oil, you can ask where the old oil and filter go; if you do it yourself, the steps are in our guide on how to change oil.
Your action plan
- Find the owner's manual for your exact car: your model year, your engine and your market. If you have lost it, use the maker's owner page: Toyota's lets you select a vehicle and lists where the VIN is; Chevrolet's works by year, make and model and says it cannot search by VIN; Nissan's asks for model and year.
- Open the chapter called lubricants and capacities, maintenance data or specifications. Write down three things: the viscosity grade, the specification, and the capacity with the filter.
- If it lists several oils, find the rule: engine, market, temperature, a first choice with a stand-in, a "genuine or equivalent" clause, or the diesel's particulate filter. If it does not say which applies to you, ask the dealer with your VIN.
- Buy or accept only oil whose container carries that grade and specification. Do not treat a chart on a website as a substitute for the manual.
- Read the dipstick the way your manual says: the waits printed in the makers' documents run from 5 minutes to 15 minutes, and up to two hours for GM's cold check (see the table above), and some Mazda models read the level on the center display. Oil and engine parts can be hot enough to burn you: wait as your manual says before you check the level, and use a cloth or glove on a hot dipstick handle.
- If the red oil pressure light comes on while you drive, stop in a safe place and switch the engine off: driving with low oil pressure can damage the engine. Check the oil level once it is safe to do so, and then follow your own manual: Mazda, Nissan, Infiniti and Subaru say to contact their dealer and not to run the engine with the light on, and GM says that if the light stays on for more than 10 seconds after a restart you should switch off, not restart and see your dealer (the light shows briefly at start-up, which is normal). Our advice, not a maker's: if you are unsure, do not restart the engine; have the car towed.
- Keep a note of the grade, specification and quantity that went in.
What this page cannot tell you
It cannot tell you the oil for your car. Only the manual for your engine, model year and country, or your maker's dealer with your VIN, can. We read pages of owner's manuals from eight brands (Infiniti shares Nissan's wording) and could not read many others, so a large share of makes, models and years is simply not here. We did not test oils, do not rank them and make no claim about which brand or type is better. We did not look at what oil costs or how often to change it: our guides on oil change cost, how to change oil and synthetic versus conventional oil cover those questions. Finally, an owner's manual is the maker's statement about its own engines: where a manual and a general chart disagree, we have no way of settling it from outside, and the maker is the party to ask.
Sources and documents
Each page below was read on 11 November 2026. Where a page carried no date or did not name the model year, we say so.
- Toyota, digital owner's manual, Maintenance data (fuel, oil level, etc.), RAV4 Hybrid, 2020 model year (the page's metadata reads "Toyota 2020 RAV4 HV from Jun. 2020 Prod. Owner's Manual (OM42D58U)"), with the 2.5 L A25A-FXS engine; 2025 Warranty and Maintenance Guide, Camry; Manuals and Warranties owner page (undated).
- General Motors, 2026 Chevrolet Silverado 1500 Owner Manual, "Selecting the Right Engine Oil", "Recommended Fluids and Lubricants" and Capacities; Chevrolet, Manuals and Guides (undated).
- Subaru, owner's manual MSA5M2208A, chapters 11-5 and 12-1 (the text names neither the model nor the model year; most of its pages are marked as edited 2 August 2021, and it describes a hybrid system).
- Hyundai, owner's manuals, 2023 Tucson, chapters 9 and 10, and 2022 Tucson, chapters 2 and 9.
- Kia, online owner's manuals: model code SK3, 2024, US English, Recommended lubricants and capacities; model code NQ5, 2024, general-region edition.
- Nissan, owner's manuals, 2025: Altima, Rogue, Frontier (pages marked Edit: 09/10/2024 for the Altima and 10/09/2024 for the Frontier); Manuals and Guides page (undated).
- Mazda, 2025 owner's manuals: CX-50, CX-90 and CX-90 PHEV. Infiniti, 2025 owner's manuals: QX50, QX80 and QX60 (pages marked Edit: 04/18/2024 for the QX50 and 09/26/2024 for the QX60; Mazda footers dated 14 February 2024 for the CX-50 and 9 May 2024 for the CX-90 and CX-90 PHEV).
- American Petroleum Institute: Engine Oil Licensing and Certification System (EOLCS); API Oil Categories; Latest Oil Categories and Classifications; Latest Oil Classifications (all undated).
- Chevron Lubricants, Havoline GF-7 Motor Oils (an oil maker's page about its own products, undated).
- U.S. Environmental Protection Agency, Managing, Reusing, and Recycling Used Oil, last updated 25 June 2026.
- What we could not read, and so did not quote: Honda's and Ford's owner's manual pages, Toyota's 2023 Warranty and Maintenance Guide, the manual pages of Acura, Volvo and Audi, the manual lookups of Volkswagen, BMW, Mercedes-Benz, Lexus, Mitsubishi and Genesis, and the GM Duramax diesel supplement. The only oil-company page quoted is Chevron's Havoline page; several other oil makers' pages could not be read.
- PulsCar homepage (publisher).
Prices verified: 11 November 2026 (this page carries no prices; see the oil change cost guide) · Technical documents verified: 11 November 2026
Saw a figure or a source that differs from this page? Email [email protected] with the source and its date.

